lkml.org 
[lkml]   [2005]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] PCI: create PCI_DEBUG config option to make it easier for users to enable pci debugging
Date
From
ChangeSet 1.2181.16.26, 2005/03/28 22:29:40-08:00, gregkh@suse.de

[PATCH] PCI: create PCI_DEBUG config option to make it easier for users to enable pci debugging

Now you don't have to dig through a file to change a #define, it's a real config option.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


drivers/pci/Kconfig | 10 ++++++++++
drivers/pci/Makefile | 4 ++++
drivers/pci/hotplug.c | 15 ++++-----------
drivers/pci/pci.c | 12 +++---------
drivers/pci/probe.c | 25 +++++++++----------------
drivers/pci/quirks.c | 2 --
drivers/pci/remove.c | 8 --------
drivers/pci/setup-irq.c | 10 +---------
drivers/pci/setup-res.c | 16 ++++------------
9 files changed, 35 insertions(+), 67 deletions(-)


diff -Nru a/drivers/pci/Kconfig b/drivers/pci/Kconfig
--- a/drivers/pci/Kconfig 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/Kconfig 2005-04-01 15:30:40 -08:00
@@ -47,3 +47,13 @@

When in doubt, say Y.

+config PCI_DEBUG
+ bool "PCI Debugging"
+ depends on PCI && DEBUG_KERNEL
+ help
+ Say Y here if you want the PCI core to produce a bunch of debug
+ messages to the system log. Select this if you are having a
+ problem with PCI support and want to see more of what is going on.
+
+ When in doubt, say N.
+
diff -Nru a/drivers/pci/Makefile b/drivers/pci/Makefile
--- a/drivers/pci/Makefile 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/Makefile 2005-04-01 15:30:40 -08:00
@@ -41,6 +41,10 @@
obj-y += syscall.o
endif

+ifeq ($(CONFIG_PCI_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
hostprogs-y := gen-devlist

# Dependencies on generated files need to be listed explicitly
diff -Nru a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c
--- a/drivers/pci/hotplug.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/hotplug.c 2005-04-01 15:30:40 -08:00
@@ -1,15 +1,8 @@
+#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/module.h>
#include "pci.h"

-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
int pci_hotplug (struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
{
@@ -71,7 +64,7 @@
struct pci_dev_wrapped wrapped_dev;
int result = 0;

- DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
+ pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus),
wrapped_bus->bus->number);

if (fn->pre_visit_pci_bus) {
@@ -107,7 +100,7 @@
struct pci_bus_wrapped wrapped_bus;
int result = 0;

- DBG("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));
+ pr_debug("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev));

if (fn->visit_pci_dev) {
result = fn->visit_pci_dev(wrapped_dev, wrapped_parent);
@@ -153,7 +146,7 @@
return result;
break;
default:
- DBG("PCI: Scanning device %s\n", pci_name(dev));
+ pr_debug("PCI: Scanning device %s\n", pci_name(dev));
if (fn->visit_pci_dev) {
result = fn->visit_pci_dev (wrapped_dev,
wrapped_parent);
diff -Nru a/drivers/pci/pci.c b/drivers/pci/pci.c
--- a/drivers/pci/pci.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/pci.c 2005-04-01 15:30:40 -08:00
@@ -9,6 +9,7 @@
* Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
*/

+#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
@@ -16,13 +17,6 @@
#include <linux/spinlock.h>
#include <asm/dma.h> /* isa_dma_bridge_buggy */

-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif

/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
@@ -633,7 +627,7 @@

pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_MASTER)) {
- DBG("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
+ pr_debug("PCI: Enabling bus mastering for device %s\n", pci_name(dev));
cmd |= PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -711,7 +705,7 @@

pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- DBG("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
+ pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/probe.c 2005-04-01 15:30:40 -08:00
@@ -2,6 +2,7 @@
* probe.c - PCI detection and setup code
*/

+#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
@@ -9,14 +10,6 @@
#include <linux/module.h>
#include <linux/cpumask.h>

-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
#define CARDBUS_RESERVE_BUSNR 3
#define PCI_CFG_SPACE_SIZE 256
@@ -422,8 +415,8 @@

pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);

- DBG("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
- pci_name(dev), buses & 0xffffff, pass);
+ pr_debug("PCI: Scanning behind PCI bridge %s, config %06x, pass %d\n",
+ pci_name(dev), buses & 0xffffff, pass);

/* Disable MasterAbortMode during probing to avoid reporting
of bus errors (in some architectures) */
@@ -559,8 +552,8 @@
dev->class = class;
class >>= 8;

- DBG("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
- dev->vendor, dev->device, class, dev->hdr_type);
+ pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev),
+ dev->vendor, dev->device, class, dev->hdr_type);

/* "Unknown power state" */
dev->current_state = 4;
@@ -815,7 +808,7 @@
unsigned int devfn, pass, max = bus->secondary;
struct pci_dev *dev;

- DBG("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
+ pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(bus), bus->number);

/* Go find them, Rover! */
for (devfn = 0; devfn < 0x100; devfn += 8)
@@ -825,7 +818,7 @@
* After performing arch-dependent fixup of the bus, look behind
* all PCI-to-PCI bridges on this bus.
*/
- DBG("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
+ pr_debug("PCI: Fixups for bus %04x:%02x\n", pci_domain_nr(bus), bus->number);
pcibios_fixup_bus(bus);
for (pass=0; pass < 2; pass++)
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -841,7 +834,7 @@
*
* Return how far we've got finding sub-buses.
*/
- DBG("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
+ pr_debug("PCI: Bus scan for %04x:%02x returning with max=%02x\n",
pci_domain_nr(bus), bus->number, max);
return max;
}
@@ -881,7 +874,7 @@

if (pci_find_bus(pci_domain_nr(b), bus)) {
/* If we already got to this bus through a different bridge, ignore it */
- DBG("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
+ pr_debug("PCI: Bus %04x:%02x already known\n", pci_domain_nr(b), bus);
goto err_out;
}
list_add_tail(&b->node, &pci_root_buses);
diff -Nru a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/quirks.c 2005-04-01 15:30:40 -08:00
@@ -19,8 +19,6 @@
#include <linux/init.h>
#include <linux/delay.h>

-#undef DEBUG
-
/* Deal with broken BIOS'es that neglect to enable passive release,
which can cause problems in combination with the 82441FX/PPro MTRRs */
static void __devinit quirk_passive_release(struct pci_dev *dev)
diff -Nru a/drivers/pci/remove.c b/drivers/pci/remove.c
--- a/drivers/pci/remove.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/remove.c 2005-04-01 15:30:40 -08:00
@@ -2,14 +2,6 @@
#include <linux/module.h>
#include "pci.h"

-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
static void pci_free_resources(struct pci_dev *dev)
{
int i;
diff -Nru a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
--- a/drivers/pci/setup-irq.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/setup-irq.c 2005-04-01 15:30:40 -08:00
@@ -18,14 +18,6 @@
#include <linux/cache.h>


-#define DEBUG_CONFIG 0
-#if DEBUG_CONFIG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-
static void __init
pdev_fixup_irq(struct pci_dev *dev,
u8 (*swizzle)(struct pci_dev *, u8 *),
@@ -53,7 +45,7 @@
irq = 0;
dev->irq = irq;

- DBG(KERN_ERR "PCI: fixup irq: (%s) got %d\n",
+ pr_debug("PCI: fixup irq: (%s) got %d\n",
dev->dev.kobj.name, dev->irq);

/* Always tell the device, so the driver knows what is
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c 2005-04-01 15:30:40 -08:00
+++ b/drivers/pci/setup-res.c 2005-04-01 15:30:40 -08:00
@@ -25,13 +25,6 @@
#include <linux/slab.h>
#include "pci.h"

-#define DEBUG_CONFIG 0
-#if DEBUG_CONFIG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-

static void
pci_update_resource(struct pci_dev *dev, struct resource *res, int resno)
@@ -42,10 +35,9 @@

pcibios_resource_to_bus(dev, &region, res);

- DBG(KERN_ERR " got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
- "BAR %d of %s\n", res->start, res->end,
- region.start, region.end, res->flags,
- resno, pci_name(dev));
+ pr_debug(" got res [%lx:%lx] bus [%lx:%lx] flags %lx for "
+ "BAR %d of %s\n", res->start, res->end,
+ region.start, region.end, res->flags, resno, pci_name(dev));

new = region.start | (res->flags & PCI_REGION_FLAG_MASK);
if (res->flags & IORESOURCE_IO)
@@ -85,7 +77,7 @@
}
}
res->flags &= ~IORESOURCE_UNSET;
- DBG(KERN_INFO "PCI: moved device %s resource %d (%lx) to %x\n",
+ pr_debug("PCI: moved device %s resource %d (%lx) to %x\n",
pci_name(dev), resno, res->flags,
new & ~PCI_REGION_FLAG_MASK);
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-06 13:31    [W:0.055 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site