lkml.org 
[lkml]   [2005]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: What happened to Cyrix 6x86 support in 2.6?
    El Sat, 21 May 2005 16:25:56 +0200,
    Gregor Jasny <gjasny@web.de> escribió:

    > But when I boot a Linux 2.6 kernel with CONFIG_M586=y it recognizes only a 486.

    Seems to work well here, same config.

    processor : 0
    vendor_id : CyrixInstead
    cpu family : 6
    model : 2
    model name : 6x86MX 3x Core/Bus Clock
    stepping : 7
    cpu MHz : 200.512


    Linux version 2.6.12-rc4-mm2 (diego@estel) (gcc versión 3.3.5 (Debian 1:3.3.5-12)) #14 Sat May 21 17:46:33 CEST 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000002000000 (usable)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    32MB LOWMEM available.
    On node 0 totalpages: 8192
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 4096 pages, LIFO batch:1
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.0 present.
    Allocating PCI resources starting at 02000000 (gap: 02000000:fdff0000)
    Built 1 zonelists
    No local APIC present or hardware disabled
    mapped APIC to ffffd000 (01041000)
    Initializing CPU#0
    Kernel command line: profile=2 ro root=/dev/hda1
    kernel profiling enabled (shift: 2)
    CPU 0 irqstacks, hard=c0325000 soft=c0324000
    PID hash table entries: 256 (order: 8, 4096 bytes)
    Detected 200.512 MHz processor.
    Using tsc for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Memory: 27992k/32768k available (1513k kernel code, 4344k reserved, 480k data, 172k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 401.53 BogoMIPS (lpj=200766)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0080a135 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0080a135 00000000 00000000 00000000 00000000 00000000 00000000
    CPU: After all inits, caps: 0080a135 00000000 00000000 00000004 00000000 00000000 00000000
    CPU: Cyrix 6x86MX 3x Core/Bus Clock stepping 07
    Checking 'hlt' instruction... OK.
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=0
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    PnPBIOS: Scanning system for PnP BIOS support...
    PnPBIOS: Found PnP BIOS installation structure at 0xc00fc070
    PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc098, dseg 0xf0000
    PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:01.1
    PCI: Cannot allocate resource region 4 of device 0000:00:01.1
    pnp: the driver 'system' has been registered
    pnp: match found with the PnP device '00:07' and the driver 'system'
    pnp: match found with the PnP device '00:09' and the driver 'system'
    pnp: 00:09: ioport range 0x208-0x20f has been reserved
    IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
    isapnp: Scanning for PnP cards...
    pnp: Calling quirk for 01:01.03
    pnp: CMI8330 quirk - fixing interrupts and dma
    isapnp: Card 'CMI8330. Audio Adapter'
    isapnp: 1 Plug & Play card detected total
    lp: driver loaded but no devices found
    Real Time Clock Driver v1.12
    Non-volatile memory driver v1.2
    ppdev: user-space parallel port driver
    pnp: the driver 'i8042 kbd' has been registered
    pnp: match found with the PnP device '00:04' and the driver 'i8042 kbd'
    pnp: the driver 'i8042 aux' has been registered
    PNP: PS/2 controller doesn't have AUX irq; using default 0xc
    PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
    pnp: the driver 'serial' has been registered
    pnp: match found with the PnP device '00:0a' and the driver 'serial'
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    pnp: the driver 'parport_pc' has been registered
    pnp: match found with the PnP device '00:0c' and the driver 'parport_pc'
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP]
    lp0: using parport0 (interrupt-driven).
    lp0: console ready
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    FDC 0 is a post-1991 82077
    loop: loaded (max 8 devices)
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:00:0f.0: 3Com PCI 3c905 Boomerang 100baseTx at 0x6000. Vers LK1.1.19
    eth0: Dropping NETIF_F_SG since no checksum feature.
    PPP generic driver version 2.4.2
    PPP BSD Compression module registered
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    SIS5513: IDE controller at PCI slot 0000:00:01.1
    SIS5513: chipset revision 193
    SIS5513: not 100% native mode: will probe irqs later
    SIS5513: SiS5571 ATA 16 controller
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
    Probing IDE interface ide0...
    hda: ST32122A, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    Probing IDE interface ide1...
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 128KiB
    hda: 4124736 sectors (2111 MB) w/128KiB Cache, CHS=4092/16/63
    hda: cache flushes not supported
    hda: hda1 hda2
    mice: PS/2 mouse device common for all mice
    oprofile: using timer interrupt.
    NET: Registered protocol family 2
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    TCP: Hash tables configured (established 2048 bind 2048)
    ip_conntrack version 2.1 (256 buckets, 2048 max) - 212 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem) readonly.
    Freeing unused kernel memory: 172k freed
    kjournald starting. Commit interval 5 seconds
    Adding 96760k swap on /dev/hda2. Priority:-1 extents:1
    EXT3-fs warning: checktime reached, running e2fsck is recommended
    EXT3 FS on hda1, internal journal
    ttyS1: LSR safety check engaged!
    ttyS1: LSR safety check engaged!
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-05-21 18:13    [W:0.028 / U:120.000 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site