lkml.org 
[lkml]   [2005]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch 1/2] USB Storage: Force starget->scsi_level in usb-storage scsiglue.c

From: Paul Walmsley <paul@booyaka.com>

When the usb-storage module forces sdev->scsi_level to SCSI_2, it should
also force starget->scsi_level to the same value. Otherwise, the SCSI
layer may attempt to issue SCSI-3 commands to the device, such as REPORT
LUNS, which it cannot handle. This can prevent the device from working
with Linux.

The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the
Oxford Semiconductor OXU921S chip, requires this patch to function
correctly on Linux. The enclosure reports a SCSI-3 SPC-2 command set
level, but does not correctly handle the REPORT LUNS SCSI command -
probably due to a bug in its firmware.

It seems likely that other USB storage enclosures with similar bugs will
also benefit from this patch.

Tony Lindgren <tony@atomide.com> collaborated in the development of this
patch.

Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/usb/storage/scsiglue.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- gregkh-2.6.orig/drivers/usb/storage/scsiglue.c
+++ gregkh-2.6/drivers/usb/storage/scsiglue.c
@@ -109,7 +109,7 @@ static int slave_configure(struct scsi_d
* data comes from.
*/
if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;

/* According to the technical support people at Genesys Logic,
* devices using their chips have problems transferring more than
@@ -162,7 +162,7 @@ static int slave_configure(struct scsi_d
* a Get-Max-LUN request, we won't lose much by setting the
* revision level down to 2. The only devices that would be
* affected are those with sparse LUNs. */
- sdev->scsi_level = SCSI_2;
+ sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;

/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-12-21 23:31    [W:0.048 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site