Messages in this thread | | | From | Bernhard Rosenkraenzer <> | Subject | sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board | Date | Wed, 14 Dec 2005 15:01:09 +0100 |
| |
On an ASRock 939Dual-SATA2 board, the sata_uli driver recognizes the onboard SATA controller (PCI ID 10b9:5289 rev 10, Subsystem 1849:5289), but fails to see an attached harddisk (the BIOS identifies the harddisk correctly, so a hardware failure is unlikely). sata_uli apparently sees _something_ is attached, but doesn't get further. dmesg says:
libata version 1.20 loaded. sata_uli 0000:00:12.1: version 0.5 GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 209 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE082 bmdma 0xD880 irq 209 ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 209 ata1: SATA link up 1.5 Gbps (SStatus 113) scsi0 : sata_uli ata2: SATA link down (SStatus 0) scsi1 : sata_uli
No disks are found, even though the link (on ata1) is detected.
Verified both with an x86 and an x86_64 kernel, and both 2.6.15-rc5 and 2.6.15-rc5-mm2.
Any ideas? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |