lkml.org 
[lkml]   [2005]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.14-rt4: via DRM errors
Date
On Thursday, November 24, 2005 4:50 am, Thomas Hellström wrote:
> There is some info in the old precision insight documentation about
> the DRI infrastructure, (can't seem to find a link right now) But
> generally there is only one global lock and something called the
> drawable spinlock that is apparently not used anymore. The global
> lock is similar to a futex, with the exception that the kernel is
> called both to resolve contention and whenever a new context is about
> to take the lock, so that optional context switching can take place,
> and also if the client requests that some special action should take
> place after locking is done, like wait for dma ready or quiescent.
> The lock should be taken before writing to the hardware or before
> submitting DMA commands. If you want to be _sure_ that noone else
> uses the hardware (like you want to read a particular register or
> something), you have to take the lock and wait for DMA quiescent. For
> example, if you want to make sure the video scaler is idle so you can
> write to it, you first take the lock so that noone else writes to it
> or to the DMA queue, then you wait for the DMA queue to be empty or
> make sure there are no pending commands for the scaler, then you wait
> for the scaler to become idle.
>
> The lock value is easily manipulated from user space and resides in
> one of the shared memory areas. I guess this means that with the
> current drm security policy it should be regarded as an advisory lock
> between drm clients.

This is a nice little writeup, maybe it could go into the kernel's
Documentation/ directory? It would be nice to document how the lock
and signal handling interact as well.

> At one point I was about to implement a scheme for via with a number
> of similar locks, one for each independent function on the video
> chip, Like 2D, 3D, Mpeg decoder, Video scaler 1 and 2, so that they
> didn't have to wait for eachother. The global lock would then only
> be taken to make sure that no drawables were touched by the X server
> or other clients while the lock was held, which would be compatible
> with how the X server works today. Never got around to do that,
> however, but the mpeg decoders have a futex scheme to prevent clients
> stepping on eachother. With that it is possible to have multiple
> clients use the same hw decoder.

Sounds interesting, but that would be card specific, right? I mean, on
some cards the 2d and 3d locks would have to be the same because of
shared state or whatever, for example.

Jesse
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-11-24 16:34    [W:0.080 / U:1.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site