lkml.org 
[lkml]   [2005]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC][PATCH 6/7] i386 code for the activemem map
Regards, Hari

---

This patch contains the i386 specific code to generate the
/proc/activemem view.
---

Signed-off-by: Hariprasad Nellitheertha <hari@in.ibm.com>
---

linux-2.6.12-rc1-hari/arch/i386/kernel/efi.c | 31 +++++++++++++++
linux-2.6.12-rc1-hari/arch/i386/kernel/setup.c | 50 +++++++++++++++++++++++++
linux-2.6.12-rc1-hari/include/linux/efi.h | 2 +
linux-2.6.12-rc1-hari/include/linux/ioport.h | 1
4 files changed, 84 insertions(+)

diff -puN arch/i386/kernel/efi.c~activemem-i386 arch/i386/kernel/efi.c
--- linux-2.6.12-rc1/arch/i386/kernel/efi.c~activemem-i386 2005-03-23 17:48:22.000000000 +0530
+++ linux-2.6.12-rc1-hari/arch/i386/kernel/efi.c 2005-03-23 17:48:22.000000000 +0530
@@ -630,6 +630,37 @@ void __init efi_initialize_physmem_resou
}
}

+void __init efi_initialize_activemem_resources(struct resource *code_resource,
+ struct resource *data_resource)
+{
+ struct resource *res, *code_resource_copy, *data_resource_copy;
+ efi_memory_desc_t *md;
+ int i;
+#ifdef CONFIG_KEXEC
+ struct resource *crashk_res_copy;
+
+ crashk_res_copy = alloc_bootmem_low(sizeof(struct resource));
+ memcpy(crashk_res_copy, &crashk_res, sizeof(struct resource));
+#endif
+
+ code_resource_copy = alloc_bootmem_low(2*sizeof(struct resource));
+ data_resource_copy = code_resource_copy + sizeof(struct resource);
+ memcpy(code_resource_copy, code_resource, sizeof(struct resource));
+ memcpy(data_resource_copy, data_resource, sizeof(struct resource));
+
+ for (i = 0; i < memmap.nr_map; i++) {
+ md = &memmap.map[i];
+ res = alloc_efi_resource(md, &activemem_resource, i);
+ if (md->type == EFI_CONVENTIONAL_MEMORY) {
+ request_resource(res, code_resource_copy);
+ request_resource(res, data_resource_copy);
+#ifdef CONFIG_KEXEC
+ request_resource(res, crashk_res_copy);
+#endif
+ }
+ }
+}
+
/*
* Make a copy of memmap for creating the physmem resources later.
*/
diff -puN arch/i386/kernel/setup.c~activemem-i386 arch/i386/kernel/setup.c
--- linux-2.6.12-rc1/arch/i386/kernel/setup.c~activemem-i386 2005-03-23 17:48:22.000000000 +0530
+++ linux-2.6.12-rc1-hari/arch/i386/kernel/setup.c 2005-03-23 17:48:22.000000000 +0530
@@ -1303,6 +1303,39 @@ static void __init legacy_init_physmem_r
}

/*
+ * Request address space for standard ROM and RAM resources. In i386, this is
+ * similar to the entries in iomem_resources. But we still do this so we have
+ * consistent views across architectures.
+ */
+static void __init legacy_init_activemem_resources(void)
+{
+ int i;
+ struct resource *res, *code_resource_copy, *data_resource_copy;
+#ifdef CONFIG_KEXEC
+ struct resource *crashk_res_copy;
+
+ crashk_res_copy = alloc_bootmem_low(sizeof(struct resource));
+ memcpy(crashk_res_copy, &crashk_res, sizeof(struct resource));
+#endif
+
+ code_resource_copy = alloc_bootmem_low(2*sizeof(struct resource));
+ data_resource_copy = code_resource_copy + sizeof(struct resource);
+ memcpy(code_resource_copy, &code_resource, sizeof(struct resource));
+ memcpy(data_resource_copy, &data_resource, sizeof(struct resource));
+
+ for (i = 0; i < e820.nr_map; i++) {
+ res = alloc_e820_resource(&e820, &activemem_resource, i);
+ if (e820.map[i].type == E820_RAM) {
+ request_resource(res, code_resource_copy);
+ request_resource(res, data_resource_copy);
+#ifdef CONFIG_KEXEC
+ request_resource(res, crashk_res_copy);
+#endif
+ }
+ }
+}
+
+/*
* Request address space for all standard resources
*/
static void __init register_memory(void)
@@ -1491,6 +1524,21 @@ static void __init register_physmem_reso
legacy_init_physmem_resources();
}

+/*
+ * This is similar to the entries in iomem. But we create this
+ * to ensure consistency across archs. activemem contains a list
+ * RAM resources that are used by the current kernel. Is different
+ * from physmem when the kernel is booted with mem= or memmap=
+ * options.
+ */
+static void __init register_activemem_resources(void)
+{
+ if (efi_enabled)
+ efi_initialize_activemem_resources(&code_resource, &data_resource);
+ else
+ legacy_init_activemem_resources();
+}
+

/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
@@ -1590,6 +1638,8 @@ void __init setup_arch(char **cmdline_p)

register_physmem_resources();

+ register_activemem_resources();
+
#ifdef CONFIG_EARLY_PRINTK
{
char *s = strstr(*cmdline_p, "earlyprintk=");
diff -puN include/linux/efi.h~activemem-i386 include/linux/efi.h
--- linux-2.6.12-rc1/include/linux/efi.h~activemem-i386 2005-03-23 17:48:22.000000000 +0530
+++ linux-2.6.12-rc1-hari/include/linux/efi.h 2005-03-23 17:48:22.000000000 +0530
@@ -302,6 +302,8 @@ extern int __init efi_uart_console_only
extern void efi_initialize_iomem_resources(struct resource *code_resource,
struct resource *data_resource);
extern void efi_initialize_physmem_resources(void);
+extern void efi_initialize_activemem_resources(struct resource *code_resource,
+ struct resource *data_resource);
extern void preserve_memmap(void);
extern unsigned long __init efi_get_time(void);
extern int __init efi_set_rtc_mmss(unsigned long nowtime);
diff -puN include/linux/ioport.h~activemem-i386 include/linux/ioport.h
--- linux-2.6.12-rc1/include/linux/ioport.h~activemem-i386 2005-03-23 17:48:22.000000000 +0530
+++ linux-2.6.12-rc1-hari/include/linux/ioport.h 2005-03-23 17:48:22.000000000 +0530
@@ -92,6 +92,7 @@ struct resource_list {
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern struct resource physmem_resource;
+extern struct resource activemem_resource;

extern int request_resource(struct resource *root, struct resource *new);
extern struct resource * ____request_resource(struct resource *root, struct resource *new);
_
\
 
 \ /
  Last update: 2005-04-06 13:30    [W:0.106 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site