lkml.org 
[lkml]   [2005]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: very strange issue with sata,<4G Ram, and ext3
    Date
    On Thursday 28 April 2005 06:48 pm, Alan Cox wrote:
    > On Iau, 2005-04-28 at 17:16, Rick Warner wrote:
    > > On these systems, we are getting ext2 errors from the initrd during the
    > > untarring. Soon after, we start getting seg faults on random things
    > > (looks like stuff caused by the still running dhcp client), and then a
    > > continuous stream of segfaults on the restore script itself (restore[1]).
    >
    > This sounds almost like the pxe/boot code is still using ram that the
    > kernel has now used (eg the PXE layer or pxe booter forgot to close the
    > client and
    > its still DMAing happily into the kernel)
    This morning, we tried updating to a newer pxelinux (3.07) and had the same
    results. We then tried using etherboot with a mknbi tagged image and also
    had the same results. Since we are getting the same problem on 3 different
    motherboards with 2 different network adapters, I have not looked into
    updating the boot rom on the nics. Should I?

    What should I look into next? I have attached a serial console log of the
    system and errors. The slashes and pipes you see are from a spinning bar
    thing. If you want output that is cleaned up without that, I can provide it.

    --
    Richard Warner
    Lead Systems Integrator
    Microway, Inc
    (508)732-5517
    Bootdata ok (command line is initrd=initrd.img.gz ramdisk_size=46080 rw root=/dev/ram0 devfs=nomount init=/restore console=tty0 console=ttyS0,115200 BOOT_IMAGE=vmlinuz )
    Linux version 2.6.12-rc3-em64t-mcms (root@master.cl.usgs.gov) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #6 Thu Apr 28 10:11:16 EDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
    BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
    BIOS-e820: 000000007ff70000 - 000000007ff78000 (ACPI data)
    BIOS-e820: 000000007ff78000 - 000000007ff80000 (ACPI NVS)
    BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
    Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
    OEM ID: INTEL <6>Product ID: Lindenhurst <6>APIC at: 0xFEE00000
    Processor #0 15:4 APIC version 20
    Processor #6 15:4 APIC version 20
    WARNING: NR_CPUS limit of 1 reached. Processor ignored.
    I/O APIC #2 Version 32 at 0xFEC00000.
    I/O APIC #3 Version 32 at 0xFEC80000.
    I/O APIC #4 Version 32 at 0xFEC80400.
    I/O APIC #5 Version 32 at 0xFEC84000.
    I/O APIC #8 Version 32 at 0xFEC84400.
    Setting APIC routing to flat
    Processors: 1
    Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    Checking aperture...
    Built 1 zonelists
    Kernel command line: initrd=initrd.img.gz ramdisk_size=46080 rw root=/dev/ram0 devfs=nomount init=/restore console=tty0 console=ttyS0,115200 BOOT_IMAGE=vmlinuz
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 131072 bytes)
    time.c: Using 1.193182 MHz PIT timer.
    time.c: Detected 3000.254 MHz processor.
    time.c: Using PIT/TSC based timekeeping.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Placing software IO TLB between 0x3243000 - 0x5243000
    Memory: 2007900k/2096576k available (2932k kernel code, 87916k reserved, 1263k data, 140k init)
    Mount-cache hash table entries: 256
    CPU: Trace cache: 12K uops, L1 D cache: 16K
    CPU: L2 cache: 1024K
    using mwait in idle threads.
    CPU0: Thermal monitoring enabled (TM1)
    CPU: Intel(R) Xeon(TM) CPU 3.00GHz stepping 01
    Using IO APIC NMI watchdog
    Using IO-APIC 2
    Using IO-APIC 3
    Using IO-APIC 4
    Using IO-APIC 5
    Using IO-APIC 8
    activating NMI Watchdog ... done.
    testing NMI watchdog ... OK.
    Using local APIC timer interrupts.
    Detected 12.500 MHz APIC timer.
    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    NET: Registered protocol family 16
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    SCSI subsystem initialized
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:1e.0
    PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
    PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
    PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 16
    PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 16
    PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
    PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
    PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
    PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 16
    PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 23
    PCI->APIC IRQ transform: 0000:00:1f.2[A] -> IRQ 18
    PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17
    PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 54
    PCI->APIC IRQ transform: 0000:03:02.1[B] -> IRQ 55
    PCI->APIC IRQ transform: 0000:08:01.0[A] -> IRQ 17
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
    Total HugeTLB memory allocated, 0
    JFS: nTxBlock = 8192, nTxLock = 65536
    SGI XFS with large block/inode numbers, no debug enabled
    Linux agpgart interface v0.101 (c) Dave Jones
    Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a National Semiconductor PC87306
    RAMDISK driver initialized: 8 RAM disks of 46080K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ata1: SATA max UDMA/133 cmd 0x14E8 ctl 0x14DE bmdma 0x14B0 irq 18
    ata2: SATA max UDMA/133 cmd 0x14E0 ctl 0x14DA bmdma 0x14B8 irq 18
    ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48
    ata1: dev 0 configured for UDMA/133
    scsi0 : ata_piix
    ata2: SATA port has no device.
    scsi1 : ata_piix
    Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
    SCSI device sda: drive cache: write back
    SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
    SCSI device sda: drive cache: write back
    sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
    mice: PS/2 mouse device common for all mice
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 112Kbytes
    TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    RAMDISK: Compressed image found at block 0
    VFS: Mounted root (ext2 filesystem).
    Freeing unused kernel memory: 140k freed
    Turning on debugging options.
    Intel(R) PRO/1000 Network Driver - version 5.7.6-k2
    Copyright (c) 1999-2004 Intel Corporation.
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
    Internet Software Consortium DHCP Client V3.0.1rc13
    Copyright 1995-2002 Internet Software Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/products/DHCP

    e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
    Listening on LPF/eth1/00:30:48:74:a5:71
    Sending on LPF/eth1/00:30:48:74:a5:71
    Listening on LPF/eth0/00:30:48:74:a5:70
    Sending on LPF/eth0/00:30:48:74:a5:70
    Listening on LPF/lo/
    Sending on LPF/lo/
    Sending on Socket/fallback
    DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
    DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 2
    DHCPOFFER from 10.0.0.1
    DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
    DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 3
    DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 4
    DHCPREQUEST on eth0 to 255.255.255.255 port 67
    DHCPDISCOVER on lo to 255.255.255.255 port 67 interval 5
    DHCPACK from 10.0.0.1
    bound to 10.0.0.100 -- renewal in 1455 seconds.
    Brought up network devices.
    Setting date to match master
    Permission denied.
    Fri Apr 29 01:51:44 EDT 2005
    nfs warning: mount version older than kernel
    Checking that noSCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
    -one is using thSCSI device sda: drive cache: write back
    is disk right no sda:w ...
    sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    OK

    Disk /dev/sda: 24792 cylinders, 255 heads, 63 sectors/track
    Old situation:
    Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0

    Device Boot Start End #cyls #blocks Id System
    /dev/sda1 0+ 9 10- 80293+ 83 Linux
    /dev/sda2 0 - 0 0 0 Empty
    /dev/sda3 0 - 0 0 0 Empty
    /dev/sda4 10 24791 24782 199061415 5 Extended
    /dev/sda5 10+ 253 244- 1959898+ 83 Linux
    /dev/sda6 254+ 1470 1217- 9775521 83 Linux
    /dev/sda7 1471+ 1836 366- 2939863+ 83 Linux
    /dev/sda8 1837+ 2202 366- 2939863+ 83 Linux
    /dev/sda9 2203+ 2689 487- 3911796 82 Linux swap
    /dev/sda10 2690+ 24791 22102- 177534283+ 83 Linux
    New situation:
    Units = sectors of 512 bytes, counting from 0

    Device Boot Start End #sectors Id System
    /dev/sda1 63 160649 160587 83 Linux
    /dev/sda2 0 - 0 0 Empty
    /dev/sda3 0 - 0 0 Empty
    /dev/sda4 160650 398283479 398122830 5 Extended
    /dev/sda5 160713 4080509 3919797 83 Linux
    /dev/sda6 4080573 23631614 19551042 83 Linux
    /dev/sda7 23631678 29511404 5879727 83 Linux
    /dev/sda8 29511468 35391194 5879727 83 Linux
    /dev/sda9 35391258 43214849 7823592 82 Linux swap
    /dev/sda10 43214913 398283479 355068567 83 Linux
    Warning: no primary partition is marked bootable (active)
    This does not matter for LILO, but the DOS MBR will not boot this disk.
    Successfully wrote the new partition table

    Re-reading the partition table ...
    SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
    SCSI device sda: drive cache: write back
    sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >

    If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)
    to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1
    (See fdisk(8).)
    grep: /mnt/raidtab: No such file or directory
    Created ext2/3 filesystem on /dev/sda1
    Created ext2/3 filesystem on /dev/sda5
    Created ext2/3 filesystem on /dev/sda6
    Created ext2/3 filesystem on /dev/sda7
    Created ext2/3 filesystem on /dev/sda8
    Created ext2/3 filesystem on /dev/sda10
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda5 at /drive
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda1, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda1 at /drive/boot
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda6 at /drive/usr
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda7, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda7 at /drive/var
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda8, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda8 at /drive/tmp
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda10, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Mounted /dev/sda10 at /drive/home
    Adding 3911788k swap on /dev/sda9. Priority:-1 extents:1
    Swapspace /dev/sda9 initialized and added
    Restoring drive....
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ |EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=24576, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=28672, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=32768, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=36864, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=40960, inode=0, rec_len=0, name_len=0
    / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=12288, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=16384, inode=0, rec_len=0, name_len=0
    uname[1129]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffefe920 error 4
    sed[1133]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffb99d90 error 4
    sed[1136]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffcbdf90 error 4
    \ | / - \ | / - \ |uname[1150]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffac5a40 error 4
    /sed[1155]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffb24b70 error 4
    sed[1158]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffa44d50 error 4
    - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | /EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=12288, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=16384, inode=0, rec_len=0, name_len=0
    uname[1231]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffff0d1f0 error 4
    sed[1235]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffd9aea0 error 4
    sed[1238]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffbb5710 error 4
    -uname[1242]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffcc1300 error 4
    sed[1246]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffffe9910 error 4
    sed[1249]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffef7ce0 error 4
    \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=20480, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=24576, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=28672, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=32768, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=36864, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=40960, inode=0, rec_len=0, name_len=0
    uname[1307]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffbce170 error 4
    sed[1311]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffff96b900 error 4
    sed[1314]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffff9557d0 error 4
    | / - \ | / - \ | / - \uname[1330]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffbb4930 error 4
    sed[1334]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffff9200d0 error 4
    sed[1337]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffff780f0 error 4
    | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -uname[1395]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffa83250 error 4
    sed[1399]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffffa8380 error 4
    sed[1402]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffbc0690 error 4
    \ | / - \ | / - \ |uname[1419]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffff07bf0 error 4
    sed[1423]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffff82cb00 error 4
    sed[1426]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffa072b0 error 4
    / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=12288, inode=0, rec_len=0, name_len=0
    EXT2-fs error (device ram0): ext2_check_page: bad entry in directory #3345: rec_len is smaller than minimal - offset=16384, inode=0, rec_len=0, name_len=0
    uname[1482]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffc3af00 error 4
    \sed[1487]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffd3c3c0 error 4
    sed[1490]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffbe9b10 error 4
    | / - \ | / - \ | / - \uname[1505]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffeda150 error 4
    sed[1509]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007ffffff6b310 error 4
    sed[1512]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffff9bed80 error 4
    |
    mkdir[1514]: segfault at 0000000000000008 rip 00002aaaaaab1dff rsp 00007fffff815d60 error 4
    /restore: line 1mkdir[1515]: segfault at 0000000000000008 rip 00002aaaaaab1dff rsp 00007fffff994c70 error 4
    72: 1514 Segmenchmod[1516]: segfault at 0000000000000008 rip 00002aaaaaab3ce7 rsp 00007fffffa8f3b0 error 4
    tation fault restore[1517]: segfault at 0000000000000004 rip 00000000004322a2 rsp 00007fffffca6e58 error 6
    mkdir /drive/drive
    File Restoration complete.Kernel panic - not syncing: Attempted to kill init!

    Ensuring /medi a/floppy and /media/cdrom have been created
    /restore: line 177: 1515 Segmentation fault mkdir -p /drive/media/floppy /drive/media/cdrom /drive/media/dvd
    Ensuring correct permissions on tmp
    /restore: line 180: 1516 Segmentation fault chmod 1777 /drive/tmp
    /restore: line 190: 1517 Segmentation fault chroot /drive $GRUB --batch --no-floppy >&/dev/null <<EOF
    device (hd0) ${device_save[0]}
    root (hd0,0)
    setup (hd0)
    EOF

    Unable to run grub on /dev/sda
    /restore: line 195: 1518 Segmentation fault bash
    \
     
     \ /
      Last update: 2005-04-29 16:59    [W:0.050 / U:178.368 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site