lkml.org 
[lkml]   [2005]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Patch of a new driver for kernel 2.4.x that need review
On Wed, 22 Jun 2005, Bouchard, Sebastien wrote:

> Hi,
>
> Here is a driver (only for 2.4.x) I've done to provide support of a hardware
> module (available on some ATCA board) used with telecom expension card on
> the new ATCA platform. This module provide redundant reference clock for
> telecom hardware with alarm handling when there is a new event (ex.: one of
> the ref clock is gone).
> This char driver provide IOCTL for configuration of this module and
> interrupt handler for processing alarm events.
>
> I send this driver so people in this mailing list can do a review of the
> code.
>

A few small comments below.


> Please reply me directly to my email, i'm not subscribed to the mailing
> list.
>
> Thanks
> Sebastien Bouchard
> Software designer
> Kontron Canada Inc.
> <mailto:sebastien.bouchard@ca.kontron.com>
> <http://www.kontron.com/>
>
>
> diff -ruN 2.4.31-ori/drivers/char/Config.in
> 2.4.31-mod/drivers/char/Config.in
> --- 2.4.31-ori/drivers/char/Config.in Sat Aug 7 19:26:04 2004
> +++ 2.4.31-mod/drivers/char/Config.in Wed Jun 22 09:34:57 2005
> @@ -401,4 +401,6 @@
> dep_tristate 'HP OB600 C/CT Pop-up mouse support' CONFIG_OBMOUSE
> $CONFIG_INPUT_MOUSEDEV
> fi
>
> +tristate 'Telecom clock support' CONFIG_TELCLOCK
> +
> endmenu
> diff -ruN 2.4.31-ori/drivers/char/Makefile 2.4.31-mod/drivers/char/Makefile
> --- 2.4.31-ori/drivers/char/Makefile Sat Aug 7 19:26:04 2004
> +++ 2.4.31-mod/drivers/char/Makefile Wed Jun 22 09:36:14 2005
> @@ -323,6 +323,7 @@
> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> obj-$(CONFIG_INDYDOG) += indydog.o
> obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
> +obj-$(CONFIG_TELCLOCK) += tlclk.o
>
> subdir-$(CONFIG_MWAVE) += mwave
> ifeq ($(CONFIG_MWAVE),y)
> diff -ruN 2.4.31-ori/drivers/char/tlclk.c 2.4.31-mod/drivers/char/tlclk.c
> --- 2.4.31-ori/drivers/char/tlclk.c Wed Dec 31 19:00:00 1969
> +++ 2.4.31-mod/drivers/char/tlclk.c Wed Jun 22 09:43:10 2005
> @@ -0,0 +1,470 @@
> +/*
> + * Telecom Clock driver for Wainwright board
> + *
> + * Copyright (C) 2005 Kontron Canada
> + *
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> + * NON INFRINGEMENT. See the GNU General Public License for more
> + * details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + * Send feedback to <sebastien.bouchard@ca.kontron.com>
> + *
> + * Description : This is the TELECOM CLOCK module driver for the ATCA
> platform.
> + */
> +#ifndef __KERNEL__
> +# define __KERNEL__
> +#endif
> +
> +#include <linux/config.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/sched.h>
> +#include <linux/kernel.h> /* printk() */
> +#include <linux/fs.h> /* everything... */
> +#include <linux/errno.h> /* error codes */
> +#include <linux/delay.h> /* udelay */
> +#include <asm/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/ioport.h>
> +#include <linux/devfs_fs_kernel.h> /* Devfs support */

In 2.6 devfs is in the process of being removed.. It'll probably stay in
2.4, but long term (if/when you move the driver to 2.6) it's probably not
worth bothering with.


> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +#include <linux/timer.h>
> +#include <linux/tqueue.h> /* interrupt task */
> +#include <asm/io.h> /* inb/outb */
> +
> +#include "tlclk.h" /* TELECOM IOCTL DEFINE */
> +
> +MODULE_AUTHOR("Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>");
> +MODULE_LICENSE("GPL");
> +
> +/* Telecom clock I/O register definition */
> +#define TLCLK_BASE 0xa08
> +#define TLCLK_REG0 TLCLK_BASE
> +#define TLCLK_REG1 TLCLK_BASE+1
> +#define TLCLK_REG2 TLCLK_BASE+2
> +#define TLCLK_REG3 TLCLK_BASE+3
> +#define TLCLK_REG4 TLCLK_BASE+4
> +#define TLCLK_REG5 TLCLK_BASE+5
> +#define TLCLK_REG6 TLCLK_BASE+6
> +#define TLCLK_REG7 TLCLK_BASE+7
> +
> +#define SET_PORT_BITS(port, mask, val) outb(((inb(port) & mask) | val),
> port)
> +
> +/* 0 = Dynamic allocation of the major device number */
> +#define TLCLK_MAJOR 252
> +
> +static int telclk_interrupt; /* Contain the interrupt used for telecom
> clock */
> +
> +static int int_events; /* Event that generate a interrupt */
> +static int got_event; /* if events processing have been done */
> +
> +static struct timer_list switchover_timer;
> +
> +struct tlclk_alarms *alarm_events;
> +
> +spinlock_t event_lock = SPIN_LOCK_UNLOCKED;
> +
> +/* DEVFS support or not */
> +#ifdef CONFIG_DEVFS_FS
> +devfs_handle_t devfs_handle;
> +#else
> +static int tlclk_major = TLCLK_MAJOR;
> +#endif
> +
> +static void switchover_timeout(unsigned long data);
> +void tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs);
> +
> +DECLARE_WAIT_QUEUE_HEAD(wq);
> +/*
> +* Function : Module I/O functions
> +* Description : Almost all the control stuff is done here, check I/O dn
> for help.
> +*/
> +static int
> +tlclk_ioctl(struct inode *inode,
> + struct file *filp, unsigned int cmd, unsigned long arg)
> +{
> + unsigned long flags;

Indent this variable properly with a tab.

> + unsigned char val;
> + val = (char) arg;

"val" is explicitly "unsigned char", yet your cast only casts to plain
"char" which may or may not be signed depending on platform. Cast it to
unsigned char if that's what it needs to be, or declare a plain char
variable and avoid the cast if both signed and unsigned char will do
equally well.


> +
> + if (_IOC_TYPE(cmd) != TLCLK_IOC_MAGIC)
> + return -ENOTTY;
> +
> + if (_IOC_NR(cmd) > TLCLK_IOC_MAXNR)
> + return -ENOTTY;
> +

I haven't checked the complexity of _IOC_TYPE(), but if it's more than
really trivial you might bennefit from assigning the result to a variable
just once and then test that variable twice, on the other hand, if it's
simple the above is just fine.


> + switch (cmd) {
> + case IOCTL_RESET:
> + SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
> + break;
> +
> + case IOCTL_MODE_SELECT:
> + SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
> + break;
> +
> + case IOCTL_REFALIGN:
> + /* GENERATING 0 to 1 transistion */
> + SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
> + udelay(2);
> + SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
> + udelay(2);
> + SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
> + break;
> +
> + case IOCTL_HARDWARE_SWITCHING:
> + SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
> + break;
> +
> + case IOCTL_HARDWARE_SWITCHING_MODE:
> + SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
> + break;
> +
> + case IOCTL_FILTER_SELECT:
> + SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
> + break;
> +
> + case IOCTL_SELECT_REF_FREQUENCY:
> + spin_lock_irqsave(&event_lock, flags);

Why is this line not indented as far as the others? Don't mix tabs and few
spaces, just indent by two tabs here.

> + SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
> + spin_unlock_irqrestore(&event_lock, flags);
> + break;
> +
> + case IOCTL_SELECT_REDUNDANT_CLOCK:
> + spin_lock_irqsave(&event_lock, flags);

Indentation...

> + SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
> + spin_unlock_irqrestore(&event_lock, flags);
> +
> + break;

Why the extra blank line before break; ???

> +
> + case IOCTL_SELECT_AMCB1_TRANSMIT_CLOCK:
> + if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
> + SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
> + SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
> + } else if (val >= CLK_8_592MHz) {
> + SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
> + switch (val) {
> + case CLK_8_592MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
> + break;
> + case CLK_11_184MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
> + break;
> + case CLK_34_368MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
> + break;
> + case CLK_44_736MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
> + break;
> + }
> + } else
> + SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
> + break;
> +
> + break;

One break will do.

> + case IOCTL_SELECT_AMCB2_TRANSMIT_CLOCK:
> + if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
> + SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
> + SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
> + } else if (val >= CLK_8_592MHz) {
> + SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
> + switch (val) {
> + case CLK_8_592MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
> + break;
> + case CLK_11_184MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
> + break;
> + case CLK_34_368MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
> + break;
> + case CLK_44_736MHz:
> + SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
> + break;
> + }
> + } else
> + SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
> + break;
> + break;

You really do like break it seems. A bit too much ;-)

> + case IOCTL_TEST_MODE:
> + SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
> + break;
> +

Why a blank line here before the next case when you have no breaks between
case's below? Be consistent - makes code easier on the eye to read when
it's consistent.

> + case IOCTL_ENABLE_CLKA0_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
> + break;
> + case IOCTL_ENABLE_CLKB0_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
> + break;
> + case IOCTL_ENABLE_CLKA1_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
> + break;
> + case IOCTL_ENABLE_CLKB1_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
> + break;
> + case IOCTL_ENABLE_CLK3A_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
> + break;
> + case IOCTL_ENABLE_CLK3B_OUTPUT:
> + SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
> + break;
> + case IOCTL_READ_ALARMS:
> + return (inb(TLCLK_REG2) & 0xf0);
> + break;
> + case IOCTL_READ_INTERRUPT_SWITCH:
> + return inb(TLCLK_REG6);
> + break;
> + case IOCTL_READ_CURRENT_REF:
> + return ((inb(TLCLK_REG1) & 0x08) >> 3);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +/*
> +* Function : Module Opening
> +* Description : Called when a program open the
> +* /dev/telclock file related to the module.
> +*/
> +static int
> +tlclk_open(struct inode *inode, struct file *filp)
> +{
> + int result;
> +#ifdef MODULE
> + if (!MOD_IN_USE) {
> + MOD_INC_USE_COUNT;
> +#endif
> + /* Make sure there is no interrupt pending will
> + * initialising interrupt handler */
> + inb(TLCLK_REG6);
> +
> + result = request_irq(telclk_interrupt, &tlclk_interrupt,
> + SA_SHIRQ, "telclock", tlclk_interrupt);
> + printk("\ntelclock: Reserving IRQ%d...\n",
> telclk_interrupt);
> + if (result == -EBUSY) {
> + printk(KERN_ERR
> + "telclock: Interrupt can't be reserved!\n");
> + return -EBUSY;
> + }
> + inb(TLCLK_REG6); /* Clear interrupt events */
> +#ifdef MODULE
> + } else
> + return -EBUSY;
> +#endif
> + return 0;
> +}
> +
> +/*
> +* Function : Module Releasing
> +* Description : Called when a program stop using the module.
> +*/
> +static int
> +tlclk_release(struct inode *inode, struct file *filp)
> +{
> + MOD_DEC_USE_COUNT;
> + if (!MOD_IN_USE)
> + free_irq(telclk_interrupt, tlclk_interrupt);
> + return 0;
> +}
> +
> +ssize_t
> +tlclk_read(struct file * filp, char *buf, size_t count, loff_t * f_pos)
> +{
> + int count0 = sizeof (struct tlclk_alarms);
^^^
no space here...

> + wait_event_interruptible(wq, got_event);
> + if (copy_to_user
> + (buf, (char *) alarm_events, sizeof (struct tlclk_alarms)))
^^^ ^^^
no space here. nor here..

Besides, the cast is superfluous, copy_to_user takes a void* as its second
argument, so just get rid of the cast.


> + return -EFAULT;
> +
> + memset(alarm_events, 0, sizeof (struct tlclk_alarms));

The space after sizeof should probably die... more elsewhere in the code
that I'm not pointing out explicitly.


> + got_event = 0;
> +
> + return count0;
> +}
> +
> +ssize_t
> +tlclk_write(struct file * filp, const char *buf, size_t count, loff_t *
> f_pos)
> +{
> + return 0;
> +}
> +
> +/*
> +* This is where you set what function is called when an action is done to
> your * /dev file.
> +*/
> +static struct file_operations tlclk_fops = {
> + read:tlclk_read,
> + write:tlclk_write,
> + ioctl:tlclk_ioctl,
> + open:tlclk_open,
> + release:tlclk_release,
> +
> +};

C99 initializers please.


> +/*
> +* Function : Module Initialisation
> +* Description : Called at module loading,
> +* all the OS registering stuff is her
> +*/
> +static int __init
> +tlclk_init(void)
> +{
> + alarm_events = kmalloc(sizeof (struct tlclk_alarms), GFP_KERNEL);
> +
> + if(!alarm_events)

Space after "if" like so: if (!alarm_events)

> + return -EBUSY;
> +
> + memset(alarm_events, 0, sizeof (struct tlclk_alarms));
> +
> +/* Read telecom clock IRQ number (Set by BIOS) */
> +
> + telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
> +
> + printk(KERN_WARNING "telclock: Reserving I/O region...\n");
> +
> + if (check_region(TLCLK_BASE, 8)) {

I don't recall how check_region/request_region worked in 2.4, but in 2.6
you just need to call request_region directly, check_region is no longer
used. That may not be true for 2.4, so I may be completely off the mark
here...

> + printk(KERN_ERR
> + "telclock: I/O region already used by another
> driver!\n");
> + return -EBUSY;
> + } else {
> + request_region(TLCLK_BASE, 8, "telclock");
> + }
> +
> +/* DEVFS or NOT? */
> +
> +#ifdef CONFIG_DEVFS_FS
> + devfs_handle = devfs_register(NULL, "telclock",
> + DEVFS_FL_AUTO_DEVNUM, TLCLK_MAJOR,
> + 0,
> + S_IFCHR | S_IRUGO | S_IWUGO,
> + &tlclk_fops, NULL);
> + if (!devfs_handle)
> + return -EBUSY;
> +#else
> + tlclk_major = register_chrdev(tlclk_major, "telclock", &tlclk_fops);
> +
> + if (tlclk_major < 0) {
> + printk(KERN_ERR "telclock: can't get major! %d\n",
> tlclk_major);
> + return tlclk_major;
> + }
> +#endif
> +
> + init_timer(&switchover_timer);
> + switchover_timer.function = switchover_timeout;
> + switchover_timer.data = 0;
> +
> + return 0;
> +}
> +
> +/*
> +* Function : Module Cleaning
>
> +* Description : Called when unloading the module
> +*/
> +static void __exit
> +tlclk_cleanup(void)
> +{
> +#ifdef CONFIG_DEVFS_FS
> + devfs_unregister(devfs_handle);
> +#else
> + unregister_chrdev(tlclk_major, "telclock");
> +#endif
> + release_region(TLCLK_BASE, 8);
> + del_timer_sync(&switchover_timer);
> + kfree(alarm_events);
> +
> +}
> +static void
> +switchover_timeout(unsigned long data)
> +{
> + if ((data & 1)) {
> + if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
> + alarm_events->switchover_primary++;
> + } else {
> + if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
> + alarm_events->switchover_secondary++;
> + }
> +
> + /* Alarm processing is done, wake up read task */
> + del_timer(&switchover_timer);
> + got_event = 1;
> + wake_up(&wq);
> +}
> +/*
> +* Function : Interrupt Handler
>
> +* Description :
> +* Handling of alarms interrupt.
> +*
> +*/
> +void
> +tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs)
> +{
> + unsigned long flags;
> + spin_lock_irqsave(&event_lock, flags);
> + int_events = inb(TLCLK_REG6); /* Read and clear interrupt events */

Please make lines stay within 80 columns... There are other long lines,
I'm just pointing out this one and trust you can locate the rest yourself.


> + spin_unlock_irqrestore(&event_lock, flags);
> +
> + /* Primary_Los changed from 0 to 1 ? */
> + if (int_events & PRI_LOS_01_MASK) {
> + if (inb(TLCLK_REG2) & SEC_LOST_MASK)
> + alarm_events->lost_clocks++;
> + else
> + alarm_events->lost_primary_clock++;
> + }
> +
> + /* Primary_Los changed from 1 to 0 ? */
> + if (int_events & PRI_LOS_10_MASK) {
> + alarm_events->primary_clock_back++;
> + spin_lock_irqsave(&event_lock, flags);
> + SET_PORT_BITS(TLCLK_REG1, 0xFE, 1);
> + spin_unlock_irqrestore(&event_lock, flags);
> + }
> + /* Secondary_Los changed from 0 to 1 ? */
> + if (int_events & SEC_LOS_01_MASK) {
> + if (inb(TLCLK_REG2) & PRI_LOST_MASK)
> + alarm_events->lost_clocks++;
> + else
> + alarm_events->lost_secondary_clock++;
> + }
> + /* Secondary_Los changed from 1 to 0 ? */
> + if (int_events & SEC_LOS_10_MASK) {
> + alarm_events->secondary_clock_back++;
> + spin_lock_irqsave(&event_lock, flags);
> + SET_PORT_BITS(TLCLK_REG1, 0xFE, 0);
> + spin_unlock_irqrestore(&event_lock, flags);
> + }
> + if (int_events & HOLDOVER_10_MASK)
> + alarm_events->pll_end_holdover++;
> +
> + if (int_events & UNLOCK_01_MASK)
> + alarm_events->pll_lost_sync++;
> +
> + if (int_events & UNLOCK_10_MASK)
> + alarm_events->pll_sync++;
> +
> + /* Holdover changed from 0 to 1 ? */
> + if (int_events & HOLDOVER_01_MASK) {
> + alarm_events->pll_holdover++;
> +
> + switchover_timer.expires = jiffies + 1; /* TIMEOUT in ~10ms
> */
> + switchover_timer.data = inb(TLCLK_REG1);
> + add_timer(&switchover_timer);
> + } else {
> + got_event = 1;
> + wake_up(&wq);
> + }
> +}
> +
> +module_init(tlclk_init);
> +module_exit(tlclk_cleanup);
> diff -ruN 2.4.31-ori/drivers/char/tlclk.h 2.4.31-mod/drivers/char/tlclk.h
> --- 2.4.31-ori/drivers/char/tlclk.h Wed Dec 31 19:00:00 1969
> +++ 2.4.31-mod/drivers/char/tlclk.h Wed Jun 22 09:43:10 2005
> @@ -0,0 +1,167 @@
> +/*
> + * Telecom Clock driver for Wainwright board
> + *
> + * Copyright (C) 2005 Kontron Canada
> + *
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
> + * NON INFRINGEMENT. See the GNU General Public License for more
> + * details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + * Send feedback to <sebastien.bouchard@ca.kontron.com>
> + *
> + */
> +
> +/* Ioctl definitions */
> +
> +/* Use 0xA1 as magic number */
> +#define TLCLK_IOC_MAGIC 0xA1
> +
> +/*Hardware Reset of the PLL */
> +
> +#define RESET_ON 0x00
> +#define RESET_OFF 0x01
> +#define IOCTL_RESET _IO(TLCLK_IOC_MAGIC, 1)
> +
> +#define IOCTL_REFALIGN _IO(TLCLK_IOC_MAGIC, 2)
> +
> +/* MODE SELECT */
> +
> +#define NORMAL_MODE 0x00
> +#define HOLDOVER_MODE 0x10
> +#define FREERUN_MODE 0x20
> +
> +#define IOCTL_MODE_SELECT _IOR(TLCLK_IOC_MAGIC, 3, char)
> +
> +/* FILTER SELECT */
> +
> +#define FILTER_6HZ 0x04
> +#define FILTER_12HZ 0x00
> +
> +#define IOCTL_FILTER_SELECT _IOR(TLCLK_IOC_MAGIC, 4, char)
> +
> +/* SELECT REFERENCE FREQUENCY */
> +
> +#define REF_CLK1_8kHz 0x00
> +#define REF_CLK2_19_44MHz 0x02
> +
> +#define IOCTL_SELECT_REF_FREQUENCY _IOR(TLCLK_IOC_MAGIC, 6, char)
> +
> +/* Select primary or secondary redundant clock */
> +
> +#define PRIMARY_CLOCK 0x00
> +#define SECONDARY_CLOCK 0x01
> +#define IOCTL_SELECT_REDUNDANT_CLOCK _IOR(TLCLK_IOC_MAGIC, 7, char)
> +
> +/* CLOCK TRANSMISSION DEFINE */
> +
> +#define CLK_8kHz 0xff
> +#define CLK_16_384MHz 0xfb
> +
> +#define CLK_1_544MHz 0x00
> +#define CLK_2_048MHz 0x01
> +#define CLK_4_096MHz 0x02
> +#define CLK_6_312MHz 0x03
> +#define CLK_8_192MHz 0x04
> +#define CLK_19_440MHz 0x06
> +
> +#define CLK_8_592MHz 0x08
> +#define CLK_11_184MHz 0x09
> +#define CLK_34_368MHz 0x0b
> +#define CLK_44_736MHz 0x0a
> +
> +#define IOCTL_SELECT_AMCB1_TRANSMIT_CLOCK _IOR(TLCLK_IOC_MAGIC, 9, char)
> +#define IOCTL_SELECT_AMCB2_TRANSMIT_CLOCK _IOR(TLCLK_IOC_MAGIC, 10, char)
> +
> +/* RECEIVED REFERENCE */
> +
> +#define AMC_B1 0
> +#define AMC_B2 1
> +
> +#define IOCTL_SELECT_RECEIVED_REF_CLK3A _IOR(TLCLK_IOC_MAGIC, 11, char)
> +#define IOCTL_SELECT_RECEIVED_REF_CLK3B _IOR(TLCLK_IOC_MAGIC, 12, char)
> +
> +/* OEM COMMAND - NOT IN FINAL VERSION */
> +
> +#define IOCTL_TEST_MODE _IO(TLCLK_IOC_MAGIC, 13)
> +
> +/* HARDWARE SWITCHING DEFINE */
> +
> +#define HW_ENABLE 0x80
> +#define HW_DISABLE 0x00
> +
> +#define IOCTL_HARDWARE_SWITCHING _IOR(TLCLK_IOC_MAGIC, 14, char)
> +
> +/* HARDWARE SWITCHING MODE DEFINE */
> +
> +#define PLL_HOLDOVER 0x40
> +#define LOST_CLOCK 0x00
> +
> +#define IOCTL_HARDWARE_SWITCHING_MODE _IOR(TLCLK_IOC_MAGIC, 15, char)
> +
> +/* CLOCK OUTPUT DEFINE */
> +
> +#define IOCTL_ENABLE_CLKA0_OUTPUT _IOR(TLCLK_IOC_MAGIC, 16, char)
> +#define IOCTL_ENABLE_CLKB0_OUTPUT _IOR(TLCLK_IOC_MAGIC, 17, char)
> +#define IOCTL_ENABLE_CLKA1_OUTPUT _IOR(TLCLK_IOC_MAGIC, 18, char)
> +#define IOCTL_ENABLE_CLKB1_OUTPUT _IOR(TLCLK_IOC_MAGIC, 19, char)
> +
> +#define IOCTL_ENABLE_CLK3A_OUTPUT _IOR(TLCLK_IOC_MAGIC, 20, char)
> +#define IOCTL_ENABLE_CLK3B_OUTPUT _IOR(TLCLK_IOC_MAGIC, 21, char)
> +
> +/* ALARMS DEFINE */
> +
> +#define UNLOCK_MASK 0x10
> +#define HOLDOVER_MASK 0x20
> +#define SEC_LOST_MASK 0x40
> +#define PRI_LOST_MASK 0x80
> +
> +#define IOCTL_READ_ALARMS _IO(TLCLK_IOC_MAGIC, 22)
> +
> +/* INTERRUPT CAUSE DEFINE */
> +
> +#define PRI_LOS_01_MASK 0x01
> +#define PRI_LOS_10_MASK 0x02
> +
> +#define SEC_LOS_01_MASK 0x04
> +#define SEC_LOS_10_MASK 0x08
> +
> +#define HOLDOVER_01_MASK 0x10
> +#define HOLDOVER_10_MASK 0x20
> +
> +#define UNLOCK_01_MASK 0x40
> +#define UNLOCK_10_MASK 0x80
> +
> +#define IOCTL_READ_INTERRUPT_SWITCH _IO(TLCLK_IOC_MAGIC, 23)
> +
> +#define IOCTL_READ_CURRENT_REF _IO(TLCLK_IOC_MAGIC, 25)
> +
> +/* MAX NUMBER OF IOCTL */
> +#define TLCLK_IOC_MAXNR 25
> +
> +struct tlclk_alarms {
> + unsigned int lost_clocks;
> + unsigned int lost_primary_clock;
> + unsigned int lost_secondary_clock;
> + unsigned int primary_clock_back;
> + unsigned int secondary_clock_back;
> + unsigned int switchover_primary;
> + unsigned int switchover_secondary;
> + unsigned int pll_holdover;
> + unsigned int pll_end_holdover;
> + unsigned int pll_lost_sync;
> + unsigned int pll_sync;

Please use tabs for indentation.


> +};
> +
> Sebastien Bouchard
> Software designer
> Kontron Canada Inc.
> <mailto:sebastien.bouchard@ca.kontron.com>
> <http://www.kontron.com/>



Kind regards,

Jesper Juhl


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-06-22 23:30    [W:0.245 / U:0.800 seconds]
©2003-2014 Jasper Spaans. Advertise on this site