lkml.org 
[lkml]   [2005]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 02/16] 3c59x: only put the device into D3 when we're actually using WOL
During a warm boot the device is in D3 and has troubles coming out of it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/net/3c59x.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)

--- linux-2.6.11.10.orig/drivers/net/3c59x.c 2005-05-20 09:34:18.788560304 -0700
+++ linux-2.6.11.10/drivers/net/3c59x.c 2005-05-20 09:34:22.644974040 -0700
@@ -1581,7 +1581,8 @@

if (VORTEX_PCI(vp)) {
pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
- pci_restore_state(VORTEX_PCI(vp));
+ if (vp->pm_state_valid)
+ pci_restore_state(VORTEX_PCI(vp));
pci_enable_device(VORTEX_PCI(vp));
}

@@ -2741,6 +2742,7 @@
outl(0, ioaddr + DownListPtr);

if (final_down && VORTEX_PCI(vp)) {
+ vp->pm_state_valid = 1;
pci_save_state(VORTEX_PCI(vp));
acpi_set_WOL(dev);
}
@@ -3243,9 +3245,10 @@
outw(RxEnable, ioaddr + EL3_CMD);

pci_enable_wake(VORTEX_PCI(vp), 0, 1);
+
+ /* Change the power state to D3; RxEnable doesn't take effect. */
+ pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
}
- /* Change the power state to D3; RxEnable doesn't take effect. */
- pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
}


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-05-24 01:52    [W:0.107 / U:4.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site