lkml.org 
[lkml]   [2005]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRE: Linux hangs during IDE initialization at boot for 30 sec
Date
From
Hi,

>-----Original Message-----
>From: linux-kernel-owner@vger.kernel.org
>[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Michael Brade
>Sent: Tuesday, February 01, 2005 3:58 AM
>To: linux-kernel@vger.kernel.org
>Subject: Linux hangs during IDE initialization at boot for 30 sec
>
[snip]
>
>I found additional lines in the log just before the line above:
>
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>
>But I only have ide0 and ide1. This problem persists even with
>2.6.11-rc2. For
>the last test I removed every option from the kernel that is
>not needed, but
>the problem stays. So I'm sure it's not because of ACPI or PNP
>or the like.
>
>With 2.6.11-rc2 I get in my syslog:
>
>Feb 1 11:30:02 newton kernel: ICH3M: chipset revision 2
>Feb 1 11:30:02 newton kernel: ICH3M: not 100%% native mode:
>will probe irqs
>later
>Feb 1 11:30:02 newton kernel: ide0: BM-DMA at 0xcfa0-0xcfa7, BIOS
>settings: hda:DMA, hdb:pio
>Feb 1 11:30:02 newton kernel: ide1: BM-DMA at 0xcfa8-0xcfaf, BIOS
>settings: hdc:DMA, hdd:pio
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide0...
>Feb 1 11:30:02 newton kernel: hda: HITACHI_DK23DA-30, ATA DISK drive
>Feb 1 11:30:02 newton kernel: DEV: registering device: ID = 'ide0'
>Feb 1 11:30:02 newton kernel: PM: Adding info for No Bus:ide0
>Feb 1 11:30:02 newton kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Feb 1 11:30:02 newton kernel: DEV: registering device: ID = '0.0'
>Feb 1 11:30:02 newton kernel: PM: Adding info for ide:0.0
>Feb 1 11:30:02 newton kernel: bus ide: add device 0.0
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide1...
>Feb 1 11:30:02 newton kernel: hdc: TOSHIBA DVD-ROM SD-R2212,
>ATAPI CD/DVD-ROM
>drive
>Feb 1 11:30:02 newton kernel: DEV: registering device: ID = 'ide1'
>Feb 1 11:30:02 newton kernel: PM: Adding info for No Bus:ide1
>Feb 1 11:30:02 newton kernel: ide1 at 0x170-0x177,0x376 on irq 15
>Feb 1 11:30:02 newton kernel: DEV: registering device: ID = '1.0'
>Feb 1 11:30:02 newton kernel: PM: Adding info for ide:1.0
>Feb 1 11:30:02 newton kernel: bus ide: add device 1.0
>Feb 1 11:30:02 newton kernel: bus pci: add driver PIIX_IDE
>Feb 1 11:30:02 newton kernel: bound device '0000:00:1f.1' to driver
>'PIIX_IDE'
>Feb 1 11:30:02 newton kernel: bus pci: add driver PCI_IDE
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide2...
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide3...
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide4...
>Feb 1 11:30:02 newton kernel: ide4: Wait for ready failed
>before probe !
>---> I guess the line above is the reason for the wait <---
>Feb 1 11:30:02 newton kernel: Probing IDE interface ide5...
>Feb 1 11:30:02 newton kernel: hda: max request size: 128KiB
>

Since you don't care about anything except ide0 & ide1, try to add
the following to the kernel's command line:
ide2=noprobe ide3=noprobe ide4=noprobe ide5=noprobe

Aleks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.170 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site