[lkml]   [2005]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectDVD writer and IDE support...


I've just gotten myself a new DVD burner which triggers some
interesting events in the kernel. From the log:

hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x40 { LastFailedSense=0x04 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Hardware error -- (Sense key=0x04)
Focus servo failure -- (asc=0x09, ascq=0x02)
The failed "Read Cd/Dvd Capacity" packet command was:
"25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "

rmmod'ing the icd-cd module and modprob'ing the ide-scsi (seeing as
that used to be the common approach for folks (I'm new to burners...))
I got this in the log:

ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: AOPEN Model: DUW1608/ARR Rev: A060
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0

How should I interprete this? That the device is not supported under
the icd-cd module but the scsi support detects and supports it ok?
I've not tried to burn anything with it yet so I have no hard facts on
if there is enough support (yet).

If there is any sort of data which need to be shipped somewhere to
make this device supported by ide-cd, I'd be glad to help...

Advice appreciated,


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-04-13 20:19    [W:0.044 / U:2.772 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site