Messages in this thread | | | Date | Tue, 8 Mar 2005 09:38:04 +1100 | From | Dave Airlie <> | Subject | Re: PROBLEM: Radeon card displays incorrectly under the 2.6.11 version unless compiled with SMP support |
| |
On Sun, 6 Mar 2005 09:49:32 -0800 (PST), Lobiuc Andrei <alobiuc@yahoo.com> wrote: > 1.Radeon card displays incorrectly under the 2.6.11 > version unless compiled with SMP support. > 2.After compiling and installing the 2.6.11 kernel > version, my ASUS Radeon 9200SE 128 MB graphic card > does not display correctly in plain VGA mode. The same > card has no problem with the 2.6.10 kernel. > Regarding radeonfb, dmesg reports: > "radeonfb_pci_register BEGIN > ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, > low) -> IRQ 169 > radeonfb (0000:01:00.0): Found 131072k of DDR 64 bits > wide videoram > radeonfb (0000:01:00.0): mapped 16384k videoram > radeonfb: Found Intel x86 BIOS ROM Image > radeonfb: Retreived PLL infos from BIOS > radeonfb: Reference=27.00 MHz (RefDiv=12) > Memory=200.00 Mhz, System=166.00 MHz > radeonfb: PLL min 20000 max 40000 > 1 chips in connector info > - chip 1 has 1 connectors > * connector 0 of type 2 (CRT) : 2300 > Starting monitor auto detection... > radeonfb: I2C (port 1) ... not found > radeonfb: I2C (port 2) ... not found > radeonfb: I2C (port 3) ... found CRT display > radeonfb: I2C (port 4) ... not found > radeonfb: I2C (port 2) ... not found > radeonfb: I2C (port 4) ... not found > radeonfb: I2C (port 3) ... found CRT display > radeonfb: Monitor 1 type CRT found > radeonfb: EDID probed > radeonfb: Monitor 2 type no found > hStart = 737, hEnd = 808, hTotal = 896 > vStart = 401, vEnd = 404, vTotal = 417 > h_total_disp = 0x59006f hsync_strt_wid = 0x8802eb > v_total_disp = 0x18f01a0 vsync_strt_wid = > 0x830190 > pixclock = 38210 > freq = 2617 > freq = 2617, PLL min = 20000, PLL max = 40000 > ref_div = 12, ref_clk = 2700, output_freq = 20936 > ref_div = 12, ref_clk = 2700, output_freq = 20936 > post div = 0x3 > fb_div = 0x5d > ppll_div_3 = 0x3005d > Console: switching to colour frame buffer device 90x25 > radeonfb (0000:01:00.0): ATI Radeon Yd > radeonfb_pci_register END > kobject_register failed for radeonfb (-17) > [<c01cf0c7>] kobject_register+0x57/0x60 > [<c0262707>] bus_add_driver+0x57/0xd0 > [<c0262d5f>] driver_register+0x2f/0x40 > [<c01db547>] pci_create_newid_file+0x27/0x30 > [<c01dba42>] pci_register_driver+0x62/0x80 > [<c05b3b40>] radeonfb_old_init+0x40/0x50 > [<c059c7fb>] do_initcalls+0x2b/0xc0 > [<c01002c0>] init+0x0/0x110 > [<c01002c0>] init+0x0/0x110 > [<c01002ef>] init+0x2f/0x110 > [<c010086c>] kernel_thread_helper+0x0/0x14 > [<c0100871>] kernel_thread_helper+0x5/0x14 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Linux agpgart interface v0.100 (c) Dave Jones > [drm] Initialized drm 1.0.0 20040925 > ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, > low) -> IRQ 169 > [drm] Initialized radeon 1.14.0 20050125 on minor 0: > ATI Technologies Inc RV280[Radeon 9200 SE]" >
It looks like you have no agpgart chipset driver loaded or if DRM is in the kernel, the agpgart chipset driver should be to...
Dave. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |