lkml.org 
[lkml]   [2005]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.6.11-rc5
From
Date
On Fri, 2005-02-25 at 14:30 +0100, Mws wrote:
> hi,
>
> i also have problems with 2.6.11-rc5 and radeon:
>
> i am using a ATI Radeon X600 PciExpress.
>
> a) now the console framebuffer seems to bee working, thx benjamin :)
> b) when bootup seq ist completed and i want to start X (xorg-x11) with ati-drivers
> x is freezing - not your problem, but the console is not correctly restored :/ the only way
> out is to reset the machine :/
> 2.6.11-rc3 was running fine in this case

Hrm, the binary drivers ? oh well... some users had them freezing vs.
radeonfb before and not now. I don't know what they do and don't have
access to a machine with them (there are no ppc versions) so it will be
difficult to track. I suspect they completely reconfigure the chip and
don't restore it properly tho.

What exactly is happening. Does X launches at all ? When does it
freeze ? On X launch or when exiting it ? Have you tried disabling
dynamic clock tweaking ? (radeonfb.default_dynclk=-1 or 0 on the
cmdline, first one means "don't touch the registers", secoond one means
"disable dynamic clocks").

> i have attached my lspci -vv & lspci -tv output and following a small seq of the dmesg output
> when initializing the radeon fb.
>
> if i can provide/assit you with testing, i am available to do so, also if you need more information
> on my system.
>
> i am subscribed to lkml, but i would like to be included into cc seprately, thx.
>
>
> radeonfb_pci_register BEGIN
> ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> radeonfb (0000:05:00.0): Found 131072k of DDR 128 bits wide videoram
> radeonfb (0000:05:00.0): mapped 16384k videoram
> radeonfb: Found Intel x86 BIOS ROM Image
> radeonfb: Retreived PLL infos from BIOS
> radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=300.00 MHz
> radeonfb: PLL min 20000 max 40000
> 1 chips in connector info
> - chip 1 has 2 connectors
> * connector 0 of type 2 (CRT) : 2300
> * connector 1 of type 3 (DVI-I) : 3221
> Starting monitor auto detection...
> radeonfb: I2C (port 1) ... not found
> radeonfb: I2C (port 2) ... not found
> radeonfb: I2C (port 3) ... found CRT display
> radeonfb: I2C (port 4) ... not found
> radeonfb: I2C (port 2) ... not found
> radeonfb: I2C (port 4) ... not found
> radeonfb: I2C (port 3) ... found CRT display
> radeonfb: Monitor 1 type CRT found
> radeonfb: EDID probed
> radeonfb: Monitor 2 type no found
> Display is GTF capable
> hStart = 1344, hEnd = 1504, hTotal = 1728
> vStart = 1025, vEnd = 1028, vTotal = 1072
> h_total_disp = 0x9f00d7 hsync_strt_wid = 0x14054a
> v_total_disp = 0x3ff042f vsync_strt_wid = 0x30400
> pixclock = 6349
> freq = 15750
> freq = 15750, PLL min = 20000, PLL max = 40000
> ref_div = 12, ref_clk = 2700, output_freq = 31500
> ref_div = 12, ref_clk = 2700, output_freq = 31500
> post div = 0x1
> fb_div = 0x8c
> ppll_div_3 = 0x1008c
> Console: switching to colour frame buffer device 160x64
> radeonfb (0000:05:00.0): ATI Radeon [b
> radeonfb_pci_register END
>
--
Benjamin Herrenschmidt <benh@kernel.crashing.org>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.640 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site