lkml.org 
[lkml]   [2005]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] Updated: Dynamic Tick version 050408-1 - C-state measures
Hi,

On Tue, Apr 19, 2005 at 04:56:56PM +0200, Thomas Renninger wrote:
> If CONFIG_IDLE_HZ is set, the c-state will be evaluated on
> three control values (averages of the last 4 measures):
>
> a) idle_ms -> if machine was active for longer than this
> value (avg), the machine is assumed to not be idle
> and C1 will be triggered.
>
> b) bm_promote_ms -> if the avg bus master activity is below
> this threshold, C2 is invoked.
>
> c) sleep_avg (no module param) -> the average sleep time of the
> last four C2 (or higher) invokations.
> If a and b does not apply, a C-state will be searched that has
> the highest latency, but still has a latency below the latest
> C2 (or higher) sleeping time and average sleeping time value.

I think that we don't need this complication:

> +//#define DEBUG 1
> +#ifdef DEBUG
> +#define myPrintk(string, args...) printk(KERN_INFO ""string, ##args);
> +#else
> +#define myPrintk(string, args...) {};
> +#endif

Please don't do that... dprintk() is much more common. Also, then don't
comment dprintk() out below in the patch...

> if (pr->flags.bm_check) {
> - u32 bm_status = 0;
> - unsigned long diff = jiffies - pr->power.bm_check_timestamp;
> -
> - if (diff > 32)
> - diff = 32;
> -
> - while (diff) {
> - /* if we didn't get called, assume there was busmaster activity */
> - diff--;
> - if (diff)
> - pr->power.bm_activity |= 0x1;
> - pr->power.bm_activity <<= 1;
> - }

"All" we need to do is to update the "diff". Without dynamic ticks, if the
idle loop didn't get called each jiffy, it was a big hint that there was so
much activity in between, and if there is activity, there is most likely
also bus master activity, or at least more work to do, so interrupt activity
is likely. Therefore we assume there was bm_activity even if there was none.

Now, we do know the jiffy value when we started sleeping. If we use
ticks_elapsed(t1, t2), convert it to jiffies, and do
diff = jiffies - (pr->power.bm_check_timestamp + last_sleep_jiffies);
it should work. I wrote a quick patch to do that, but it locked up my
notebook, so it is most likely broken; hopefully I'll find some time to debug
it, if somebody does it earlier, that'd be great, though.

Thanks,
Dominik


Only assume busmaster activity on non-idle ticks if we didn't sleep until
that jiffy. Needed for dyn-idle.

Signed-off-by: Dominik Brodowski <linux@brodo.de>

--- linux/drivers/acpi/processor_idle.c.original 2005-04-10 20:04:12.000000000 +0200
+++ linux/drivers/acpi/processor_idle.c 2005-04-10 20:14:33.000000000 +0200
@@ -120,6 +120,14 @@
return ((0xFFFFFFFF - t1) + t2);
}

+static inline u32
+ticks_to_jiffies (u32 pm_ticks)
+{
+ pm_ticks *= 286;
+ pm_ticks = (pm_ticks >> 10);
+ return (pm_ticks / (USEC_PER_SEC / HZ));
+}
+

static void
acpi_processor_power_activate (
@@ -169,7 +177,7 @@
struct acpi_processor_cx *cx = NULL;
struct acpi_processor_cx *next_state = NULL;
int sleep_ticks = 0;
- u32 t1, t2 = 0;
+ u32 t1, t2, td = 0;

pr = processors[_smp_processor_id()];
if (!pr)
@@ -201,11 +209,13 @@
* for demotion.
*/
if (pr->flags.bm_check) {
- u32 bm_status = 0;
- unsigned long diff = jiffies - pr->power.bm_check_timestamp;
+ u32 bm_status = 0;
+ long diff = jiffies - pr->power.bm_check_timestamp;

if (diff > 32)
diff = 32;
+ else if (diff < 0)
+ diff = 0;

while (diff) {
/* if we didn't get called, assume there was busmaster activity */
@@ -293,7 +303,9 @@
/* Re-enable interrupts */
local_irq_enable();
/* Compute time (ticks) that we were actually asleep */
- sleep_ticks = ticks_elapsed(t1, t2) - cx->latency_ticks - C2_OVERHEAD;
+ td = ticks_elapsed(t1, t2);
+ sleep_ticks = td - cx->latency_ticks - C2_OVERHEAD;
+ pr->power.bm_check_timestamp += ticks_to_jiffies(td);
break;

case ACPI_STATE_C3:
@@ -312,7 +324,9 @@
/* Re-enable interrupts */
local_irq_enable();
/* Compute time (ticks) that we were actually asleep */
- sleep_ticks = ticks_elapsed(t1, t2) - cx->latency_ticks - C3_OVERHEAD;
+ td = ticks_elapsed(t1, t2);
+ sleep_ticks = td - cx->latency_ticks - C3_OVERHEAD;
+ pr->power.bm_check_timestamp += ticks_to_jiffies(td);
break;

default:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-04-19 17:31    [W:0.109 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site