Messages in this thread | | | Date | Mon, 30 May 2005 14:37:06 +0200 | From | Jens Axboe <> | Subject | Re: [PATCH] SATA NCQ support |
| |
On Mon, May 30 2005, Jens Axboe wrote: > On Mon, May 30 2005, Jens Axboe wrote: > > > People actually tend to report that IDE drives are *faster*. Until > > > they're told they have to disable write-caching on their IDE drives to > > > get a fair comparison, then the performance is absolutely abysmal. The > > > interesting thing is that SCSI drives don't seem to take much of a > > > performance hit from having write-caching disabled while IDE drives > > > do. > > > > NCQ will surely lessen the impact of disabling write caching, how much > > still remains to be seen. You could test, if you have the hardware :) > > Real life testing is more interesting than benchmarks. > > With a few simple tests, I'm unable to show any write performance > improvement with write back caching off and NCQ (NCQ with queueing depth > of 1 and 16 tested). I get a steady 0.55-0.57MiB/sec with 8 threads > random writes, a little over 5MiB/sec with sequential writes. > > Reads are _much_ nicer. Sequential read with 8 threads are 23% faster > with a queueing depth of 16 than 1, random reads are 85% (!!) faster at > depth 16 than 1. > > Testing was done with the noop io scheduler this time, to only show NCQ > benefits outside of what the io scheduler can do for reordering. > > This is with a Maxtor 7B300S0 drive. I would have posted results for a > Seagate ST3120827AS as well, but that drive happily ignores any attempt > to turn off write back caching. To top things off, it even accepts FUA > writes but ignores that as well (they still go to cache).
Actually, I partly take that back. The Seagate _does_ honor drive write back caching disable and it does show a nice improvement with NCQ for that case. Results are as follows:
8 thread io case, 4kb block size, noop io scheduler, ST3120827AS.
Write cache off:
Depth 1 Depth 30 Diff Seq read: 18.94 21.51 + 14% Ran read: 0.86 1.24 + 44% Seq write: 6.58 19.30 + 193% Ran write: 1.00 1.27 + 27%
Write cache on:
Depth 1 Depth 30 Diff Seq read: 18.78 21.58 + 15% Ran read: 0.84 1.20 + 43% Seq write: 24.49 23.26 - 5% Ran write: 1.55 1.63 + 5%
Huge benefit on writes with NCQ when write back caching is off, with it on I think the deviation is within standard jitter of this benchmark.
-- Jens Axboe
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |