[lkml]   [2005]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[SATA] libata-dev queue updated
    Merged recent upstream changes into libata-dev queue.  No new patches 
    have found their way into libata-dev since last email.

    BK URL, Patch URL, and changelog attached.

    Note that the patch is diff'd against 2.6.11-bk6, which won't exist
    until four hours after this email is sent.


    BK users:

    bk pull bk://


    This will update the following files:

    drivers/scsi/Kconfig | 18
    drivers/scsi/Makefile | 2
    drivers/scsi/ahci.c | 95 +++--
    drivers/scsi/ata_adma.c | 778 +++++++++++++++++++++++++++++++++++++++++++
    drivers/scsi/libata-core.c | 296 +++++++++-------
    drivers/scsi/libata-scsi.c | 701 ++++++++++++++++++++++++++++++++------
    drivers/scsi/libata.h | 6
    drivers/scsi/pata_pdc2027x.c | 771 ++++++++++++++++++++++++++++++++++++++++++
    drivers/scsi/sata_promise.c | 84 ++++
    include/linux/ata.h | 15
    include/linux/libata.h | 10
    include/scsi/scsi.h | 3
    12 files changed, 2507 insertions(+), 272 deletions(-)

    through these ChangeSets:

    o [libata scsi] support 12-byte passthru CDB
    o [libata scsi] passthru CDB check condition processing
    o T10/04-262 ATA pass thru - patch

    o [libata sata_promise] support PATA ports on SATA controllers

    Albert Lee:
    o [libata] use init-device-params ATA command where needed
    o [libata] ata_scsi_verify_xlat() fix
    o pdc2027x timing register fix for 100MHz
    o [libata] CHS support: add CHS support to ata_scsi_verify_xlat(), ata_scsi_rw_xlat() and ata_scsiop_read_cap().
    o [libata] CHS support: reorganize read/write translation in ata_scsi_rw_xlat()
    o [libata] CHS support: rename vars (s/sector/block/) in ata_scsi_verify_xlat()
    o [libata] CHS support: detect C/H/S at IDENTIFY DEVICE time
    o [libata] CHS support: add definitions to headers
    o pdc2027x timing register bug fix
    o [libata pdc2027x] fix incorrect pio and mwdma masks
    o [libata pdc2027x] remove quirks and ROM enable
    o [libata] add driver for Promise PATA 2027x

    Brad Campbell:
    o libata basic detection and errata for PATA->SATA bridges

    Jeff Garzik:
    o [libata ahci] support PCI MSI interrupt vector
    o [libata adma] Add init code, fix CPB submission code
    o [libata ahci] finish ATAPI support
    o [libata adma] trivial whitespace cleanup
    o [libata dma] fix DMA mode config; add some more initialization code
    o [libata adma] add support for configuring PIO/DMA modes
    o [libata] turn on ATAPI support
    o [libata sata_promise] merge Tobias Lorenz' pdc20619 patch, part 2
    o [libata] small cleanups
    o [libata] remove unused execute-device-diagnostic reset method
    o [libata] add new driver ata_adma
    o [libata pdc2027x] update for upstream struct device conversion
    o [libata sata_promise] fix merge bugs
    o [libata] fix build breakage
    o [libata] fix SATA->PATA bridge detect compile breakage
    o [libata] fix printk warning

    John W. Linville:
    o libata: update ATA pass thru opcodes
    o libata: minor style changes in ata_scsi_pass_thru
    o libata: filter SET_FEATURES - XFER MODE from ATA pass thru
    o libata: sync SMART ioctls with ATA pass thru spec (T10/04-262r7)
    o libata: fix command queue leak when xlat_func fails
    o libata: SMART support via ATA pass-thru

    Tobias Lorenz:
    o [libata sata_promise] pdc20619 (PATA) support
    o libata-scsi: get-identity ioctl support

     \ /
      Last update: 2005-03-22 14:11    [W:0.044 / U:4.304 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site