lkml.org 
[lkml]   [2005]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: PROBLEM: Devices behind PCI Express-to-PCI bridge not mapped
    Date
    On Friday 10 June 2005 16:48, Ivan Kokshaysky wrote:
    > I'm still not sure if it boots though...

    It does :-))

    And the devices on the dock appear to be working, too! I could only test the
    USB ports (my wife has currently taken posession of our FireWire MP3 player),
    but according to the attached log, the mappings look sensible.
    If you'd like me to perform other tests, let me know.

    As an aside, hotplugging the dock doesn't work, even though I have compiled in
    pciehp and shpchp: /sys/bus/pci/slots/ stays empty. The same with the ACPI
    hotplug driver. I do get some messages during boot.

    ...
    Evaluate _OSC Set fails. Status = 0x0005
    pciehp: add_host_bridge: status 5
    pciehp: Fails to gain control of native hot-plug
    ...

    When I attach the device, nothing happens in dmesg.

    In my daily usage, that's fine (I didn't plan on hotplugging the dock anyway).
    But if you want me to run more tests and try other patches on that aspect,
    I'm game.

    Many thanks for the quick help to all of you!

    Andreas


    Linux version 2.6.12-rc6 (root@grima) (gcc version 3.3.5-20050130 (Gentoo
    Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Fri Jun 10
    21:52:03 CEST 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
    BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
    BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
    BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
    BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
    BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    DMI present.
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:13 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
    IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Enabling APIC mode: Flat. Using 2 I/O APICs
    ACPI: HPET id: 0x8086a201 base: 0x0
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Built 1 zonelists
    Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root console=ttyS0
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 1995.039 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2069332k/2095616k available (3372k kernel code, 24988k reserved, 1544k
    data, 220k init, 1178112k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    checking if image is initramfs...it isn't (no cpio magic); looks like an
    initrd
    Freeing initrd memory: 2061k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
    PCI: Using MMCONFIG
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050309
    ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
    search_node c20da160 start_node c20da160 return_node 00000000
    ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
    search_node c20dada0 start_node c20dada0 return_node 00000000
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: Embedded Controller [EC0] (gpe 29)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    SCSI subsystem initialized
    Linux Kernel Card Services
    options: [pci] [cardbus] [pm]
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
    PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0
    PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0
    PCI: Cannot allocate resource region 4 of device 0000:03:02.0
    PCI: Cannot allocate resource region 4 of device 0000:03:02.1
    PCI: Cannot allocate resource region 0 of device 0000:03:02.2
    PCI: Cannot allocate resource region 4 of device 0000:03:03.0
    PCI: Cannot allocate resource region 4 of device 0000:03:03.1
    PCI: Cannot allocate resource region 0 of device 0000:03:03.2
    PCI: Cannot allocate resource region 0 of device 0000:03:04.0
    PCI: Cannot allocate resource region 1 of device 0000:03:04.0
    PCI: Cannot allocate resource region 0 of device 0000:03:05.0
    PCI: Cannot allocate resource region 0 of device 0000:03:06.0
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: c8100000-c81fffff
    PREFETCH window: d0000000-d7ffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bus 4, cardbus bridge: 0000:03:05.0
    IO window: 00003000-00003fff
    IO window: 00004000-00004fff
    PREFETCH window: 80000000-81ffffff
    MEM window: 88000000-89ffffff
    PCI: Bridge: 0000:02:00.0
    IO window: 3000-5fff
    MEM window: 88000000-8affffff
    PREFETCH window: 80000000-81ffffff
    PCI: Bridge: 0000:00:1c.2
    IO window: 3000-5fff
    MEM window: 88000000-8affffff
    PREFETCH window: 80000000-81ffffff
    PCI: Bus 7, cardbus bridge: 0000:06:09.0
    IO window: 00006000-00006fff
    IO window: 00007000-00007fff
    PREFETCH window: 82000000-83ffffff
    MEM window: 8c000000-8dffffff
    PCI: Bus 11, cardbus bridge: 0000:06:09.1
    IO window: 00008000-00008fff
    IO window: 00009000-00009fff
    PREFETCH window: 84000000-85ffffff
    MEM window: 8e000000-8fffffff
    PCI: Bus 15, cardbus bridge: 0000:06:09.3
    IO window: 0000a000-0000afff
    IO window: 0000b000-0000bfff
    PREFETCH window: 86000000-87ffffff
    MEM window: 90000000-91ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: 6000-bfff
    MEM window: c8400000-c84fffff
    PREFETCH window: 82000000-87ffffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Device 0000:00:1c.0 not available because of resource collisions
    PCI: Device 0000:00:1c.1 not available because of resource collisions
    PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31
    ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Enabling device 0000:06:09.3 (0080 -> 0083)
    ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18
    Simple Boot Flag at 0x36 set to 0x1
    Machine check exception polling timer started.
    audit: initializing netlink socket (disabled)
    audit(1118433907.573:0): initialized
    highmem bounce pool size: 64 pages
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.22 [Flags: R/O].
    Initializing Cryptographic API
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: add_host_bridge: status 5
    pciehp: Fails to gain control of native hot-plug
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    assign_interrupt_mode Found MSI capability
    PCI: Device 0000:00:1c.0 not available because of resource collisions
    PCI: Device 0000:00:1c.1 not available because of resource collisions
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    assign_interrupt_mode Found MSI capability
    ACPI: AC Adapter [ACAD] (on-line)
    ACPI: Battery Slot [BAT1] (battery absent)
    ACPI: Battery Slot [BAT2] (battery absent)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Thermal Zone [THRM] (59 C)
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12
    Linux agpgart interface v0.101 (c) Dave Jones
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 32
    parpor t: PnPBIOS parpt0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
    lp0: using parport0 (interrupt-driven).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    loop: loaded (max 8 devices)
    pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
    tg3.c:v3.29 (May 23, 2005)
    ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
    eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit)
    10/100/1000BaseT Ethernet 00:c0:9f:75:57:33
    eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
    eth0: dma_rwctrl[763f0000]
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    ahci: probe of 0000:00:1f.2 failed with error -12
    ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
    ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
    ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
    ata1: dev 0 configured for UDMA/100
    scsi0 : ata_piix
    Vendor: ATA Model: ST9100823A Rev: 3.01
    Type: Direct-Access ANSI SCSI revision: 05
    ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
    ata2: dev 0 ATAPI, max UDMA/33
    ata2: dev 0 configured for UDMA/33
    scsi1 : ata_piix
    Vendor: HL-DT-ST Model: DVDRAM GMA-4080N Rev: 0H35
    Type: CD-ROM ANSI SCSI revision: 05
    SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
    SCSI device sda: drive cache: write back
    SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
    SCSI device sda: drive cache: write back
    sda: sda1 sda2 sda3
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
    Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
    ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 30
    ohci1394: fw-host0: Remapped memory spaces reg 0xf8834000
    ohci1394: fw-host0: Soft reset finished
    ohci1394: fw-host0: Iso contexts reg: 000000a8 implemented: 0000000f
    ohci1394: fw-host0: 4 iso receive contexts available
    ohci1394: fw-host0: Iso contexts reg: 00000098 implemented: 000000ff
    ohci1394: fw-host0: 8 iso transmit contexts available
    ohci1394: fw-host0: Receive DMA ctx=0 initialized
    ohci1394: fw-host0: Receive DMA ctx=0 initialized
    ohci1394: fw-host0: Transmit DMA ctx=0 initialized
    ohci1394: fw-host0: Transmit DMA ctx=1 initialized
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[30] MMIO=[8a005000-8a0057ff]
    Max Packet=[2048]
    ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 19
    ohci1394: fw-host1: Remapped memory spaces reg 0xf8846000
    ohci1394: fw-host1: Soft reset finished
    ohci1394: fw-host1: Iso contexts reg: 000000a8 implemented: 0000000f
    ohci1394: fw-host1: 4 iso receive contexts available
    ohci1394: fw-host1: Iso contexts reg: 00000098 implemented: 000000ff
    ohci1394: fw-host1: 8 iso transmit contexts available
    ohci1394: fw-host1: Receive DMA ctx=0 initialized
    ohci1394: fw-host1: Receive DMA ctx=0 initialized
    ohci1394: fw-host1: Transmit DMA ctx=0 initialized
    ohci1394: fw-host1: Transmit DMA ctx=1 initialized
    ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8415000-c84157ff]
    Max Packet=[2048]
    ieee1394: raw1394: /dev/raw1394 device initialized
    sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31
    Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50]
    yenta 0000:03:05.0: Preassigned resource 0 busy, reconfiguring...
    yenta 0000:03:05.0: no resource of type 1200 available, trying to continue...
    yenta 0000:03:05.0: Preassigned resource 1 busy, reconfiguring...
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66
    Yenta: ISA IRQ mask 0x0000, PCI irq 31
    Socket status: 30000006
    ohci1394: fw-host0: IntEvent: 00020010
    ohci1394: fw-host0: irq_handler: Bus reset requested
    ohci1394: fw-host0: Cancel request received
    ohci1394: fw-host0: Got RQPkt interrupt status=0x00008409
    ohci1394: fw-host0: IntEvent: 00010000
    ohci1394: fw-host0: SelfID interrupt received (phyid 0, root)
    ohci1394: fw-host0: SelfID packet 0x807f8a52 received
    ohci1394: fw-host0: SelfID for this node is 0x807f8a52
    ohci1394: fw-host0: SelfID complete
    ohci1394: fw-host0: PhyReqFilter=ffffffffffffffff
    ohci1394: fw-host0: Single packet rcv'd
    ohci1394: fw-host1: IntEvent: 00020010
    ohci1394: fw-host1: irq_handler: Bus reset requested
    ohci1394: fw-host1: Cancel request received
    ohci1394: fw-host1: Got RQPkt interrupt status=0x00008409
    ohci1394: fw-host1: IntEvent: 00010000
    ohci1394: fw-host1: SelfID interrupt received (phyid 0, root)
    ohci1394: fw-host1: SelfID packet 0x807f8842 received
    ohci1394: fw-host1: SelfID for this node is 0x807f8842
    ohci1394: fw-host1: SelfID complete
    ohci1394: fw-host1: PhyReqFilter=ffffffffffffffff
    ohci1394: fw-host1: Single packet rcv'd
    ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18
    Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
    yenta 0000:06:09.0: Preassigned resource 0 busy, reconfiguring...
    yenta 0000:06:09.0: no resource of type 1200 available, trying to continue...
    yenta 0000:06:09.0: Preassigned resource 1 busy, reconfiguring...
    Yenta O2: res at 0x94/0xD4: ea/00
    Yenta O2: enabling read prefetch/write burst
    Yenta: ISA IRQ mask 0x0438, PCI irq 18
    Socket status: 30000006
    ohci1394: fw-host0: Inserting packet for node 0-63:1023, tlabel=0, tcode=0x0,
    speed=0
    ohci1394: fw-host0: Starting transmit DMA ctx=0
    ohci1394: fw-host0: IntEvent: 00000001
    ohci1394: fw-host0: Got reqTxComplete interrupt status=0x00008011
    ohci1394: fw-host0: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0
    data=0x1F0000C0 ctx=0
    ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18
    Yenta: CardBus bridge found at 0000:06:09.1 [1025:0070]
    yenta 0000:06:09.1: Preassigned resource 1 busy, reconfiguring...
    Yenta: ISA IRQ mask 0x0438, PCI irq 18
    Socket status: 30000006
    ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18
    Yenta: CardBus bridge found at 0000:06:09.3 [1025:0070]
    yenta 0000:06:09.3: Preassigned resource 1 busy, reconfiguring...
    Yenta: ISA IRQ mask 0x0438, PCI irq 18
    Socket status: 30000410
    ohci1394: fw-host1: Inserting packet for node 1-63:1023, tlabel=0, tcode=0x0,
    speed=0
    ohci1394: fw-host1: Starting transmit DMA ctx=0
    ohci1394: fw-host1: IntEvent: 00000001
    ohci1394: fw-host1: Got reqTxComplete interrupt status=0x00008011
    ohci1394: fw-host1: Packet sent to node 63 tcode=0x0 tLabel=0 ack=0x11 spd=0
    data=0x1F0000C0 ctx=0
    usbmon: debugs is not available
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
    USB2 EHCI Controller
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8004000
    ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    usb usb1: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2
    EHCI Controller
    usb usb1: Manufacturer: Linux 2.6.12-rc6 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1d.7
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    ACPI: PCI Interrupt 0000:03:02.2[C] -> GSI 26 (level, low) -> IRQ 26
    ehci_hcd 0000:03:02.2: VIA Technologies, Inc. USB 2.0
    ehci_hcd 0000:03:02.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:03:02.2: irq 26, io mem 0x8a005800
    ehci_hcd 0000:03:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    usb usb2: Product: VIA Technologies, Inc. USB 2.0
    usb usb2: Manufacturer: Linux 2.6.12-rc6 ehci_hcd
    usb usb2: SerialNumber: 0000:03:02.2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:03:03.2[C] -> GSI 29 (level, low) -> IRQ 29
    ehci_hcd 0000:03:03.2: VIA Technologies, Inc. USB 2.0 (#2)
    ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:03:03.2: irq 29, io mem 0x8a005900
    ehci_hcd 0000:03:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    usb usb3: Product: VIA Technologies, Inc. USB 2.0 (#2)
    usb usb3: Manufacturer: Linux 2.6.12-rc6 ehci_hcd
    usb usb3: SerialNumber: 0000:03:03.2
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
    USB UHCI #1
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
    uhci_hcd 0000:00:1d.0: detected 2 ports
    usb usb4: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
    UHCI #1
    usb usb4: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb4: SerialNumber: 0000:00:1d.0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
    USB UHCI #2
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
    uhci_hcd 0000:00:1d.1: detected 2 ports
    usb usb5: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
    UHCI #2
    usb usb5: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb5: SerialNumber: 0000:00:1d.1
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
    USB UHCI #3
    usb 4-2: new full speed USB device using uhci_hcd and address 2
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
    uhci_hcd 0000:00:1d.2: detected 2 ports
    usb usb6: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
    UHCI #3
    usb usb6: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb6: SerialNumber: 0000:00:1d.2
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
    USB UHCI #4
    usb 4-2: Product: USB Audio
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
    uhci_hcd 0000:00:1d.3: detected 2 ports
    usb usb7: Product: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB
    UHCI #4
    usb usb7: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb7: SerialNumber: 0000:00:1d.3
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 24 (level, low) -> IRQ 24
    uhci_hcd 0000:03:02.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller
    uhci_hcd 0000:03:02.0: new USB bus registered, assigned bus number 8
    uhci_hcd 0000:03:02.0: irq 24, io base 0x00005040
    uhci_hcd 0000:03:02.0: detected 2 ports
    usb usb8: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    usb usb8: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb8: SerialNumber: 0000:03:02.0
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 25 (level, low) -> IRQ 25
    uhci_hcd 0000:03:02.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (#2)
    uhci_hcd 0000:03:02.1: new USB bus registered, assigned bus number 9
    uhci_hcd 0000:03:02.1: irq 25, io base 0x00005060
    uhci_hcd 0000:03:02.1: detected 2 ports
    usb usb9: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    (#2)
    usb usb9: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb9: SerialNumber: 0000:03:02.1
    hub 9-0:1.0: USB hub found
    hub 9-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 27 (level, low) -> IRQ 27
    uhci_hcd 0000:03:03.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (#3)
    uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 10
    uhci_hcd 0000:03:03.0: irq 27, io base 0x00005080
    uhci_hcd 0000:03:03.0: detected 2 ports
    usb usb10: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    (#3)
    usb usb10: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb10: SerialNumber: 0000:03:03.0
    hub 10-0:1.0: USB hub found
    hub 10-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 28 (level, low) -> IRQ 28
    uhci_hcd 0000:03:03.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
    Controller (#4)
    uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 11
    uhci_hcd 0000:03:03.1: irq 28, io base 0x000050a0
    uhci_hcd 0000:03:03.1: detected 2 ports
    usb usb11: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    (#4)
    usb usb11: Manufacturer: Linux 2.6.12-rc6 uhci_hcd
    usb usb11: SerialNumber: 0000:03:03.1
    hub 11-0:1.0: USB hub found
    hub 11-0:1.0: 2 ports detected
    Initializing USB Mass Storage driver...
    usb 9-1: new low speed USB device using uhci_hcd and address 2
    usb 9-1: Product: Trackball
    usb 9-1: Manufacturer: Logitech
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    input: USB HID v1.00 Device [USB Audio] on usb-0000:00:1d.0-2
    input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:03:02.1-1
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.01:USB HID core driver
    usbcore: registered new driver auerswald
    mice: PS/2 mouse device common for all mice
    i2c /dev entries driver
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
    NET: Registered protocol family 2
    IP: routing cache hash table of 16384 buckets, 128Kbytes
    TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    ip_conntrack version 2.1 (8192 buckets, 65536 max) - 212 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
    http://snsowman.net/projebles: (C) 2002 David S. Miller
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI wakeup devices:
    AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC
    ACPI: (supports S0 S3 S4 S5)
    RAMDISK: Compressed image found at block 0
    input: AT Translated Set 2 keyboard on isa0060/serio0
    VFS: Mounted root (ext2 filesystem) readonly.
    Freeing unused kernel memory: 220k freed
    initrd: Remounting / read/write
    mount: /etc/mtab: No such file or directory
    initrd: Mounting /proc
    initrd: Finding device mapper major and minor numbers (10,62)
    initrd: Activating LVM2 volumes
    4 logical volume(s) in volume group "vg0" now active
    initrd: Checking root filesystem /dev/vg0/root
    WARNING: couldn't open /etc/fstab: No such file or directory
    Reiserfs super block in block 16 on 0xfd00 of format 3.6 with standard journal
    Blocks (total/free): 2621440/235168 by 409Synaptics Touchpad, model: 1, fw:
    5.9, id: 0x126eb1, caps: 0xa04713/0x4000
    6 bytes
    Filesysinput: SynPS/2 Synaptics TouchPad on isa0060/serio4
    tem is clean
    Replaying journal..
    Reiserfs journal '/dev/vg0/root' in blocks [18..8211]: 0 transactions replayed
    Checking internal tree..finished
    ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
    initrd: MountingReiserFS: dm-0: using ordered data mode
    root filesystemReiserFS: dm-0: journal params: device dm-0, size 8192,
    journal first block 18, max trans len 1024, max batch 900, max commit age 30,
    max trans age 30
    /dev/vg0/root rReiserFS: dm-0: checking transaction log (dm-0)
    w
    ReiserFS: dm-0: Using r5 hash to sort names
    initrd: Copying node for device mapper (/dev/mapper/control)
    initrd: Moving /proc to /rootvol/proc
    initrd: Changing roots
    initrd: Making device nodes in lvm root fs
    initrd: Unmounting /proc
    initrd: Remounting lvm root fs readonly
    initrd: Proceeding with boot...
    INIT: version 2.86 booting
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-06-10 22:54    [W:0.061 / U:62.056 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site