lkml.org 
[lkml]   [2005]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Date
    From
    Subject[PATCH 1/9] isdn4linux: Siemens Gigaset drivers - Kconfigs and Makefiles
    From: Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>

    This patch prepares the kernel build infrastructure for addition of the
    Gigaset ISDN drivers. It creates a Makefile and Kconfig file for the
    Gigaset driver and hooks them into those of the isdn4linux subsystem.
    It also adds a MAINTAINERS entry for the driver.

    This patch depends on patches 2 to 9 of the present set, as without the
    actual source files, activating the options added here will cause the
    kernel build to fail.

    Signed-off-by: Hansjoerg Lipp <hjlipp@web.de>
    Signed-off-by: Tilman Schmidt <tilman@imap.cc>
    ---

    MAINTAINERS | 9 +++++++++
    drivers/isdn/Makefile | 1 +
    drivers/isdn/gigaset/Kconfig | 42 ++++++++++++++++++++++++++++++++++++++++++
    drivers/isdn/gigaset/Makefile | 6 ++++++
    drivers/isdn/i4l/Kconfig | 1 +
    5 files changed, 59 insertions(+)

    --- linux-2.6.14/MAINTAINERS 2005-11-01 17:41:36.000000000 +0100
    +++ linux-2.6.14-gig/MAINTAINERS 2005-11-22 19:33:08.000000000 +0100
    @@ -976,6 +976,15 @@
    W: http://www.kernel.org/pub/linux/utils/net/hdlc/
    S: Maintained

    +GIGASET ISDN DRIVERS
    +P: Hansjoerg Lipp
    +M: hjlipp@web.de
    +P: Tilman Schmidt
    +M: tilman@imap.cc
    +L: gigaset307x-common@lists.sourceforge.net
    +W: http://gigaset307x.sourceforge.net/
    +S: Maintained
    +
    HARDWARE MONITORING
    P: Jean Delvare
    M: khali@linux-fr.org
    --- linux-2.6.14/drivers/isdn/Makefile 2005-07-16 20:04:00.000000000 +0200
    +++ linux-2.6.14-gig/drivers/isdn/Makefile 2005-11-13 17:54:13.000000000 +0100
    @@ -13,3 +13,4 @@
    obj-$(CONFIG_ISDN_DRV_LOOP) += isdnloop/
    obj-$(CONFIG_ISDN_DRV_ACT2000) += act2000/
    obj-$(CONFIG_HYSDN) += hysdn/
    +obj-$(CONFIG_ISDN_DRV_GIGASET) += gigaset/
    --- linux-2.6.14/drivers/isdn/i4l/Kconfig 2005-07-16 20:04:00.000000000 +0200
    +++ linux-2.6.14-gig/drivers/isdn/i4l/Kconfig 2005-11-13 17:53:47.000000000 +0100
    @@ -139,3 +139,4 @@

    endmenu

    +source "drivers/isdn/gigaset/Kconfig"
    --- linux-2.6.14/drivers/isdn/gigaset/Kconfig 1970-01-01 01:00:00.000000000 +0100
    +++ linux-2.6.14-gig/drivers/isdn/gigaset/Kconfig 2005-12-11 13:20:50.000000000 +0100
    @@ -0,0 +1,42 @@
    +menu "Siemens Gigaset"
    + depends on ISDN_I4L
    +
    +config ISDN_DRV_GIGASET
    + tristate "Siemens Gigaset support (isdn)"
    + depends on ISDN_I4L && m
    +# depends on ISDN_I4L && MODULES
    + help
    + Say m here if you have a Gigaset or Sinus isdn device.
    +
    +if ISDN_DRV_GIGASET!=n
    +
    +config GIGASET_BASE
    + tristate "Gigaset base station support"
    + depends on ISDN_DRV_GIGASET && USB
    + help
    + Say m here if you need to communicate with the base
    + directly via USB.
    +
    +config GIGASET_M105
    + tristate "Gigaset M105 support"
    + depends on ISDN_DRV_GIGASET && USB
    + help
    + Say m here if you need the driver for the Gigaset M105 device.
    +
    +config GIGASET_DEBUG
    + bool "Gigaset debugging"
    + help
    + This enables debugging code in the Gigaset drivers.
    + If in doubt, say yes.
    +
    +config GIGASET_UNDOCREQ
    + bool "Support for undocumented USB requests"
    + help
    + This enables support for USB requests we only know from
    + reverse engineering (currently M105 only). If you need
    + features like configuration mode of M105, say yes. If you
    + care about your device, say no.
    +
    +endif
    +
    +endmenu
    --- linux-2.6.14/drivers/isdn/gigaset/Makefile 1970-01-01 01:00:00.000000000 +0100
    +++ linux-2.6.14-gig/drivers/isdn/gigaset/Makefile 2005-12-11 13:20:54.000000000 +0100
    @@ -0,0 +1,6 @@
    +gigaset-y := common.o interface.o proc.o ev-layer.o i4l.o
    +usb_gigaset-y := usb-gigaset.o asyncdata.o
    +bas_gigaset-y := bas-gigaset.o isocdata.o
    +
    +obj-$(CONFIG_GIGASET_M105) += usb_gigaset.o gigaset.o
    +obj-$(CONFIG_GIGASET_BASE) += bas_gigaset.o gigaset.o
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/
    \
     
     \ /
      Last update: 2005-12-11 19:32    [W:0.024 / U:22.396 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site