lkml.org 
[lkml]   [2005]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver
From
Date
Am Donnerstag, den 17.02.2005, 20:42 +0100 schrieb Vojtech Pavlik:
> On Thu, Feb 17, 2005 at 04:04:55PM +0100, Vojtech Pavlik wrote:
>
> > > drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489009]
> > > drivers/input/serio/i8042.c: 07 -> i8042 (parameter) [78489009]
> > > drivers/input/serio/i8042.c: fe <- i8042 (interrupt, aux, 12) [78489014]
> >
> > Ok, this is a regular 'I don't know what you mean' response from the
> > pad.
> >
> > > drivers/input/serio/i8042.c: d4 -> i8042 (command) [78489014]
> > > drivers/input/serio/i8042.c: f3 -> i8042 (parameter) [78489014]
> > > drivers/input/serio/i8042.c: fc <- i8042 (interrupt, aux, 12) [78489018]
> >
> > But this return code is _very_ unusual. 0xfc means 'basic assurance test
> > failure' and should be reported only as a response to the 0xff command.
>
> Kenan, can you check whether the 0xfc response is there even if you
> don't do the setres 7 command before this one?

Yes OK -- I will check. But as far as I know the 0xfe-answer from the
touchscreen means: "Please resend the last command". And 0xfc means:
"Error I didn't get that".

I also checked my original standalone-driver: Because of this behaviour
I always retried the last command 3 times if the responce from the
device was 0xfe or 0xfc.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.132 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site