![]() | |||||||||||
Messages in this thread |
jmerkey wrote: > With linux 2.6.9 running at 192 MB/S network loading and protocol > splitting drivers routing packets out of > a 2.6.9 device at full 100 mb/s (12.5 MB/S) simultaneously over 4 ports, > the adaptec starfire driver goes into > constant Tx FIFO reconfiguration mode and after 3-4 days of constantly > resetting the Tx FIFO window and > generating a deluge of messages such as: > > ethX: PCI bus congestion, resetting Tx FIFO window to X bytes > > pouring into the system log file at a rate of a dozen per minute. After > several days, the PCI bus totally locks up > and hangs the system. Need a config option to allow the starfire to > disable this feature. At very > high bus loading rates, the starfire card will completely lock the bus > after 3-4 days > of constant Tx FIFO reconfiguration at very high data rates with > protocol splitting and routing. The feature doesn't need disabling; just modify the driver to stop the flapping. Jeff - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ | ||||||||||
| Last update: 2005-04-06 13:31 [from the cache] ©2003-2008 | |||||||||||