This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Wed May 22 00:49:43 2024 Delivery-date: Thu, 24 Feb 2005 02:42:28 +0100 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261731AbVBXBkF (ORCPT ); Wed, 23 Feb 2005 20:40:05 -0500 Received: from smtp1.xs4all.be ([195.144.64.135]:49063 "EHLO smtp1.xs4all.be") by vger.kernel.org with ESMTP id S261717AbVBXBjk (ORCPT ); Wed, 23 Feb 2005 20:39:40 -0500 Received: from [192.168.2.2] (195-144-092-003.dyn.adsl.xs4all.be [195.144.92.3]) by smtp1.xs4all.be (8.12.10/8.12.10) with ESMTP id j1O1dWlY023674; Thu, 24 Feb 2005 02:39:32 +0100 Message-Id: <421D30DC.3070602@xs4all.be> Date: Thu, 24 Feb 2005 02:41:48 +0100 From: yves geunes User-Agent: Mozilla Thunderbird 0.9 (X11/20041124) X-Accept-Language: en-us, en Mime-Version: 1.0 To: mingo@redhat.com, linux-kernel@vger.kernel.org Subject: Oops: Unable to handle kernel paging request X-Enigmail-Version: 0.89.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org I run installed and updated sarge. I downloaded 2.6.10 from kernel.org. When I use apt-get under 2.4.27 everything is OK When I use apt-get under 2.6.10, I get a segfault I run the same combination (allthough a different configuration on a Pentium III (Coppermine) and on a Intel(R) Pentium(R) M processor 1.50GHz, but there it works fine The faulty system is configured for 686. I hope this is useful for you 0 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/hda1 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2993.709 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030900k/1047744k available (1703k kernel code, 16028k reserved, 768k data, 288k init, 130168k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5914.62 BogoMIPS (lpj=2957312) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 per-CPU timeslice cutoff: 2925.86 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04 Total of 2 processors activated (11894.78 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0: domain 0: span 03 groups: 01 02 CPU1: domain 0: span 03 groups: 02 01 checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 3684k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize libata version 1.10 loaded. ata_piix version 1.03 ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 18 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 18 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix elevator: using anticipatory as default io scheduler Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq ACPI wakeup devices: TANA P0P3 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 UAR2 SLPB ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3684KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 288k freed unix: disagrees about version of symbol sock_register unix: Unknown symbol sock_register unix: disagrees about version of symbol sock_wake_async unix: Unknown symbol sock_wake_async kobject_register failed for scsi_mod (-17) [] kobject_register+0x5b/0x60 [] mod_sysfs_setup+0x7d/0x100 [] load_module+0x99e/0xc70 [] sys_init_module+0x61/0x220 [] syscall_call+0x7/0xb SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back /dev/scsi/host1/bus0/target0/lun0: p1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HDS722580VLAT20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds NET: Registered protocol family 1 Adding 4883720k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda1, internal journal Real Time Clock Driver v1.12 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 md: md0 stopped. md: bind md: bind md: raid1 personality registered as nr 3 raid1: raid set md0 active with 2 out of 2 mirrors device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:01.0 to 64 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 20 e100: eth1: e100_probe: addr 0xfeafe000, irq 20, MAC addr 00:0C:F1:E3:F7:C5 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: BIOS handoff failed (104, 1010001) ehci_hcd 0000:00:1d.7: continuing after BIOS bug... PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xfebffc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i875 Chipset. agpgart: Maximum main memory to use for agp memory: 941M agpgart: AGP aperture is 64M @ 0xf8000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug hw_random hardware driver 1.0.0 loaded Evaluate _OSC Set fails. Status = 0x0005 pciehp: add_host_bridge: status 5 pciehp: Fails to gain control of native hot-plug eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 17 NET: Registered protocol family 10 Disabled Privacy Extensions on device c0335ae0(lo) IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present eth0: no IPv6 routers present Unable to handle kernel paging request at virtual address fa7c14c0 printing eip: f890610c *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: md5 ipv6 af_packet eepro100 hw_random shpchp pci_hotplug intel_agp agpgart evdev ehci_hcd usbcore e100 mii e1000 dm_mod raid1 ide_cd cdrom rtc unix ext3 jbd ide_generic via82cxxx trm290 triflex slc90e66 sis5513 siimage serverworks sc1200 rz1000 piix pdc202xx_old pdc202xx_new opti621 ns87415 hpt366 ide_disk hpt34x generic cy82c693 cs5530 cmd64x atiixp amd74xx alim15x3 aec62xx ide_core sd_mod CPU: 1 EIP: 0060:[] Not tainted VLI EFLAGS: 00010202 (2.6.10) EIP is at ext3_block_truncate_page+0x12c/0x330 [ext3] eax: 00000000 ebx: 00000000 ecx: 000002d0 edx: 00000b40 esi: 00000000 edi: fa7c14c0 ebp: c174f820 esp: f559bddc ds: 007b es: 007b ss: 0068 Process dpkg (pid: 4709, threadinfo=f559a000 task=f78d3520) Stack: f587d6a0 00001000 000000d2 00000000 00000000 f14314f4 00000b40 000004c0 f1bf0ddc 00000001 00000000 f587d6a0 00000000 f8906a7d f587d6a0 c174f820 f1431598 000004c0 00000000 f1431598 c174f820 f1431598 00000400 f1431430 Call Trace: [] ext3_truncate+0x14d/0x5e0 [ext3] [] ext3_truncate+0x0/0x5e0 [ext3] [] vmtruncate+0xbd/0x150 [] inode_setattr+0x176/0x190 [] ext3_setattr+0x13e/0x290 [ext3] [] notify_change+0x1b5/0x1f0 [] do_truncate+0x6c/0xb0 [] fget+0x49/0x60 [] sys_ftruncate64+0xcc/0x130 [] syscall_call+0x7/0xb Code: 85 db 75 6b a1 90 f4 3c c0 89 ef 8b 54 24 1c 8b 4c 24 18 29 c7 c1 ff 05 c1 e7 0c 31 c0 8d bc 3a 00 00 00 c0 c1 e9 02 8b 54 24 18 ab f6 c2 02 74 02 66 ab f6 c2 01 74 01 aa 8b 4c 24 14 31 db F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD 4 S root 1 0 0 76 0 - 375 - 02:57 ? 00:00:00 init [2] 1 S root 2 1 0 -40 0 - 0 migrat 02:57 ? 00:00:00 [migration/0] 1 S root 3 1 0 94 19 - 0 ksofti 02:57 ? 00:00:00 [ksoftirqd/0] 1 S root 4 1 0 -40 0 - 0 migrat 02:57 ? 00:00:00 [migration/1] 1 S root 5 1 0 94 19 - 0 ksofti 02:57 ? 00:00:00 [ksoftirqd/1] 1 S root 6 1 0 65 -10 - 0 worker 02:57 ? 00:00:00 [events/0] 1 S root 7 1 0 65 -10 - 0 worker 02:57 ? 00:00:00 [events/1] 1 S root 8 6 0 70 -10 - 0 worker 02:57 ? 00:00:00 [khelper] 1 S root 27 6 0 75 -10 - 0 worker 02:57 ? 00:00:00 [kacpid] 1 S root 110 6 0 65 -10 - 0 worker 02:57 ? 00:00:00 [kblockd/0] 1 S root 111 6 0 65 -10 - 0 worker 02:57 ? 00:00:00 [kblockd/1] 1 S root 157 6 0 80 0 - 0 pdflus 02:57 ? 00:00:00 [pdflush] 1 D root 158 6 0 75 0 - 0 start_ 02:57 ? 00:00:00 [pdflush] 1 S root 160 6 0 74 -10 - 0 worker 02:57 ? 00:00:00 [aio/0] 1 S root 159 1 0 85 0 - 0 kswapd 02:57 ? 00:00:00 [kswapd0] 1 S root 161 6 0 65 -10 - 0 worker 02:57 ? 00:00:00 [aio/1] 1 S root 747 1 0 85 0 - 0 serio_ 02:57 ? 00:00:00 [kseriod] 1 S root 772 6 0 65 -10 - 0 worker 02:57 ? 00:00:00 [ata/0] 1 S root 773 6 0 73 -10 - 0 worker 02:57 ? 00:00:00 [ata/1] 1 S root 775 1 0 85 0 - 0 375512 02:57 ? 00:00:00 [scsi_eh_0] 1 S root 776 1 0 85 0 - 0 375513 02:57 ? 00:00:00 [scsi_eh_1] 1 S root 791 1 0 75 0 - 0 - 02:57 ? 00:00:00 [kirqd] 1 S root 993 1 0 75 0 - 0 kjourn 02:57 ? 00:00:00 [kjournald] 1 S root 1769 1 0 75 0 - 0 md_thr 02:57 ? 00:00:00 [md0_raid1] 1 S root 1849 1 0 78 0 - 0 kjourn 02:57 ? 00:00:00 [kjournald] 1 S root 1850 1 0 75 0 - 0 kjourn 02:57 ? 00:00:00 [kjournald] 1 S root 1851 1 0 75 0 - 0 kjourn 02:57 ? 00:00:00 [kjournald] 1 D root 1852 1 0 75 0 - 0 journa 02:57 ? 00:00:00 [kjournald] 1 S root 1853 1 0 79 0 - 0 kjourn 02:57 ? 00:00:00 [kjournald] 1 S root 2215 1 0 79 0 - 0 hub_th 02:57 ? 00:00:00 [khubd] 1 S root 2630 1 0 85 0 - 0 - 02:57 ? 00:00:00 [shpchpd_event] 5 S root 3235 1 0 75 0 - 593 - 02:58 ? 00:00:00 dhclient -e -pf /var/run/dhclient.eth1.pid -lf /var/run/dhclient.eth1.leases eth1 5 S daemon 3243 1 0 75 0 - 404 - 02:58 ? 00:00:00 /sbin/portmap 5 D root 3585 1 0 76 0 - 564 start_ 02:58 ? 00:00:00 /sbin/syslogd 5 S root 3588 1 0 76 0 - 594 syslog 02:58 ? 00:00:00 /sbin/klogd 5 S root 3598 1 0 77 0 - 559 - 02:58 ? 00:00:00 /usr/sbin/inetd 5 S lp 3602 1 0 78 0 - 615 - 02:58 ? 00:00:00 /usr/sbin/lpd -s 4 D postfix 3696 1 0 76 0 - 918 start_ 02:58 ? 00:00:00 /usr/lib/postfix/master 4 D postfix 3739 3696 0 76 0 - 744 start_ 02:58 ? 00:00:00 pickup -l -t fifo -u -c 4 S postfix 3740 3696 0 76 0 - 752 - 02:58 ? 00:00:00 qmgr -l -t fifo -u -c 5 S root 3741 1 0 76 0 - 1388 - 02:58 ? 00:00:00 /usr/sbin/nmbd -D 5 S root 3743 1 0 78 0 - 1933 - 02:58 ? 00:00:00 /usr/sbin/smbd -D 1 S root 3749 3743 0 78 0 - 1933 pause 02:58 ? 00:00:00 /usr/sbin/smbd -D 5 S root 3750 1 0 76 0 - 867 - 02:58 ? 00:00:00 /usr/sbin/sshd 5 S root 3757 1 0 78 0 - 594 - 02:58 ? 00:00:00 /sbin/rpc.statd 5 S root 3760 1 0 76 0 - 425 - 02:58 ? 00:00:00 /sbin/mdadm -F -i /var/run/mdadm.pid -m root -f -s 5 S root 3773 1 0 78 0 - 1036 wait 02:58 ? 00:00:00 /usr/sbin/squid -D -sYC 4 D proxy 3775 3773 0 76 0 - 1762 start_ 02:58 ? 00:00:00 (squid) -D -sYC 0 S proxy 3777 3775 0 77 0 - 336 pipe_w 02:58 ? 00:00:00 (unlinkd) 1 S daemon 3780 1 0 79 0 - 420 - 02:58 ? 00:00:00 /usr/sbin/atd 5 S root 3783 1 0 76 0 - 440 - 02:58 ? 00:00:00 /usr/sbin/cron 5 S root 3795 3750 0 76 0 - 3613 - 02:58 ? 00:00:00 sshd: root@pts/0 5 S root 3797 1 0 76 0 - 2282 - 02:58 ? 00:00:00 /usr/bin/perl /usr/share/webmin/miniserv.pl /etc/webmin/miniserv.conf 5 S root 3816 1 0 76 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 5 S www-data 3827 3816 0 77 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 5 S www-data 3828 3816 0 81 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 5 S www-data 3829 3816 0 82 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 5 S www-data 3831 3816 0 81 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 5 S www-data 3832 3816 0 81 0 - 4641 - 02:58 ? 00:00:00 /usr/sbin/apache 4 S root 3835 1 0 76 0 - 376 322431 02:58 tty1 00:00:00 /sbin/getty 38400 tty1 4 S root 3839 1 0 77 0 - 376 322431 02:58 tty2 00:00:00 /sbin/getty 38400 tty2 4 S root 3840 1 0 76 0 - 374 322431 02:58 tty3 00:00:00 /sbin/getty 38400 tty3 4 S root 3841 1 0 77 0 - 374 322431 02:58 tty4 00:00:00 /sbin/getty 38400 tty4 4 S root 3842 1 0 76 0 - 374 322431 02:58 tty5 00:00:00 /sbin/getty 38400 tty5 4 S root 3843 1 0 77 0 - 374 322431 02:58 tty6 00:00:00 /sbin/getty 38400 tty6 4 S root 4171 3795 0 76 0 - 757 wait 02:58 pts/0 00:00:00 -bash 5 S root 4541 3750 0 75 0 - 3654 - 02:59 ? 00:00:00 sshd: root@pts/1 4 S root 4544 4541 0 77 0 - 753 wait 02:59 pts/1 00:00:00 -bash 4 S root 4546 4544 1 76 0 - 8297 wait 02:59 pts/1 00:00:04 dselect 4 S root 4561 4546 0 75 0 - 690 wait 03:01 pts/1 00:00:00 /bin/bash /usr/lib/dpkg/methods/apt/install /var/lib/dpkg apt apt 4 D root 4710 4561 0 81 0 - 5304 - 03:01 pts/1 00:00:00 /usr/bin/dpkg --admindir=/var/lib/dpkg --configure -a 5 S root 4711 3783 0 78 0 - 512 pipe_w 03:02 ? 00:00:00 /USR/SBIN/CRON 4 S logcheck 4712 4711 0 78 0 - 675 wait 03:02 ? 00:00:00 /bin/sh -c if [ -x /usr/sbin/logcheck ]; then nice -n10 /usr/sbin/logcheck; fi 0 S logcheck 4713 4712 0 86 10 - 698 wait 03:02 ? 00:00:00 /bin/bash /usr/sbin/logcheck 0 D logcheck 4717 4713 0 90 10 - 375 start_ 03:02 ? 00:00:00 lockfile-create --retry 1 /var/lock/logcheck 4 R root 4726 4171 0 78 0 - 625 - 03:03 pts/0 00:00:00 ps -edalf - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/