![]() | |||||||||||||
Messages in this thread |
Rene Herman wrote: > David Brownell wrote: >> The experiment: verify that only the RUN bit is set on your machine >> too. If "Periodic" and/or "Async" bits are set, then the controller >> is _supposed_ to be issuing DMA transfers over PCI, so less bandwidth >> will be available. Otherwise, not. [ snip ] > and one after switching on the USB2 HDD, when the hdparm result for hda > has dropped to 42 MB/s: > > === > bus pci, device 0000:00:09.2 (driver 10 Dec 2004) > EHCI 1.00, hcd state 1 > structural params 0x00002204 > capability params 0x00006872 > status a008 Async Recl FLR Only see that "Async" now while rereading. Did you mean that one? If so, I'm right now catting the registers file and that "Async" is toggling on and off continuously. 4 cats in a row: status 0008 FLR status 8008 Async FLR status a008 Async Recl FLR status 0008 FLR Rene. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||||
| Last update: 2005-06-02 00:46 [from the cache] ©2003-2008 | |||||||||||||