lkml.org 
[lkml]   [2005]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[git patches] 2.6.x libata update
Please pull from the 'upstream-2.6.13' branch of
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git

to receive the changes described in the attachment.

No manual merges in this one, so it should be fine. I'll fix up
netdev-2.6.git next.


drivers/scsi/ahci.c | 100 +++++++++++++++++++++++++++++++++-----------
drivers/scsi/libata-core.c | 35 ++++++++++++++-
drivers/scsi/sata_promise.c | 26 +++++++++++
drivers/scsi/sata_svw.c | 27 +++++++----
include/linux/ata.h | 1
include/linux/libata.h | 1
6 files changed, 152 insertions(+), 38 deletions(-)



Brad Campbell:
libata basic detection and errata for PATA->SATA bridges

Jeff Garzik:
Merge /spare/repo/linux-2.6/
[libata] ahci: finish ATAPI support (hopefully)
Merge of /spare/repo/libata-dev branch bridge-detect
Automatic merge of /spare/repo/libata-dev branch svw
Merge of /spare/repo/libata-dev branch pdc20619
Automatic merge of /spare/repo/libata-dev branch ahci-msi
[libata] ahci: minor PCI MSI cleanup
Automatic merge of /spare/repo/linux-2.6/.git branch HEAD
Automatic merge of /spare/repo/linux-2.6/.git branch HEAD
[libata] ahci: Update for recent ->host_stop() API change
Automatic merge of rsync://rsync.kernel.org/.../torvalds/linux-2.6.git branch HEAD
Automatic merge of rsync://rsync.kernel.org/.../torvalds/linux-2.6.git branch HEAD
[libata ahci] support PCI MSI interrupt vector

Narendra Sankar:
sata_svw: bump version number
sata_svw: Add support for new device IDs

Tobias Lorenz:
[libata sata_promise] pdc20619 (PATA) support



diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -39,7 +39,7 @@
#include <asm/io.h>

#define DRV_NAME "ahci"
-#define DRV_VERSION "1.00"
+#define DRV_VERSION "1.01"


enum {
@@ -50,6 +50,7 @@ enum {
AHCI_CMD_SLOT_SZ = 32 * 32,
AHCI_RX_FIS_SZ = 256,
AHCI_CMD_TBL_HDR = 0x80,
+ AHCI_CMD_TBL_CDB = 0x40,
AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
AHCI_RX_FIS_SZ,
@@ -134,6 +135,9 @@ enum {
PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
+
+ /* hpriv->flags bits */
+ AHCI_FLAG_MSI = (1 << 0),
};

struct ahci_cmd_hdr {
@@ -183,6 +187,7 @@ static void ahci_qc_prep(struct ata_queu
static u8 ahci_check_status(struct ata_port *ap);
static u8 ahci_check_err(struct ata_port *ap);
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+static void ahci_remove_one (struct pci_dev *pdev);

static Scsi_Host_Template ahci_sht = {
.module = THIS_MODULE,
@@ -272,7 +277,7 @@ static struct pci_driver ahci_pci_driver
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
- .remove = ata_pci_remove_one,
+ .remove = ahci_remove_one,
};


@@ -506,7 +511,8 @@ static void ahci_fill_sg(struct ata_queu

static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
- struct ahci_port_priv *pp = qc->ap->private_data;
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
u32 opts;
const u32 cmd_fis_len = 5; /* five dwords */

@@ -518,18 +524,8 @@ static void ahci_qc_prep(struct ata_queu
opts = (qc->n_elem << 16) | cmd_fis_len;
if (qc->tf.flags & ATA_TFLAG_WRITE)
opts |= AHCI_CMD_WRITE;
-
- switch (qc->tf.protocol) {
- case ATA_PROT_ATAPI:
- case ATA_PROT_ATAPI_NODATA:
- case ATA_PROT_ATAPI_DMA:
+ if (is_atapi_taskfile(&qc->tf))
opts |= AHCI_CMD_ATAPI;
- break;
-
- default:
- /* do nothing */
- break;
- }

pp->cmd_slot[0].opts = cpu_to_le32(opts);
pp->cmd_slot[0].status = 0;
@@ -541,6 +537,10 @@ static void ahci_qc_prep(struct ata_queu
* a SATA Register - Host to Device command FIS.
*/
ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
+ if (opts & AHCI_CMD_ATAPI) {
+ memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len);
+ }

if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
@@ -795,8 +795,6 @@ static int ahci_host_init(struct ata_pro
return rc;
}
}
-
- hpriv->flags |= HOST_CAP_64;
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
@@ -879,15 +877,19 @@ static int ahci_host_init(struct ata_pro
}

/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
+static void pci_intx(struct pci_dev *pdev, int enable)
{
- u16 pci_command;
+ u16 pci_command, new;

pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
- if (pci_command & PCI_COMMAND_INTX_DISABLE) {
- pci_command &= ~PCI_COMMAND_INTX_DISABLE;
+
+ if (enable)
+ new = pci_command & ~PCI_COMMAND_INTX_DISABLE;
+ else
+ new = pci_command | PCI_COMMAND_INTX_DISABLE;
+
+ if (new != pci_command)
pci_write_config_word(pdev, PCI_COMMAND, pci_command);
- }
}

static void ahci_print_info(struct ata_probe_ent *probe_ent)
@@ -969,7 +971,7 @@ static int ahci_init_one (struct pci_dev
unsigned long base;
void *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
- int pci_dev_busy = 0;
+ int have_msi, pci_dev_busy = 0;
int rc;

VPRINTK("ENTER\n");
@@ -987,12 +989,17 @@ static int ahci_init_one (struct pci_dev
goto err_out;
}

- pci_enable_intx(pdev);
+ if (pci_enable_msi(pdev) == 0)
+ have_msi = 1;
+ else {
+ pci_intx(pdev, 1);
+ have_msi = 0;
+ }

probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
- goto err_out_regions;
+ goto err_out_msi;
}

memset(probe_ent, 0, sizeof(*probe_ent));
@@ -1025,6 +1032,9 @@ static int ahci_init_one (struct pci_dev
probe_ent->mmio_base = mmio_base;
probe_ent->private_data = hpriv;

+ if (have_msi)
+ hpriv->flags |= AHCI_FLAG_MSI;
+
/* initialize adapter */
rc = ahci_host_init(probe_ent);
if (rc)
@@ -1044,7 +1054,11 @@ err_out_iounmap:
iounmap(mmio_base);
err_out_free_ent:
kfree(probe_ent);
-err_out_regions:
+err_out_msi:
+ if (have_msi)
+ pci_disable_msi(pdev);
+ else
+ pci_intx(pdev, 0);
pci_release_regions(pdev);
err_out:
if (!pci_dev_busy)
@@ -1052,6 +1066,42 @@ err_out:
return rc;
}

+static void ahci_remove_one (struct pci_dev *pdev)
+{
+ struct device *dev = pci_dev_to_dev(pdev);
+ struct ata_host_set *host_set = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host_set->private_data;
+ struct ata_port *ap;
+ unsigned int i;
+ int have_msi;
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ ap = host_set->ports[i];
+
+ scsi_remove_host(ap->host);
+ }
+
+ have_msi = hpriv->flags & AHCI_FLAG_MSI;
+ free_irq(host_set->irq, host_set);
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ ap = host_set->ports[i];
+
+ ata_scsi_release(ap->host);
+ scsi_host_put(ap->host);
+ }
+
+ host_set->ops->host_stop(host_set);
+ kfree(host_set);
+
+ if (have_msi)
+ pci_disable_msi(pdev);
+ else
+ pci_intx(pdev, 0);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ dev_set_drvdata(dev, NULL);
+}

static int __init ahci_init(void)
{
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -1295,6 +1295,37 @@ err_out:
DPRINTK("EXIT, err\n");
}

+
+static inline u8 ata_dev_knobble(struct ata_port *ap)
+{
+ return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
+}
+
+/**
+ * ata_dev_config - Run device specific handlers and check for
+ * SATA->PATA bridges
+ * @ap: Bus
+ * @i: Device
+ *
+ * LOCKING:
+ */
+
+void ata_dev_config(struct ata_port *ap, unsigned int i)
+{
+ /* limit bridge transfers to udma5, 200 sectors */
+ if (ata_dev_knobble(ap)) {
+ printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
+ ap->id, ap->device->devno);
+ ap->udma_mask &= ATA_UDMA5;
+ ap->host->max_sectors = ATA_MAX_SECTORS;
+ ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
+ ap->device->flags |= ATA_DFLAG_LOCK_SECTORS;
+ }
+
+ if (ap->ops->dev_config)
+ ap->ops->dev_config(ap, &ap->device[i]);
+}
+
/**
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
@@ -1322,8 +1353,7 @@ static int ata_bus_probe(struct ata_port
ata_dev_identify(ap, i);
if (ata_dev_present(&ap->device[i])) {
found = 1;
- if (ap->ops->dev_config)
- ap->ops->dev_config(ap, &ap->device[i]);
+ ata_dev_config(ap,i);
}
}

@@ -4406,6 +4436,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_id_string);
+EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);

#ifdef CONFIG_PCI
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -59,6 +59,7 @@ enum {

board_2037x = 0, /* FastTrak S150 TX2plus */
board_20319 = 1, /* FastTrak S150 TX4 */
+ board_20619 = 2, /* FastTrak TX4000 */

PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */

@@ -147,6 +148,17 @@ static struct ata_port_info pdc_port_inf
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_ata_ops,
},
+
+ /* board_20619 */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
+ ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_ata_ops,
+ },
};

static struct pci_device_id pdc_ata_pci_tbl[] = {
@@ -172,6 +184,9 @@ static struct pci_device_id pdc_ata_pci_
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },

+ { PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20619 },
+
{ } /* terminate list */
};

@@ -636,6 +651,15 @@ static int pdc_ata_init_one (struct pci_
case board_2037x:
probe_ent->n_ports = 2;
break;
+ case board_20619:
+ probe_ent->n_ports = 4;
+
+ pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
+ pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
+
+ probe_ent->port[2].scr_addr = base + 0x600;
+ probe_ent->port[3].scr_addr = base + 0x700;
+ break;
default:
BUG();
break;
@@ -676,7 +700,7 @@ static void __exit pdc_ata_exit(void)


MODULE_AUTHOR("Jeff Garzik");
-MODULE_DESCRIPTION("Promise SATA TX2/TX4 low-level driver");
+MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -49,7 +49,7 @@
#endif /* CONFIG_PPC_OF */

#define DRV_NAME "sata_svw"
-#define DRV_VERSION "1.05"
+#define DRV_VERSION "1.06"

/* Taskfile registers offsets */
#define K2_SATA_TF_CMD_OFFSET 0x00
@@ -344,6 +344,7 @@ static int k2_sata_init_one (struct pci_
void *mmio_base;
int pci_dev_busy = 0;
int rc;
+ int i;

if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
@@ -421,11 +422,11 @@ static int k2_sata_init_one (struct pci_
probe_ent->mwdma_mask = 0x7;
probe_ent->udma_mask = 0x7f;

- /* We have 4 ports per PCI function */
- k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET);
- k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET);
- k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET);
- k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET);
+ /* different controllers have different number of ports - currently 4 or 8 */
+ /* All ports are on the same function. Multi-function device is no
+ * longer available. This should not be seen in any system. */
+ for (i = 0; i < ent->driver_data; i++)
+ k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);

pci_set_master(pdev);

@@ -445,11 +446,17 @@ err_out:
return rc;
}

-
+/* 0x240 is device ID for Apple K2 device
+ * 0x241 is device ID for Serverworks Frodo4
+ * 0x242 is device ID for Serverworks Frodo8
+ * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA
+ * controller
+ * */
static struct pci_device_id k2_sata_pci_tbl[] = {
- { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
+ { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+ { 0x1166, 0x024a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ }
};

diff --git a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -224,6 +224,7 @@ struct ata_taskfile {
};

#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
+#define ata_id_is_sata(id) ((id)[93] == 0)
#define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6))
#define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5))
#define ata_id_has_flush(id) ((id)[83] & (1 << 12))
diff --git a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -421,6 +421,7 @@ extern void ata_sg_init(struct ata_queue
extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
extern void ata_dev_id_string(u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
+extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_port *ap);
\
 
 \ /
  Last update: 2005-06-18 20:30    [W:0.052 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site