Messages in this thread | | | Date | Tue, 22 Mar 2005 18:25:44 +0100 | From | Sylvain Meyer <> | Subject | Re: [Linux-fbdev-devel] intelfb crash on i845 |
| |
Hi Brice,
I hoped i fixed the bug but definately not. The problem comes from a ressource allocation collision between the intelfb driver and the XFree i830 driver. As a workaround you should disable HW acceleration on intelfb (option accel=0). I think the problem occurs because XFree doesn't restore register state when switching to VT. But i have to investigate more deeply.
Sylvain
Brice Goglin a écrit:
> Hi, > > Following our recent discussion about my DRM/i830 problems > with XFree on my Dell Optiplex GX260 (see > http://marc.theaimsgroup.com/?l=linux-kernel&m=111020328808689&w=2), > here comes the intelfb part of my bug report. > > Booting with intelfb works great: As long as I don't start the > X server, I can work and switch between the framebuffer text consoles. > > If I start the X server (XFree 4.3.0 from Debian testing before, > Xorg 6.8.2 now), I can't switch back to fb text consoles: > First time I chvt [123456], it switches to a **non-FB** text console > for about 1 second, and then to a black screen (sometimes, a colored > column appear when I try to type something on my keyboard). > > During this 1 second, there are some messages written wherever in > the text console. They look like the begining of dmesg. > They are mis-aligned, probably because the resolution of the text > console is different from the FB text console. > > Switching back to the X server works. > Switching back to a FB text console leads to a dirty screen > with white and black columns on the left, and everything black > on the right. > > dmesg show this when switching from X to a FB text console > for the first time: > intelfb: ring buffer : space: 8488 wanted 65472 > intelfb: lockup - turning off hardware acceleration > > Note that disabling DRI in Xorg doesn't change anything. > > dmesg, lspci et config are attached. > > This is with 2.6.11. But I don't remember having seen intelfb > works since it was introduced in vanilla. > 2.6.12-rc1 and 2.6.12-rc1-mm1 don't change anything, except > maybe the dirtiness of the FB screen. > > Regards > Brice Goglin > >------------------------------------------------------------------------ > ># ># Automatically generated make config: don't edit ># Linux kernel version: 2.6.11 ># Tue Mar 8 10:19:50 2005 ># >CONFIG_X86=y >CONFIG_MMU=y >CONFIG_UID16=y >CONFIG_GENERIC_ISA_DMA=y >CONFIG_GENERIC_IOMAP=y > ># ># Code maturity level options ># >CONFIG_EXPERIMENTAL=y ># CONFIG_CLEAN_COMPILE is not set >CONFIG_BROKEN=y >CONFIG_BROKEN_ON_SMP=y >CONFIG_LOCK_KERNEL=y > ># ># General setup ># >CONFIG_LOCALVERSION="=Macvin" >CONFIG_SWAP=y >CONFIG_SYSVIPC=y ># CONFIG_POSIX_MQUEUE is not set >CONFIG_BSD_PROCESS_ACCT=y ># CONFIG_BSD_PROCESS_ACCT_V3 is not set >CONFIG_SYSCTL=y ># CONFIG_AUDIT is not set >CONFIG_LOG_BUF_SHIFT=17 >CONFIG_HOTPLUG=y >CONFIG_KOBJECT_UEVENT=y >CONFIG_IKCONFIG=y >CONFIG_IKCONFIG_PROC=y ># CONFIG_EMBEDDED is not set >CONFIG_KALLSYMS=y >CONFIG_KALLSYMS_ALL=y ># CONFIG_KALLSYMS_EXTRA_PASS is not set >CONFIG_FUTEX=y >CONFIG_EPOLL=y ># CONFIG_CC_OPTIMIZE_FOR_SIZE is not set >CONFIG_SHMEM=y >CONFIG_CC_ALIGN_FUNCTIONS=0 >CONFIG_CC_ALIGN_LABELS=0 >CONFIG_CC_ALIGN_LOOPS=0 >CONFIG_CC_ALIGN_JUMPS=0 ># CONFIG_TINY_SHMEM is not set > ># ># Loadable module support ># >CONFIG_MODULES=y >CONFIG_MODULE_UNLOAD=y ># CONFIG_MODULE_FORCE_UNLOAD is not set >CONFIG_OBSOLETE_MODPARM=y ># CONFIG_MODVERSIONS is not set ># CONFIG_MODULE_SRCVERSION_ALL is not set >CONFIG_KMOD=y > ># ># Processor type and features ># >CONFIG_X86_PC=y ># CONFIG_X86_ELAN is not set ># CONFIG_X86_VOYAGER is not set ># CONFIG_X86_NUMAQ is not set ># CONFIG_X86_SUMMIT is not set ># CONFIG_X86_BIGSMP is not set ># CONFIG_X86_VISWS is not set ># CONFIG_X86_GENERICARCH is not set ># CONFIG_X86_ES7000 is not set ># CONFIG_M386 is not set ># CONFIG_M486 is not set ># CONFIG_M586 is not set ># CONFIG_M586TSC is not set ># CONFIG_M586MMX is not set ># CONFIG_M686 is not set ># CONFIG_MPENTIUMII is not set ># CONFIG_MPENTIUMIII is not set ># CONFIG_MPENTIUMM is not set >CONFIG_MPENTIUM4=y ># CONFIG_MK6 is not set ># CONFIG_MK7 is not set ># CONFIG_MK8 is not set ># CONFIG_MCRUSOE is not set ># CONFIG_MEFFICEON is not set ># CONFIG_MWINCHIPC6 is not set ># CONFIG_MWINCHIP2 is not set ># CONFIG_MWINCHIP3D is not set ># CONFIG_MCYRIXIII is not set ># CONFIG_MVIAC3_2 is not set ># CONFIG_X86_GENERIC is not set >CONFIG_X86_CMPXCHG=y >CONFIG_X86_XADD=y >CONFIG_X86_L1_CACHE_SHIFT=7 >CONFIG_RWSEM_XCHGADD_ALGORITHM=y >CONFIG_GENERIC_CALIBRATE_DELAY=y >CONFIG_X86_WP_WORKS_OK=y >CONFIG_X86_INVLPG=y >CONFIG_X86_BSWAP=y >CONFIG_X86_POPAD_OK=y >CONFIG_X86_GOOD_APIC=y >CONFIG_X86_INTEL_USERCOPY=y >CONFIG_X86_USE_PPRO_CHECKSUM=y ># CONFIG_HPET_TIMER is not set ># CONFIG_SMP is not set >CONFIG_PREEMPT=y >CONFIG_PREEMPT_BKL=y ># CONFIG_X86_UP_APIC is not set >CONFIG_X86_TSC=y >CONFIG_X86_MCE=y >CONFIG_X86_MCE_NONFATAL=y ># CONFIG_TOSHIBA is not set ># CONFIG_I8K is not set ># CONFIG_MICROCODE is not set ># CONFIG_X86_MSR is not set ># CONFIG_X86_CPUID is not set > ># ># Firmware Drivers ># >CONFIG_EDD=m >CONFIG_NOHIGHMEM=y ># CONFIG_HIGHMEM4G is not set ># CONFIG_HIGHMEM64G is not set ># CONFIG_MATH_EMULATION is not set >CONFIG_MTRR=y ># CONFIG_EFI is not set >CONFIG_HAVE_DEC_LOCK=y ># CONFIG_REGPARM is not set > ># ># Power management options (ACPI, APM) ># >CONFIG_PM=y ># CONFIG_PM_DEBUG is not set ># CONFIG_SOFTWARE_SUSPEND is not set > ># ># ACPI (Advanced Configuration and Power Interface) Support ># >CONFIG_ACPI=y >CONFIG_ACPI_BOOT=y >CONFIG_ACPI_INTERPRETER=y >CONFIG_ACPI_SLEEP=y >CONFIG_ACPI_SLEEP_PROC_FS=y >CONFIG_ACPI_AC=y ># CONFIG_ACPI_BATTERY is not set >CONFIG_ACPI_BUTTON=y >CONFIG_ACPI_VIDEO=y >CONFIG_ACPI_FAN=y >CONFIG_ACPI_PROCESSOR=y >CONFIG_ACPI_THERMAL=y ># CONFIG_ACPI_ASUS is not set ># CONFIG_ACPI_IBM is not set ># CONFIG_ACPI_TOSHIBA is not set ># CONFIG_ACPI_CUSTOM_DSDT is not set >CONFIG_ACPI_BLACKLIST_YEAR=0 ># CONFIG_ACPI_DEBUG is not set >CONFIG_ACPI_BUS=y >CONFIG_ACPI_EC=y >CONFIG_ACPI_POWER=y >CONFIG_ACPI_PCI=y >CONFIG_ACPI_SYSTEM=y >CONFIG_X86_PM_TIMER=y >CONFIG_ACPI_CONTAINER=m > ># ># APM (Advanced Power Management) BIOS Support ># ># CONFIG_APM is not set > ># ># CPU Frequency scaling ># ># CONFIG_CPU_FREQ is not set > ># ># Bus options (PCI, PCMCIA, EISA, MCA, ISA) ># >CONFIG_PCI=y ># CONFIG_PCI_GOBIOS is not set ># CONFIG_PCI_GOMMCONFIG is not set ># CONFIG_PCI_GODIRECT is not set >CONFIG_PCI_GOANY=y >CONFIG_PCI_BIOS=y >CONFIG_PCI_DIRECT=y >CONFIG_PCI_MMCONFIG=y ># CONFIG_PCIEPORTBUS is not set >CONFIG_PCI_LEGACY_PROC=y >CONFIG_PCI_NAMES=y >CONFIG_ISA=y ># CONFIG_EISA is not set ># CONFIG_MCA is not set ># CONFIG_SCx200 is not set > ># ># PCCARD (PCMCIA/CardBus) support ># ># CONFIG_PCCARD is not set > ># ># PC-card bridges ># >CONFIG_PCMCIA_PROBE=y > ># ># PCI Hotplug Support ># ># CONFIG_HOTPLUG_PCI is not set > ># ># Executable file formats ># >CONFIG_BINFMT_ELF=y >CONFIG_BINFMT_AOUT=y >CONFIG_BINFMT_MISC=y > ># ># Device Drivers ># > ># ># Generic Driver Options ># ># CONFIG_STANDALONE is not set ># CONFIG_PREVENT_FIRMWARE_BUILD is not set ># CONFIG_FW_LOADER is not set ># CONFIG_DEBUG_DRIVER is not set > ># ># Memory Technology Devices (MTD) ># ># CONFIG_MTD is not set > ># ># Parallel port support ># ># CONFIG_PARPORT is not set > ># ># Plug and Play support ># >CONFIG_PNP=y ># CONFIG_PNP_DEBUG is not set > ># ># Protocols ># ># CONFIG_ISAPNP is not set >CONFIG_PNPBIOS=y >CONFIG_PNPBIOS_PROC_FS=y >CONFIG_PNPACPI=y > ># ># Block devices ># >CONFIG_BLK_DEV_FD=m ># CONFIG_BLK_DEV_XD is not set ># CONFIG_BLK_CPQ_DA is not set ># CONFIG_BLK_CPQ_CISS_DA is not set ># CONFIG_BLK_DEV_DAC960 is not set ># CONFIG_BLK_DEV_UMEM is not set ># CONFIG_BLK_DEV_COW_COMMON is not set >CONFIG_BLK_DEV_LOOP=m ># CONFIG_BLK_DEV_CRYPTOLOOP is not set ># CONFIG_BLK_DEV_NBD is not set ># CONFIG_BLK_DEV_SX8 is not set ># CONFIG_BLK_DEV_UB is not set ># CONFIG_BLK_DEV_RAM is not set >CONFIG_BLK_DEV_RAM_COUNT=16 >CONFIG_INITRAMFS_SOURCE="" ># CONFIG_LBD is not set ># CONFIG_CDROM_PKTCDVD is not set > ># ># IO Schedulers ># >CONFIG_IOSCHED_NOOP=y >CONFIG_IOSCHED_AS=y >CONFIG_IOSCHED_DEADLINE=y >CONFIG_IOSCHED_CFQ=y ># CONFIG_ATA_OVER_ETH is not set > ># ># ATA/ATAPI/MFM/RLL support ># >CONFIG_IDE=y >CONFIG_BLK_DEV_IDE=y > ># ># Please see Documentation/ide.txt for help/info on IDE drives ># ># CONFIG_BLK_DEV_IDE_SATA is not set ># CONFIG_BLK_DEV_HD_IDE is not set >CONFIG_BLK_DEV_IDEDISK=y >CONFIG_IDEDISK_MULTI_MODE=y >CONFIG_BLK_DEV_IDECD=y ># CONFIG_BLK_DEV_IDETAPE is not set ># CONFIG_BLK_DEV_IDEFLOPPY is not set ># CONFIG_BLK_DEV_IDESCSI is not set ># CONFIG_IDE_TASK_IOCTL is not set > ># ># IDE chipset support/bugfixes ># >CONFIG_IDE_GENERIC=y >CONFIG_BLK_DEV_CMD640=y ># CONFIG_BLK_DEV_CMD640_ENHANCED is not set ># CONFIG_BLK_DEV_IDEPNP is not set >CONFIG_BLK_DEV_IDEPCI=y >CONFIG_IDEPCI_SHARE_IRQ=y ># CONFIG_BLK_DEV_OFFBOARD is not set >CONFIG_BLK_DEV_GENERIC=y ># CONFIG_BLK_DEV_OPTI621 is not set ># CONFIG_BLK_DEV_RZ1000 is not set >CONFIG_BLK_DEV_IDEDMA_PCI=y ># CONFIG_BLK_DEV_IDEDMA_FORCED is not set >CONFIG_IDEDMA_PCI_AUTO=y ># CONFIG_IDEDMA_ONLYDISK is not set ># CONFIG_BLK_DEV_AEC62XX is not set ># CONFIG_BLK_DEV_ALI15X3 is not set ># CONFIG_BLK_DEV_AMD74XX is not set ># CONFIG_BLK_DEV_ATIIXP is not set ># CONFIG_BLK_DEV_CMD64X is not set ># CONFIG_BLK_DEV_TRIFLEX is not set ># CONFIG_BLK_DEV_CY82C693 is not set ># CONFIG_BLK_DEV_CS5520 is not set ># CONFIG_BLK_DEV_CS5530 is not set ># CONFIG_BLK_DEV_HPT34X is not set ># CONFIG_BLK_DEV_HPT366 is not set ># CONFIG_BLK_DEV_SC1200 is not set >CONFIG_BLK_DEV_PIIX=y ># CONFIG_BLK_DEV_NS87415 is not set ># CONFIG_BLK_DEV_PDC202XX_OLD is not set ># CONFIG_BLK_DEV_PDC202XX_NEW is not set ># CONFIG_BLK_DEV_SVWKS is not set ># CONFIG_BLK_DEV_SIIMAGE is not set ># CONFIG_BLK_DEV_SIS5513 is not set ># CONFIG_BLK_DEV_SLC90E66 is not set ># CONFIG_BLK_DEV_TRM290 is not set ># CONFIG_BLK_DEV_VIA82CXXX is not set ># CONFIG_IDE_ARM is not set ># CONFIG_IDE_CHIPSETS is not set >CONFIG_BLK_DEV_IDEDMA=y ># CONFIG_IDEDMA_IVB is not set >CONFIG_IDEDMA_AUTO=y ># CONFIG_BLK_DEV_HD is not set > ># ># SCSI device support ># >CONFIG_SCSI=y >CONFIG_SCSI_PROC_FS=y > ># ># SCSI support type (disk, tape, CD-ROM) ># >CONFIG_BLK_DEV_SD=m ># CONFIG_CHR_DEV_ST is not set ># CONFIG_CHR_DEV_OSST is not set ># CONFIG_BLK_DEV_SR is not set ># CONFIG_CHR_DEV_SG is not set > ># ># Some SCSI devices (e.g. CD jukebox) support multiple LUNs ># ># CONFIG_SCSI_MULTI_LUN is not set ># CONFIG_SCSI_CONSTANTS is not set ># CONFIG_SCSI_LOGGING is not set > ># ># SCSI Transport Attributes ># ># CONFIG_SCSI_SPI_ATTRS is not set ># CONFIG_SCSI_FC_ATTRS is not set ># CONFIG_SCSI_ISCSI_ATTRS is not set > ># ># SCSI low-level drivers ># ># CONFIG_BLK_DEV_3W_XXXX_RAID is not set ># CONFIG_SCSI_3W_9XXX is not set ># CONFIG_SCSI_7000FASST is not set ># CONFIG_SCSI_ACARD is not set ># CONFIG_SCSI_AHA152X is not set ># CONFIG_SCSI_AHA1542 is not set ># CONFIG_SCSI_AACRAID is not set ># CONFIG_SCSI_AIC7XXX is not set ># CONFIG_SCSI_AIC7XXX_OLD is not set ># CONFIG_SCSI_AIC79XX is not set ># CONFIG_SCSI_DPT_I2O is not set ># CONFIG_SCSI_ADVANSYS is not set ># CONFIG_SCSI_IN2000 is not set ># CONFIG_MEGARAID_NEWGEN is not set ># CONFIG_MEGARAID_LEGACY is not set ># CONFIG_SCSI_SATA is not set ># CONFIG_SCSI_BUSLOGIC is not set ># CONFIG_SCSI_CPQFCTS is not set ># CONFIG_SCSI_DMX3191D is not set ># CONFIG_SCSI_DTC3280 is not set ># CONFIG_SCSI_EATA is not set ># CONFIG_SCSI_EATA_PIO is not set ># CONFIG_SCSI_FUTURE_DOMAIN is not set ># CONFIG_SCSI_GDTH is not set ># CONFIG_SCSI_GENERIC_NCR5380 is not set ># CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set ># CONFIG_SCSI_IPS is not set ># CONFIG_SCSI_INITIO is not set ># CONFIG_SCSI_INIA100 is not set ># CONFIG_SCSI_NCR53C406A is not set ># CONFIG_SCSI_SYM53C8XX_2 is not set ># CONFIG_SCSI_IPR is not set ># CONFIG_SCSI_PAS16 is not set ># CONFIG_SCSI_PCI2000 is not set ># CONFIG_SCSI_PCI2220I is not set ># CONFIG_SCSI_PSI240I is not set ># CONFIG_SCSI_QLOGIC_FAS is not set ># CONFIG_SCSI_QLOGIC_ISP is not set ># CONFIG_SCSI_QLOGIC_FC is not set ># CONFIG_SCSI_QLOGIC_1280 is not set >CONFIG_SCSI_QLA2XXX=y ># CONFIG_SCSI_QLA21XX is not set ># CONFIG_SCSI_QLA22XX is not set ># CONFIG_SCSI_QLA2300 is not set ># CONFIG_SCSI_QLA2322 is not set ># CONFIG_SCSI_QLA6312 is not set ># CONFIG_SCSI_SEAGATE is not set ># CONFIG_SCSI_SYM53C416 is not set ># CONFIG_SCSI_DC395x is not set ># CONFIG_SCSI_DC390T is not set ># CONFIG_SCSI_T128 is not set ># CONFIG_SCSI_U14_34F is not set ># CONFIG_SCSI_ULTRASTOR is not set ># CONFIG_SCSI_NSP32 is not set ># CONFIG_SCSI_DEBUG is not set > ># ># Old CD-ROM drivers (not SCSI, not IDE) ># ># CONFIG_CD_NO_IDESCSI is not set > ># ># Multi-device support (RAID and LVM) ># >CONFIG_MD=y ># CONFIG_BLK_DEV_MD is not set >CONFIG_BLK_DEV_DM=m ># CONFIG_DM_CRYPT is not set ># CONFIG_DM_SNAPSHOT is not set ># CONFIG_DM_MIRROR is not set ># CONFIG_DM_ZERO is not set > ># ># Fusion MPT device support ># ># CONFIG_FUSION is not set > ># ># IEEE 1394 (FireWire) support ># ># CONFIG_IEEE1394 is not set > ># ># I2O device support ># ># CONFIG_I2O is not set > ># ># Networking support ># >CONFIG_NET=y > ># ># Networking options ># >CONFIG_PACKET=y >CONFIG_PACKET_MMAP=y ># CONFIG_NETLINK_DEV is not set >CONFIG_UNIX=y ># CONFIG_NET_KEY is not set >CONFIG_INET=y >CONFIG_IP_MULTICAST=y >CONFIG_IP_ADVANCED_ROUTER=y ># CONFIG_IP_MULTIPLE_TABLES is not set ># CONFIG_IP_ROUTE_MULTIPATH is not set ># CONFIG_IP_ROUTE_VERBOSE is not set ># CONFIG_IP_PNP is not set ># CONFIG_NET_IPIP is not set ># CONFIG_NET_IPGRE is not set ># CONFIG_IP_MROUTE is not set ># CONFIG_ARPD is not set ># CONFIG_SYN_COOKIES is not set ># CONFIG_INET_AH is not set ># CONFIG_INET_ESP is not set ># CONFIG_INET_IPCOMP is not set ># CONFIG_INET_TUNNEL is not set >CONFIG_IP_TCPDIAG=y ># CONFIG_IP_TCPDIAG_IPV6 is not set > ># ># IP: Virtual Server Configuration ># ># CONFIG_IP_VS is not set ># CONFIG_IPV6 is not set >CONFIG_NETFILTER=y ># CONFIG_NETFILTER_DEBUG is not set > ># ># IP: Netfilter Configuration ># >CONFIG_IP_NF_CONNTRACK=m ># CONFIG_IP_NF_CT_ACCT is not set ># CONFIG_IP_NF_CONNTRACK_MARK is not set ># CONFIG_IP_NF_CT_PROTO_SCTP is not set ># CONFIG_IP_NF_FTP is not set ># CONFIG_IP_NF_IRC is not set ># CONFIG_IP_NF_TFTP is not set ># CONFIG_IP_NF_AMANDA is not set ># CONFIG_IP_NF_QUEUE is not set >CONFIG_IP_NF_IPTABLES=m ># CONFIG_IP_NF_MATCH_LIMIT is not set ># CONFIG_IP_NF_MATCH_IPRANGE is not set ># CONFIG_IP_NF_MATCH_MAC is not set ># CONFIG_IP_NF_MATCH_PKTTYPE is not set ># CONFIG_IP_NF_MATCH_MARK is not set ># CONFIG_IP_NF_MATCH_MULTIPORT is not set ># CONFIG_IP_NF_MATCH_TOS is not set ># CONFIG_IP_NF_MATCH_RECENT is not set ># CONFIG_IP_NF_MATCH_ECN is not set ># CONFIG_IP_NF_MATCH_DSCP is not set ># CONFIG_IP_NF_MATCH_AH_ESP is not set ># CONFIG_IP_NF_MATCH_LENGTH is not set ># CONFIG_IP_NF_MATCH_TTL is not set ># CONFIG_IP_NF_MATCH_TCPMSS is not set ># CONFIG_IP_NF_MATCH_HELPER is not set >CONFIG_IP_NF_MATCH_STATE=m >CONFIG_IP_NF_MATCH_CONNTRACK=m ># CONFIG_IP_NF_MATCH_OWNER is not set ># CONFIG_IP_NF_MATCH_ADDRTYPE is not set ># CONFIG_IP_NF_MATCH_REALM is not set ># CONFIG_IP_NF_MATCH_SCTP is not set ># CONFIG_IP_NF_MATCH_COMMENT is not set ># CONFIG_IP_NF_MATCH_HASHLIMIT is not set >CONFIG_IP_NF_FILTER=m >CONFIG_IP_NF_TARGET_REJECT=m >CONFIG_IP_NF_TARGET_LOG=m ># CONFIG_IP_NF_TARGET_ULOG is not set ># CONFIG_IP_NF_TARGET_TCPMSS is not set >CONFIG_IP_NF_NAT=m >CONFIG_IP_NF_NAT_NEEDED=y >CONFIG_IP_NF_TARGET_MASQUERADE=m >CONFIG_IP_NF_TARGET_REDIRECT=m ># CONFIG_IP_NF_TARGET_NETMAP is not set ># CONFIG_IP_NF_TARGET_SAME is not set ># CONFIG_IP_NF_NAT_SNMP_BASIC is not set ># CONFIG_IP_NF_MANGLE is not set ># CONFIG_IP_NF_RAW is not set ># CONFIG_IP_NF_ARPTABLES is not set > ># ># SCTP Configuration (EXPERIMENTAL) ># ># CONFIG_IP_SCTP is not set ># CONFIG_ATM is not set ># CONFIG_BRIDGE is not set ># CONFIG_VLAN_8021Q is not set ># CONFIG_DECNET is not set ># CONFIG_LLC2 is not set ># CONFIG_IPX is not set ># CONFIG_ATALK is not set ># CONFIG_X25 is not set ># CONFIG_LAPB is not set ># CONFIG_NET_DIVERT is not set ># CONFIG_ECONET is not set ># CONFIG_WAN_ROUTER is not set > ># ># QoS and/or fair queueing ># ># CONFIG_NET_SCHED is not set ># CONFIG_NET_CLS_ROUTE is not set > ># ># Network testing ># ># CONFIG_NET_PKTGEN is not set >CONFIG_NETPOLL=y ># CONFIG_NETPOLL_RX is not set ># CONFIG_NETPOLL_TRAP is not set >CONFIG_NET_POLL_CONTROLLER=y ># CONFIG_HAMRADIO is not set ># CONFIG_IRDA is not set ># CONFIG_BT is not set >CONFIG_NETDEVICES=y >CONFIG_DUMMY=m ># CONFIG_BONDING is not set ># CONFIG_EQUALIZER is not set >CONFIG_TUN=m ># CONFIG_NET_SB1000 is not set > ># ># ARCnet devices ># ># CONFIG_ARCNET is not set > ># ># Ethernet (10 or 100Mbit) ># ># CONFIG_NET_ETHERNET is not set > ># ># Ethernet (1000 Mbit) ># ># CONFIG_ACENIC is not set ># CONFIG_DL2K is not set >CONFIG_E1000=y ># CONFIG_E1000_NAPI is not set ># CONFIG_NS83820 is not set ># CONFIG_HAMACHI is not set ># CONFIG_YELLOWFIN is not set ># CONFIG_R8169 is not set ># CONFIG_SK98LIN is not set ># CONFIG_TIGON3 is not set > ># ># Ethernet (10000 Mbit) ># ># CONFIG_IXGB is not set ># CONFIG_S2IO is not set > ># ># Token Ring devices ># ># CONFIG_TR is not set > ># ># Wireless LAN (non-hamradio) ># ># CONFIG_NET_RADIO is not set > ># ># Wan interfaces ># ># CONFIG_WAN is not set ># CONFIG_FDDI is not set ># CONFIG_HIPPI is not set >CONFIG_PPP=m ># CONFIG_PPP_MULTILINK is not set ># CONFIG_PPP_FILTER is not set >CONFIG_PPP_ASYNC=m ># CONFIG_PPP_SYNC_TTY is not set >CONFIG_PPP_DEFLATE=m >CONFIG_PPP_BSDCOMP=m ># CONFIG_PPPOE is not set ># CONFIG_SLIP is not set ># CONFIG_NET_FC is not set ># CONFIG_SHAPER is not set >CONFIG_NETCONSOLE=m > ># ># ISDN subsystem ># ># CONFIG_ISDN is not set > ># ># Telephony Support ># ># CONFIG_PHONE is not set > ># ># Input device support ># >CONFIG_INPUT=y > ># ># Userland interfaces ># >CONFIG_INPUT_MOUSEDEV=y >CONFIG_INPUT_MOUSEDEV_PSAUX=y >CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 >CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ># CONFIG_INPUT_JOYDEV is not set ># CONFIG_INPUT_TSDEV is not set >CONFIG_INPUT_EVDEV=y ># CONFIG_INPUT_EVBUG is not set > ># ># Input I/O drivers ># ># CONFIG_GAMEPORT is not set >CONFIG_SOUND_GAMEPORT=y >CONFIG_SERIO=y >CONFIG_SERIO_I8042=y ># CONFIG_SERIO_SERPORT is not set ># CONFIG_SERIO_CT82C710 is not set ># CONFIG_SERIO_PCIPS2 is not set >CONFIG_SERIO_LIBPS2=y ># CONFIG_SERIO_RAW is not set > ># ># Input Device Drivers ># >CONFIG_INPUT_KEYBOARD=y >CONFIG_KEYBOARD_ATKBD=y ># CONFIG_KEYBOARD_SUNKBD is not set ># CONFIG_KEYBOARD_LKKBD is not set ># CONFIG_KEYBOARD_XTKBD is not set ># CONFIG_KEYBOARD_NEWTON is not set >CONFIG_INPUT_MOUSE=y >CONFIG_MOUSE_PS2=y ># CONFIG_MOUSE_SERIAL is not set ># CONFIG_MOUSE_INPORT is not set ># CONFIG_MOUSE_LOGIBM is not set ># CONFIG_MOUSE_PC110PAD is not set ># CONFIG_MOUSE_VSXXXAA is not set ># CONFIG_INPUT_JOYSTICK is not set ># CONFIG_INPUT_TOUCHSCREEN is not set >CONFIG_INPUT_MISC=y >CONFIG_INPUT_PCSPKR=y ># CONFIG_INPUT_UINPUT is not set > ># ># Character devices ># >CONFIG_VT=y >CONFIG_VT_CONSOLE=y >CONFIG_HW_CONSOLE=y ># CONFIG_SERIAL_NONSTANDARD is not set > ># ># Serial drivers ># ># CONFIG_SERIAL_8250 is not set > ># ># Non-8250 serial port support ># >CONFIG_UNIX98_PTYS=y >CONFIG_LEGACY_PTYS=y >CONFIG_LEGACY_PTY_COUNT=256 > ># ># IPMI ># ># CONFIG_IPMI_HANDLER is not set > ># ># Watchdog Cards ># ># CONFIG_WATCHDOG is not set ># CONFIG_HW_RANDOM is not set ># CONFIG_NVRAM is not set ># CONFIG_RTC is not set ># CONFIG_GEN_RTC is not set ># CONFIG_DTLK is not set ># CONFIG_R3964 is not set ># CONFIG_APPLICOM is not set ># CONFIG_SONYPI is not set > ># ># Ftape, the floppy tape device driver ># ># CONFIG_FTAPE is not set >CONFIG_AGP=y ># CONFIG_AGP_ALI is not set ># CONFIG_AGP_ATI is not set ># CONFIG_AGP_AMD is not set ># CONFIG_AGP_AMD64 is not set >CONFIG_AGP_INTEL=y ># CONFIG_AGP_INTEL_MCH is not set ># CONFIG_AGP_NVIDIA is not set ># CONFIG_AGP_SIS is not set ># CONFIG_AGP_SWORKS is not set ># CONFIG_AGP_VIA is not set ># CONFIG_AGP_EFFICEON is not set >CONFIG_DRM=y ># CONFIG_DRM_TDFX is not set ># CONFIG_DRM_GAMMA is not set ># CONFIG_DRM_R128 is not set ># CONFIG_DRM_RADEON is not set ># CONFIG_DRM_I810 is not set >CONFIG_DRM_I830=m >CONFIG_DRM_I915=m ># CONFIG_DRM_MGA is not set ># CONFIG_DRM_SIS is not set ># CONFIG_MWAVE is not set ># CONFIG_RAW_DRIVER is not set ># CONFIG_HPET is not set ># CONFIG_HANGCHECK_TIMER is not set > ># ># I2C support ># ># CONFIG_I2C is not set > ># ># Dallas's 1-wire bus ># ># CONFIG_W1 is not set > ># ># Misc devices ># ># CONFIG_IBM_ASM is not set > ># ># Multimedia devices ># >CONFIG_VIDEO_DEV=m > ># ># Video For Linux ># > ># ># Video Adapters ># ># CONFIG_VIDEO_PMS is not set ># CONFIG_VIDEO_CPIA is not set ># CONFIG_VIDEO_STRADIS is not set ># CONFIG_VIDEO_MXB is not set ># CONFIG_VIDEO_DPC is not set ># CONFIG_VIDEO_HEXIUM_ORION is not set ># CONFIG_VIDEO_HEXIUM_GEMINI is not set ># CONFIG_VIDEO_CX88 is not set > ># ># Radio Adapters ># ># CONFIG_RADIO_CADET is not set ># CONFIG_RADIO_RTRACK is not set ># CONFIG_RADIO_RTRACK2 is not set ># CONFIG_RADIO_AZTECH is not set ># CONFIG_RADIO_GEMTEK is not set ># CONFIG_RADIO_GEMTEK_PCI is not set ># CONFIG_RADIO_MAXIRADIO is not set ># CONFIG_RADIO_MAESTRO is not set ># CONFIG_RADIO_SF16FMI is not set ># CONFIG_RADIO_SF16FMR2 is not set ># CONFIG_RADIO_TERRATEC is not set ># CONFIG_RADIO_TRUST is not set ># CONFIG_RADIO_TYPHOON is not set ># CONFIG_RADIO_ZOLTRIX is not set > ># ># Digital Video Broadcasting Devices ># ># CONFIG_DVB is not set > ># ># Graphics support ># >CONFIG_FB=y >CONFIG_FB_MODE_HELPERS=y ># CONFIG_FB_TILEBLITTING is not set ># CONFIG_FB_CIRRUS is not set ># CONFIG_FB_PM2 is not set ># CONFIG_FB_CYBER2000 is not set ># CONFIG_FB_ASILIANT is not set ># CONFIG_FB_IMSTT is not set ># CONFIG_FB_VGA16 is not set ># CONFIG_FB_VESA is not set >CONFIG_VIDEO_SELECT=y ># CONFIG_FB_HGA is not set ># CONFIG_FB_RIVA is not set ># CONFIG_FB_I810 is not set >CONFIG_FB_INTEL=y ># CONFIG_FB_INTEL_DEBUG is not set ># CONFIG_FB_MATROX is not set ># CONFIG_FB_RADEON_OLD is not set ># CONFIG_FB_RADEON is not set ># CONFIG_FB_ATY128 is not set ># CONFIG_FB_ATY is not set ># CONFIG_FB_SAVAGE is not set ># CONFIG_FB_SIS is not set ># CONFIG_FB_NEOMAGIC is not set ># CONFIG_FB_KYRO is not set ># CONFIG_FB_3DFX is not set ># CONFIG_FB_VOODOO1 is not set ># CONFIG_FB_TRIDENT is not set ># CONFIG_FB_PM3 is not set ># CONFIG_FB_VIRTUAL is not set > ># ># Console display driver support ># >CONFIG_VGA_CONSOLE=y ># CONFIG_MDA_CONSOLE is not set >CONFIG_DUMMY_CONSOLE=y >CONFIG_FRAMEBUFFER_CONSOLE=y ># CONFIG_FONTS is not set >CONFIG_FONT_8x8=y >CONFIG_FONT_8x16=y > ># ># Logo configuration ># >CONFIG_LOGO=y >CONFIG_LOGO_LINUX_MONO=y >CONFIG_LOGO_LINUX_VGA16=y >CONFIG_LOGO_LINUX_CLUT224=y ># CONFIG_BACKLIGHT_LCD_SUPPORT is not set > ># ># Sound ># >CONFIG_SOUND=y > ># ># Advanced Linux Sound Architecture ># >CONFIG_SND=y >CONFIG_SND_TIMER=y >CONFIG_SND_PCM=y >CONFIG_SND_RAWMIDI=m >CONFIG_SND_SEQUENCER=y >CONFIG_SND_SEQ_DUMMY=y >CONFIG_SND_OSSEMUL=y >CONFIG_SND_MIXER_OSS=y >CONFIG_SND_PCM_OSS=y >CONFIG_SND_SEQUENCER_OSS=y ># CONFIG_SND_VERBOSE_PRINTK is not set ># CONFIG_SND_DEBUG is not set > ># ># Generic devices ># >CONFIG_SND_DUMMY=m >CONFIG_SND_VIRMIDI=m ># CONFIG_SND_MTPAV is not set ># CONFIG_SND_SERIAL_U16550 is not set ># CONFIG_SND_MPU401 is not set > ># ># ISA devices ># ># CONFIG_SND_AD1848 is not set ># CONFIG_SND_CS4231 is not set ># CONFIG_SND_CS4232 is not set ># CONFIG_SND_CS4236 is not set ># CONFIG_SND_ES1688 is not set ># CONFIG_SND_ES18XX is not set ># CONFIG_SND_GUSCLASSIC is not set ># CONFIG_SND_GUSEXTREME is not set ># CONFIG_SND_GUSMAX is not set ># CONFIG_SND_INTERWAVE is not set ># CONFIG_SND_INTERWAVE_STB is not set ># CONFIG_SND_OPTI92X_AD1848 is not set ># CONFIG_SND_OPTI92X_CS4231 is not set ># CONFIG_SND_OPTI93X is not set ># CONFIG_SND_SB8 is not set ># CONFIG_SND_SB16 is not set ># CONFIG_SND_SBAWE is not set ># CONFIG_SND_WAVEFRONT is not set ># CONFIG_SND_CMI8330 is not set ># CONFIG_SND_OPL3SA2 is not set ># CONFIG_SND_SGALAXY is not set ># CONFIG_SND_SSCAPE is not set > ># ># PCI devices ># >CONFIG_SND_AC97_CODEC=m ># CONFIG_SND_ALI5451 is not set ># CONFIG_SND_ATIIXP is not set ># CONFIG_SND_ATIIXP_MODEM is not set ># CONFIG_SND_AU8810 is not set ># CONFIG_SND_AU8820 is not set ># CONFIG_SND_AU8830 is not set ># CONFIG_SND_AZT3328 is not set ># CONFIG_SND_BT87X is not set ># CONFIG_SND_CS46XX is not set ># CONFIG_SND_CS4281 is not set ># CONFIG_SND_EMU10K1 is not set ># CONFIG_SND_EMU10K1X is not set ># CONFIG_SND_CA0106 is not set ># CONFIG_SND_KORG1212 is not set ># CONFIG_SND_MIXART is not set ># CONFIG_SND_NM256 is not set ># CONFIG_SND_RME32 is not set ># CONFIG_SND_RME96 is not set ># CONFIG_SND_RME9652 is not set ># CONFIG_SND_HDSP is not set ># CONFIG_SND_TRIDENT is not set ># CONFIG_SND_YMFPCI is not set ># CONFIG_SND_ALS4000 is not set ># CONFIG_SND_CMIPCI is not set ># CONFIG_SND_ENS1370 is not set ># CONFIG_SND_ENS1371 is not set ># CONFIG_SND_ES1938 is not set ># CONFIG_SND_ES1968 is not set ># CONFIG_SND_MAESTRO3 is not set ># CONFIG_SND_FM801 is not set ># CONFIG_SND_ICE1712 is not set ># CONFIG_SND_ICE1724 is not set >CONFIG_SND_INTEL8X0=m ># CONFIG_SND_INTEL8X0M is not set ># CONFIG_SND_SONICVIBES is not set ># CONFIG_SND_VIA82XX is not set ># CONFIG_SND_VIA82XX_MODEM is not set ># CONFIG_SND_VX222 is not set > ># ># USB devices ># ># CONFIG_SND_USB_AUDIO is not set ># CONFIG_SND_USB_USX2Y is not set > ># ># Open Sound System ># ># CONFIG_SOUND_PRIME is not set > ># ># USB support ># >CONFIG_USB=y ># CONFIG_USB_DEBUG is not set > ># ># Miscellaneous USB options ># >CONFIG_USB_DEVICEFS=y >CONFIG_USB_BANDWIDTH=y ># CONFIG_USB_DYNAMIC_MINORS is not set ># CONFIG_USB_SUSPEND is not set ># CONFIG_USB_OTG is not set >CONFIG_USB_ARCH_HAS_HCD=y >CONFIG_USB_ARCH_HAS_OHCI=y > ># ># USB Host Controller Drivers ># >CONFIG_USB_EHCI_HCD=m ># CONFIG_USB_EHCI_SPLIT_ISO is not set ># CONFIG_USB_EHCI_ROOT_HUB_TT is not set ># CONFIG_USB_OHCI_HCD is not set >CONFIG_USB_UHCI_HCD=m ># CONFIG_USB_SL811_HCD is not set > ># ># USB Device Class drivers ># ># CONFIG_USB_AUDIO is not set ># CONFIG_USB_BLUETOOTH_TTY is not set ># CONFIG_USB_MIDI is not set ># CONFIG_USB_ACM is not set ># CONFIG_USB_PRINTER is not set > ># ># NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information ># >CONFIG_USB_STORAGE=m ># CONFIG_USB_STORAGE_DEBUG is not set ># CONFIG_USB_STORAGE_RW_DETECT is not set ># CONFIG_USB_STORAGE_DATAFAB is not set ># CONFIG_USB_STORAGE_FREECOM is not set ># CONFIG_USB_STORAGE_ISD200 is not set ># CONFIG_USB_STORAGE_DPCM is not set ># CONFIG_USB_STORAGE_HP8200e is not set ># CONFIG_USB_STORAGE_SDDR09 is not set ># CONFIG_USB_STORAGE_SDDR55 is not set ># CONFIG_USB_STORAGE_JUMPSHOT is not set > ># ># USB Input Devices ># >CONFIG_USB_HID=m >CONFIG_USB_HIDINPUT=y ># CONFIG_HID_FF is not set >CONFIG_USB_HIDDEV=y > ># ># USB HID Boot Protocol drivers ># ># CONFIG_USB_KBD is not set ># CONFIG_USB_MOUSE is not set ># CONFIG_USB_AIPTEK is not set ># CONFIG_USB_WACOM is not set ># CONFIG_USB_KBTAB is not set ># CONFIG_USB_POWERMATE is not set ># CONFIG_USB_MTOUCH is not set ># CONFIG_USB_EGALAX is not set ># CONFIG_USB_XPAD is not set ># CONFIG_USB_ATI_REMOTE is not set > ># ># USB Imaging devices ># ># CONFIG_USB_MDC800 is not set ># CONFIG_USB_MICROTEK is not set ># CONFIG_USB_HPUSBSCSI is not set > ># ># USB Multimedia devices ># ># CONFIG_USB_DABUSB is not set ># CONFIG_USB_VICAM is not set ># CONFIG_USB_DSBR is not set ># CONFIG_USB_IBMCAM is not set ># CONFIG_USB_KONICAWC is not set ># CONFIG_USB_OV511 is not set ># CONFIG_USB_SE401 is not set ># CONFIG_USB_SN9C102 is not set ># CONFIG_USB_STV680 is not set > ># ># USB Network Adapters ># ># CONFIG_USB_CATC is not set ># CONFIG_USB_KAWETH is not set ># CONFIG_USB_PEGASUS is not set ># CONFIG_USB_RTL8150 is not set ># CONFIG_USB_USBNET is not set > ># ># USB port drivers ># > ># ># USB Serial Converter support ># >CONFIG_USB_SERIAL=m ># CONFIG_USB_SERIAL_GENERIC is not set ># CONFIG_USB_SERIAL_BELKIN is not set ># CONFIG_USB_SERIAL_WHITEHEAT is not set ># CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set ># CONFIG_USB_SERIAL_CYPRESS_M8 is not set ># CONFIG_USB_SERIAL_EMPEG is not set ># CONFIG_USB_SERIAL_FTDI_SIO is not set >CONFIG_USB_SERIAL_VISOR=m ># CONFIG_USB_SERIAL_IPAQ is not set ># CONFIG_USB_SERIAL_IR is not set ># CONFIG_USB_SERIAL_EDGEPORT is not set ># CONFIG_USB_SERIAL_EDGEPORT_TI is not set ># CONFIG_USB_SERIAL_GARMIN is not set ># CONFIG_USB_SERIAL_IPW is not set ># CONFIG_USB_SERIAL_KEYSPAN_PDA is not set ># CONFIG_USB_SERIAL_KEYSPAN is not set ># CONFIG_USB_SERIAL_KLSI is not set ># CONFIG_USB_SERIAL_KOBIL_SCT is not set ># CONFIG_USB_SERIAL_MCT_U232 is not set ># CONFIG_USB_SERIAL_PL2303 is not set ># CONFIG_USB_SERIAL_SAFE is not set ># CONFIG_USB_SERIAL_TI is not set ># CONFIG_USB_SERIAL_CYBERJACK is not set ># CONFIG_USB_SERIAL_XIRCOM is not set ># CONFIG_USB_SERIAL_OMNINET is not set > ># ># USB Miscellaneous drivers ># ># CONFIG_USB_EMI62 is not set ># CONFIG_USB_EMI26 is not set ># CONFIG_USB_AUERSWALD is not set ># CONFIG_USB_RIO500 is not set ># CONFIG_USB_LEGOTOWER is not set ># CONFIG_USB_LCD is not set ># CONFIG_USB_LED is not set ># CONFIG_USB_CYTHERM is not set ># CONFIG_USB_PHIDGETKIT is not set ># CONFIG_USB_PHIDGETSERVO is not set ># CONFIG_USB_IDMOUSE is not set ># CONFIG_USB_TEST is not set > ># ># USB ATM/DSL drivers ># > ># ># USB Gadget Support ># ># CONFIG_USB_GADGET is not set > ># ># MMC/SD Card support ># ># CONFIG_MMC is not set > ># ># InfiniBand support ># ># CONFIG_INFINIBAND is not set > ># ># File systems ># >CONFIG_EXT2_FS=y ># CONFIG_EXT2_FS_XATTR is not set >CONFIG_EXT3_FS=y >CONFIG_EXT3_FS_XATTR=y >CONFIG_EXT3_FS_POSIX_ACL=y ># CONFIG_EXT3_FS_SECURITY is not set >CONFIG_JBD=y ># CONFIG_JBD_DEBUG is not set >CONFIG_FS_MBCACHE=y >CONFIG_REISERFS_FS=m ># CONFIG_REISERFS_CHECK is not set >CONFIG_REISERFS_PROC_INFO=y >CONFIG_REISERFS_FS_XATTR=y >CONFIG_REISERFS_FS_POSIX_ACL=y ># CONFIG_REISERFS_FS_SECURITY is not set ># CONFIG_JFS_FS is not set >CONFIG_FS_POSIX_ACL=y > ># ># XFS support ># ># CONFIG_XFS_FS is not set ># CONFIG_MINIX_FS is not set ># CONFIG_ROMFS_FS is not set ># CONFIG_QUOTA is not set >CONFIG_DNOTIFY=y >CONFIG_AUTOFS_FS=m >CONFIG_AUTOFS4_FS=m > ># ># CD-ROM/DVD Filesystems ># >CONFIG_ISO9660_FS=m >CONFIG_JOLIET=y >CONFIG_ZISOFS=y >CONFIG_ZISOFS_FS=m >CONFIG_UDF_FS=m >CONFIG_UDF_NLS=y > ># ># DOS/FAT/NT Filesystems ># >CONFIG_FAT_FS=m >CONFIG_MSDOS_FS=m >CONFIG_VFAT_FS=m >CONFIG_FAT_DEFAULT_CODEPAGE=850 >CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" ># CONFIG_NTFS_FS is not set > ># ># Pseudo filesystems ># >CONFIG_PROC_FS=y >CONFIG_PROC_KCORE=y >CONFIG_SYSFS=y >CONFIG_DEVFS_FS=y ># CONFIG_DEVFS_MOUNT is not set ># CONFIG_DEVFS_DEBUG is not set ># CONFIG_DEVPTS_FS_XATTR is not set >CONFIG_TMPFS=y >CONFIG_TMPFS_XATTR=y >CONFIG_TMPFS_SECURITY=y ># CONFIG_HUGETLBFS is not set ># CONFIG_HUGETLB_PAGE is not set >CONFIG_RAMFS=y > ># ># Miscellaneous filesystems ># ># CONFIG_ADFS_FS is not set ># CONFIG_AFFS_FS is not set ># CONFIG_HFS_FS is not set ># CONFIG_HFSPLUS_FS is not set ># CONFIG_BEFS_FS is not set ># CONFIG_BFS_FS is not set ># CONFIG_EFS_FS is not set ># CONFIG_CRAMFS is not set ># CONFIG_VXFS_FS is not set ># CONFIG_HPFS_FS is not set ># CONFIG_QNX4FS_FS is not set ># CONFIG_SYSV_FS is not set ># CONFIG_UFS_FS is not set > ># ># Network File Systems ># >CONFIG_NFS_FS=m >CONFIG_NFS_V3=y ># CONFIG_NFS_V4 is not set ># CONFIG_NFS_DIRECTIO is not set >CONFIG_NFSD=m >CONFIG_NFSD_V3=y ># CONFIG_NFSD_V4 is not set >CONFIG_NFSD_TCP=y >CONFIG_LOCKD=m >CONFIG_LOCKD_V4=y >CONFIG_EXPORTFS=m >CONFIG_SUNRPC=m ># CONFIG_RPCSEC_GSS_KRB5 is not set ># CONFIG_RPCSEC_GSS_SPKM3 is not set >CONFIG_SMB_FS=m >CONFIG_SMB_NLS_DEFAULT=y >CONFIG_SMB_NLS_REMOTE="cp850" >CONFIG_CIFS=m >CONFIG_CIFS_STATS=y >CONFIG_CIFS_XATTR=y >CONFIG_CIFS_POSIX=y ># CONFIG_CIFS_EXPERIMENTAL is not set ># CONFIG_NCP_FS is not set ># CONFIG_CODA_FS is not set ># CONFIG_AFS_FS is not set > ># ># Partition Types ># ># CONFIG_PARTITION_ADVANCED is not set >CONFIG_MSDOS_PARTITION=y > ># ># Native Language Support ># >CONFIG_NLS=y >CONFIG_NLS_DEFAULT="iso8859-15" >CONFIG_NLS_CODEPAGE_437=m ># CONFIG_NLS_CODEPAGE_737 is not set ># CONFIG_NLS_CODEPAGE_775 is not set >CONFIG_NLS_CODEPAGE_850=m ># CONFIG_NLS_CODEPAGE_852 is not set ># CONFIG_NLS_CODEPAGE_855 is not set ># CONFIG_NLS_CODEPAGE_857 is not set ># CONFIG_NLS_CODEPAGE_860 is not set ># CONFIG_NLS_CODEPAGE_861 is not set ># CONFIG_NLS_CODEPAGE_862 is not set ># CONFIG_NLS_CODEPAGE_863 is not set ># CONFIG_NLS_CODEPAGE_864 is not set ># CONFIG_NLS_CODEPAGE_865 is not set ># CONFIG_NLS_CODEPAGE_866 is not set ># CONFIG_NLS_CODEPAGE_869 is not set ># CONFIG_NLS_CODEPAGE_936 is not set ># CONFIG_NLS_CODEPAGE_950 is not set ># CONFIG_NLS_CODEPAGE_932 is not set ># CONFIG_NLS_CODEPAGE_949 is not set ># CONFIG_NLS_CODEPAGE_874 is not set ># CONFIG_NLS_ISO8859_8 is not set ># CONFIG_NLS_CODEPAGE_1250 is not set ># CONFIG_NLS_CODEPAGE_1251 is not set ># CONFIG_NLS_ASCII is not set >CONFIG_NLS_ISO8859_1=m ># CONFIG_NLS_ISO8859_2 is not set ># CONFIG_NLS_ISO8859_3 is not set ># CONFIG_NLS_ISO8859_4 is not set ># CONFIG_NLS_ISO8859_5 is not set ># CONFIG_NLS_ISO8859_6 is not set ># CONFIG_NLS_ISO8859_7 is not set ># CONFIG_NLS_ISO8859_9 is not set ># CONFIG_NLS_ISO8859_13 is not set ># CONFIG_NLS_ISO8859_14 is not set >CONFIG_NLS_ISO8859_15=m ># CONFIG_NLS_KOI8_R is not set ># CONFIG_NLS_KOI8_U is not set >CONFIG_NLS_UTF8=m > ># ># Profiling support ># ># CONFIG_PROFILING is not set > ># ># Kernel hacking ># >CONFIG_DEBUG_KERNEL=y >CONFIG_MAGIC_SYSRQ=y >CONFIG_SCHEDSTATS=y ># CONFIG_DEBUG_SLAB is not set >CONFIG_DEBUG_PREEMPT=y ># CONFIG_DEBUG_SPINLOCK is not set ># CONFIG_DEBUG_SPINLOCK_SLEEP is not set ># CONFIG_DEBUG_KOBJECT is not set >CONFIG_DEBUG_BUGVERBOSE=y ># CONFIG_DEBUG_INFO is not set >CONFIG_DEBUG_FS=y ># CONFIG_FRAME_POINTER is not set >CONFIG_EARLY_PRINTK=y >CONFIG_DEBUG_STACKOVERFLOW=y ># CONFIG_KPROBES is not set ># CONFIG_DEBUG_STACK_USAGE is not set ># CONFIG_DEBUG_PAGEALLOC is not set >CONFIG_4KSTACKS=y > ># ># Security options ># ># CONFIG_KEYS is not set ># CONFIG_SECURITY is not set > ># ># Cryptographic options ># ># CONFIG_CRYPTO is not set > ># ># Hardware crypto devices ># > ># ># Library routines ># >CONFIG_CRC_CCITT=m >CONFIG_CRC32=y ># CONFIG_LIBCRC32C is not set >CONFIG_ZLIB_INFLATE=m >CONFIG_ZLIB_DEFLATE=m >CONFIG_GENERIC_HARDIRQS=y >CONFIG_GENERIC_IRQ_PROBE=y >CONFIG_X86_BIOS_REBOOT=y >CONFIG_PC=y > > >------------------------------------------------------------------------ > >Linux version 2.6.11=Macvin (bgoglin@macvin) (version gcc 3.3.5 (Debian 1:3.3.5-8)) #2 Tue Mar 8 10:20:10 CET 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fe71000 (usable) > BIOS-e820: 000000001fe71000 - 000000001fe73000 (ACPI NVS) > BIOS-e820: 000000001fe73000 - 000000001fe94000 (ACPI data) > BIOS-e820: 000000001fe94000 - 000000001ff00000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) >510MB LOWMEM available. >On node 0 totalpages: 130673 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 126577 pages, LIFO batch:16 > HighMem zone: 0 pages, LIFO batch:1 >DMI 2.3 present. >ACPI: RSDP (v000 DELL ) @ 0x000feba0 >ACPI: RSDT (v001 DELL GX260 0x00000009 ASL 0x00000061) @ 0x000fd509 >ACPI: FADT (v001 DELL GX260 0x00000009 ASL 0x00000061) @ 0x000fd541 >ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffdaccc >ACPI: MADT (v001 DELL GX260 0x00000009 ASL 0x00000061) @ 0x000fd5b5 >ACPI: BOOT (v001 DELL GX260 0x00000009 ASL 0x00000061) @ 0x000fd621 >ACPI: ASF! (v016 DELL GX260 0x00000009 ASL 0x00000061) @ 0x000fd649 >ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 >ACPI: PM-Timer IO Port: 0x808 >Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000) >Built 1 zonelists >Kernel command line: BOOT_IMAGE=2.6.11-fb ro root=301 >Initializing CPU#0 >CPU 0 irqstacks, hard=c045a000 soft=c0459000 >PID hash table entries: 2048 (order: 11, 32768 bytes) >Detected 2391.541 MHz processor. >Using pmtmr for high-res timesource >Console: colour VGA+ 80x25 >Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) >Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) >Memory: 513920k/522692k available (2200k kernel code, 8204k reserved, 1044k data, 156k init, 0k highmem) >Checking if this processor honours the WP bit even in supervisor mode... Ok. >Calibrating delay loop... 4734.97 BogoMIPS (lpj=2367488) >Mount-cache hash table entries: 512 (order: 0, 4096 bytes) >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Checking 'hlt' instruction... OK. >ACPI: setting ELCR to 0200 (from 0e08) >NET: Registered protocol family 16 >PCI: PCI BIOS revision 2.10 entry at 0xfbdea, last bus=1 >PCI: Using configuration type 1 >mtrr: v2.0 (20020519) >ACPI: Subsystem revision 20050211 >ACPI: Interpreter enabled >ACPI: Using PIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (00:00) >PCI: Probing PCI hardware (bus 00) >PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 >PCI: Transparent bridge - 0000:00:1e.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 11 devices >PnPBIOS: Disabled by ACPI PNP >SCSI subsystem initialized >usbcore: registered new driver usbfs >usbcore: registered new driver hub >PCI: Using ACPI for IRQ routing >** PCI interrupts are no longer routed automatically. If this >** causes a device to stop working, it is probably because the >** driver failed to call pci_enable_device(). As a temporary >** workaround, the "pci=routeirq" argument restores the old >** behavior. If this argument makes the device work again, >** please email the output of "lspci" to bjorn.helgaas@hp.com >** so I can fix the driver. >pnp: 00:0a: ioport range 0x800-0x85f could not be reserved >pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved >pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved >Simple Boot Flag at 0x7a set to 0x80 >Machine check exception polling timer started. >devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) >devfs: boot_options: 0x0 >ACPI: Power Button (FF) [PWRF] >Linux agpgart interface v0.100 (c) Dave Jones >agpgart: Detected an Intel 845G Chipset. >agpgart: Maximum main memory to use for agp memory: 438M >agpgart: Detected 892K stolen memory. >agpgart: AGP aperture is 128M @ 0xe8000000 >[drm] Initialized drm 1.0.0 20040925 >intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets >intelfb: Version 0.9.2 >ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 >PCI: setting IRQ 9 as level-triggered >ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 >intelfb: 00:02.0: Intel(R) 845G, aperture size 128MB, stolen memory 892kB >intelfb: Mode is interlaced. >intelfb: Initial video mode is 1024x768-16@60. >Console: switching to colour frame buffer device 128x48 >ACPI: PS/2 Keyboard Controller [KBD] at I/O 0x60, 0x64, irq 1 >ACPI: PS/2 Mouse Controller [MOU] at irq 12 >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2 >Copyright (c) 1999-2004 Intel Corporation. >ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 >PCI: setting IRQ 10 as level-triggered >ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 >e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >ICH4: IDE controller at PCI slot 0000:00:1f.1 >PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) >ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10 >ICH4: chipset revision 1 >ICH4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio >Probing IDE interface ide0... >hda: IC35L060AVV207-0, ATA DISK drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >hdc: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >Probing IDE interface ide2... >Probing IDE interface ide3... >Probing IDE interface ide4... >Probing IDE interface ide5... >hda: max request size: 1024KiB >hda: 78125000 sectors (40000 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) >hda: cache flushes supported > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 > >hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA >Uniform CD-ROM driver Revision: 3.20 >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard on isa0060/serio0 >input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 >input: PC Speaker >Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC). >ALSA device list: > No soundcards found. >NET: Registered protocol family 2 >IP: routing cache hash table of 4096 buckets, 32Kbytes >TCP established hash table entries: 16384 (order: 5, 131072 bytes) >TCP bind hash table entries: 16384 (order: 4, 65536 bytes) >TCP: Hash tables configured (established 16384 bind 16384) >NET: Registered protocol family 1 >NET: Registered protocol family 17 >ACPI wakeup devices: >VBTN PCI0 USB0 USB1 USB2 PCI1 KBD >ACPI: (supports S0 S1 S3 S4 S5) >VFS: Mounted root (ext2 filesystem) readonly. >Freeing unused kernel memory: 156k freed >Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 >ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 >PCI: setting IRQ 11 as level-triggered >ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 >PCI: Setting latency timer of device 0000:00:1f.5 to 64 >intel8x0_measure_ac97_clock: measured 49237 usecs >intel8x0: clocking to 48000 >kjournald starting. Commit interval 5 seconds >EXT3 FS on hda5, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 5 seconds >EXT3 FS on hda3, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >kjournald starting. Commit interval 5 seconds >EXT3 FS on hda6, internal journal >EXT3-fs: mounted filesystem with ordered data mode. >ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 >PCI: setting IRQ 3 as level-triggered >ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 3 (level, low) -> IRQ 3 >ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >ehci_hcd 0000:00:1d.7: irq 3, pci mem 0xffa00800 >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 >PCI: cache line size of 128 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 6 ports detected >USB Universal Host Controller Interface driver v2.2 >ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9 >uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: irq 9, io base 0xff80 >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 >ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 >uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: irq 11, io base 0xff60 >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10 >uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: irq 10, io base 0xff40 >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >Floppy drive(s): fd0 is 1.44M >FDC 0 is a post-1991 82077 >e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex >ip_tables: (C) 2000-2002 Netfilter core team >ip_conntrack version 2.1 (4083 buckets, 32664 max) - 212 bytes per conntrack >device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com >tun: Universal TUN/TAP device driver, 1.6 >tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> >intelfb: ring buffer : space: 8488 wanted 65472 >intelfb: lockup - turning off hardware acceleration > > >------------------------------------------------------------------------ > >0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01) > Subsystem: Dell: Unknown device 0126 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] > Capabilities: <available only to root> > >0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) (prog-if 00 [VGA]) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] > Region 1: Memory at ff680000 (32-bit, non-prefetchable) [size=512K] > Capabilities: <available only to root> > >0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 9 > Region 4: I/O ports at ff80 [size=32] > >0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at ff60 [size=32] > >0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 10 > Region 4: I/O ports at ff40 [size=32] > >0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01) (prog-if 20 [EHCI]) > Subsystem: Dell: Unknown device 0126 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin D routed to IRQ 3 > Region 0: Memory at ffa00800 (32-bit, non-prefetchable) [size=1K] > Capabilities: <available only to root> > >0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: ff800000-ff9fffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > >0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at <unassigned> > Region 1: I/O ports at <unassigned> > Region 2: I/O ports at <unassigned> > Region 3: I/O ports at <unassigned> > Region 4: I/O ports at ffa0 [size=16] > Region 5: Memory at 1ff00000 (32-bit, non-prefetchable) [size=1K] > >0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at dc80 [size=32] > >0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) > Subsystem: Dell: Unknown device 0126 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at d800 [size=256] > Region 1: I/O ports at dc40 [size=64] > Region 2: Memory at ffa00400 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at ffa00000 (32-bit, non-prefetchable) [size=256] > Capabilities: <available only to root> > >0000:01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) > Subsystem: Dell: Unknown device 002e > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes) > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at ff8e0000 (32-bit, non-prefetchable) [size=128K] > Region 2: I/O ports at ecc0 [size=64] > Capabilities: <available only to root> > > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |