lkml.org 
[lkml]   [2005]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: iomapping a big endian area
From
Date
OK, I sent the patch off to Andrew.  To complete the original problem,
the attached is the patch that uses it in the parisc lasi driver
(although, actually, it sets up 53c700 to work everywhere including BE
on a LE system).

I changed some of the flags around to reflect the fact that we now have
generic BE support in the driver (rather than the more limited
force_le_on_be flag).

James

===== drivers/scsi/53c700.h 1.25 vs edited =====
--- 1.25/drivers/scsi/53c700.h 2005-04-04 09:55:44 -05:00
+++ edited/drivers/scsi/53c700.h 2005-04-04 15:39:01 -05:00
@@ -177,10 +177,10 @@
struct device *dev;
__u32 dmode_extra; /* adjustable bus settings */
__u32 differential:1; /* if we are differential */
-#ifdef CONFIG_53C700_LE_ON_BE
+#ifdef CONFIG_53C700_BE
/* This option is for HP only. Set it if your chip is wired for
* little endian on this platform (which is big endian) */
- __u32 force_le_on_be:1;
+ __u32 chip_is_be:1;
#endif
__u32 chip710:1; /* set if really a 710 not 700 */
__u32 burst_disable:1; /* set to 1 to disable 710 bursting */
@@ -229,24 +229,29 @@
/*
* 53C700 Register Interface - the offset from the Selected base
* I/O address */
-#ifdef CONFIG_53C700_LE_ON_BE
-#define bE (hostdata->force_le_on_be ? 0 : 3)
-#define bSWAP (hostdata->force_le_on_be)
-/* This is terrible, but there's no raw version of ioread32. That means
- * that on a be board we swap twice (once in ioread32 and once again to
- * get the value correct) */
-#define bS_to_io(x) ((hostdata->force_le_on_be) ? (x) : cpu_to_le32(x))
-#elif defined(__BIG_ENDIAN)
+#ifdef CONFIG_53C700_BE
+#define bE (hostdata->chip_is_be ? 3: 0)
+#ifdef __BIG_ENDIAN
+#define bSWAP (!hostdata->chip_is_be)
+#else
+#define bSWAP (hostdata->chip_is_be);
+#endif
+#define NCR_ioread32(x) ((hostdata->chip_is_be) ? ioread32be(x) : ioread32(x))
+#define NCR_iowrite32(v, x) \
+ ((hostdata->chip_is_be) ? iowrite32be((v), (x)) : iowrite32((v), (x)))
+#else
+#define NCR_ioread32(x) ioread32(x)
+#define NCR_iowrite32(v, x) iowrite32((v), (x))
+#if defined(__BIG_ENDIAN)
#define bE 3
#define bSWAP 0
-#define bS_to_io(x) (x)
#elif defined(__LITTLE_ENDIAN)
#define bE 0
#define bSWAP 0
-#define bS_to_io(x) (x)
#else
#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
#endif
+#endif
#define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x))
#define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x))

@@ -460,14 +465,13 @@
{
const struct NCR_700_Host_Parameters *hostdata
= (struct NCR_700_Host_Parameters *)host->hostdata[0];
- __u32 value = ioread32(hostdata->base + reg);
+ __u32 value = NCR_ioread32(hostdata->base + reg);
#if 1
/* sanity check the register */
- if((reg & 0x3) != 0)
- BUG();
+ BUG_ON((reg & 0x3) != 0);
#endif

- return bS_to_io(value);
+ return value;
}

static inline void
@@ -487,11 +491,10 @@

#if 1
/* sanity check the register */
- if((reg & 0x3) != 0)
- BUG();
+ BUG_ON((reg & 0x3) != 0);
#endif

- iowrite32(bS_to_io(value), hostdata->base + reg);
+ NCR_iowrite32(value, hostdata->base + reg);
}

#endif
===== drivers/scsi/Kconfig 1.88 vs edited =====
--- 1.88/drivers/scsi/Kconfig 2005-04-04 09:55:45 -05:00
+++ edited/drivers/scsi/Kconfig 2005-04-04 15:34:40 -05:00
@@ -951,7 +951,7 @@
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.

-config 53C700_LE_ON_BE
+config 53C700_BE
bool
depends on SCSI_LASI700
default y
===== drivers/scsi/lasi700.c 1.27 vs edited =====
--- 1.27/drivers/scsi/lasi700.c 2005-04-04 09:55:45 -05:00
+++ edited/drivers/scsi/lasi700.c 2005-04-04 15:31:19 -05:00
@@ -117,15 +117,13 @@

if (dev->id.sversion == LASI_700_SVERSION) {
hostdata->clock = LASI700_CLOCK;
- hostdata->force_le_on_be = 1;
+ hostdata->chip_is_be = 0;
} else {
hostdata->clock = LASI710_CLOCK;
- hostdata->force_le_on_be = 0;
+ hostdata->chip_is_be = 1;
hostdata->chip710 = 1;
hostdata->dmode_extra = DMODE_FC2;
}
-
- NCR_700_set_mem_mapped(hostdata);

host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev);
if (!host)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-06 13:31    [from the cache]
©2003-2011 Jasper Spaans