lkml.org 
[lkml]   [2005]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 2.6.14.2] Updated itmtouch kernel usb input driver (1/1)
From
Date
I have made a new release of the itmtouch driver, version 1.3.1. Basicly
just some parameters accesable for users to ease usability and
compatibility with X.

Attached is the patch against Linux 2.6.14.2.

For full source please download:
http://www.mivu.no/itmtouch/itmtouch-1.3.1.tar.bz2
http://www.mivu.no/itmtouch/itmtouch-1.3.1.tar.gz

I have testet the driver with my LG L1510SF touch screen and it works.
Any feedback is most welcome.

--
Best regards
Hans-Christian Egtvedt
--- /usr/src/linux-2.6.14.2/drivers/usb/input/itmtouch.c 2005-11-23 16:02:55.000000000 +0100
+++ itmtouch.c 2005-11-23 17:16:09.000000000 +0100
@@ -22,15 +22,27 @@
* driver. CC -- 2003/9/29
*
* History
- * 1.0 & 1.1 2003 (CC) vojtech@suse.cz
- * Original version for 2.4.x kernels
+ * 1.0 & 1.1 2003 (CC) vojtech@suse.cz
+ * - Original version for 2.4.x kernels
*
- * 1.2 02/03/2005 (HCE) hc@mivu.no
- * Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
- * Unfortunately no calibration support at this time.
+ * 1.2 02/03/2005 (HCE) hc@mivu.no
+ * - Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints.
+ * - Unfortunately no calibration support at this time.
*
* 1.2.1 09/03/2005 (HCE) hc@mivu.no
- * Code cleanup and adjusting syntax to start matching kernel standards
+ * - Code cleanup and adjusting syntax to start matching kernel standards
+ *
+ * 1.2.2 10/03/2005 (HCE) hc@mivu.no
+ * - Code cleanup
+ *
+ * 1.3 17/03/2005 (HCE) hc@mivu.no
+ * - Added parameter for swapping X- and Y-axis (swapxy).
+ * - General code cleanup
+ *
+ * 1.3.1 23/11/2005 (HCE) hc@mivu.no
+ * - Added parameter nosync for disabling input_sync. Panel is unusable
+ * without this, but people should be able to chose.
+ * - Added swapx and swapy to make it easier to adopt to X drivers
*
*****************************************************************************/

@@ -52,13 +64,15 @@

/* only an 8 byte buffer necessary for a single packet */
#define ITM_BUFSIZE 8
+/* support a maximum of 4 such touchscreens at once */
+#define MAXTOUCH 4
#define PATH_SIZE 64

#define USB_VENDOR_ID_ITMINC 0x0403
#define USB_PRODUCT_ID_TOUCHPANEL 0xf9e9

#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>"
-#define DRIVER_VERSION "v1.2.1"
+#define DRIVER_VERSION "v1.3.1"
#define DRIVER_DESC "USB ITM Inc Touch Panel Driver"
#define DRIVER_LICENSE "GPL"

@@ -66,14 +80,25 @@
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_LICENSE( DRIVER_LICENSE );

+static int swapxy, swapx, swapy, nosync;
+
+module_param(swapxy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(swapxy, "If set the X- and Y-axis are swapped.");
+module_param(swapx, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(swapx, "If set the X-axis is reversed in direction.");
+module_param(swapy, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(swapy, "If set the Y-axis is reversed in direction.");
+module_param(nosync, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(nosync, "If set input_sync is disabled.");
+
struct itmtouch_dev {
struct usb_device *usbdev; /* usb device */
struct input_dev inputdev; /* input device */
struct urb *readurb; /* urb */
char rbuf[ITM_BUFSIZE]; /* data */
int users;
- char name[128];
- char phys[64];
+ char name[128];
+ char phys[64];
};

static struct usb_device_id itmtouch_ids [] = {
@@ -83,17 +108,18 @@

static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
{
- struct itmtouch_dev * itmtouch = urb->context;
- unsigned char *data = urb->transfer_buffer;
+ struct itmtouch_dev *itmtouch = urb->context;
struct input_dev *dev = &itmtouch->inputdev;
+ unsigned int x, y, abs, button;
int retval;
+ u8 *data;

switch (urb->status) {
case 0:
/* success */
break;
case -ETIMEDOUT:
- /* this urb is timing out */
+ /* this urb is timing out, device unplugged? */
dbg("%s - urb timed out - was the device unplugged?",
__FUNCTION__);
return;
@@ -110,33 +136,65 @@
goto exit;
}

+ data = (u8 *)(urb->transfer_buffer);
+
+ if (swapx)
+ x = (data[1] & 0x1F) << 7 | (data[4] & 0x7F);
+ else
+ x = 4096 - ((data[1] & 0x1F) << 7 | (data[4] & 0x7F));
+
+ if (swapy)
+ y = 4096 - ((data[0] & 0x1F) << 7 | (data[3] & 0x7F));
+ else
+ y = (data[0] & 0x1F) << 7 | (data[3] & 0x7F);
+
+ abs = (data[2] & 0x1) << 7 | (data[5] & 0x7F);
+
+ /* Value is 0x80 when pressed and 0xA0 when released */
+ button = !(data[7] & 0x20);
+
input_regs(dev, regs);

- /* if pressure has been released, then don't report X/Y */
- if (data[7] & 0x20) {
- input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F));
- input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F));
+ if (button) {
+ if (swapxy) {
+ input_report_abs(dev, ABS_X, y);
+ input_report_abs(dev, ABS_Y, x);
+ }
+ else {
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ }
}

- input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F));
- input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20);
- input_sync(dev);
+ input_report_abs(dev, ABS_PRESSURE, abs);
+ input_report_key(dev, BTN_TOUCH, button);
+
+ /* Only use input_sync() if specified by user, this breaks the behavior
+ * of the panel. If you are experiencing double clicks, turn off sync. */
+ if (!nosync)
+ input_sync(dev);

exit:
- retval = usb_submit_urb (urb, GFP_ATOMIC);
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
printk(KERN_ERR "%s - usb_submit_urb failed with result: %d",
- __FUNCTION__, retval);
+ __FUNCTION__, retval);
}

static int itmtouch_open(struct input_dev *input)
{
struct itmtouch_dev *itmtouch = input->private;

+ if (itmtouch->users++)
+ return 0;
+
itmtouch->readurb->dev = itmtouch->usbdev;

if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL))
+ {
+ itmtouch->users--;
return -EIO;
+ }

return 0;
}
@@ -145,7 +203,8 @@
{
struct itmtouch_dev *itmtouch = input->private;

- usb_kill_urb(itmtouch->readurb);
+ if (!--itmtouch->users)
+ usb_kill_urb(itmtouch->readurb);
}

static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -158,13 +217,18 @@
unsigned int maxp;
char path[PATH_SIZE];

+ /* Setting interface */
interface = intf->cur_altsetting;
+
+ /* Setting endpoint */
endpoint = &interface->endpoint[0].desc;

- if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+ /* allocate memory space */
+ if (!(itmtouch = kmalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) {
err("%s - Out of memory.", __FUNCTION__);
return -ENOMEM;
}
+ memset(itmtouch, 0, sizeof(struct itmtouch_dev));

itmtouch->usbdev = udev;

@@ -180,7 +244,10 @@

itmtouch->inputdev.name = itmtouch->name;
itmtouch->inputdev.phys = itmtouch->phys;
- usb_to_input_id(udev, &itmtouch->inputdev.id);
+ itmtouch->inputdev.id.bustype = BUS_USB;
+ itmtouch->inputdev.id.vendor = udev->descriptor.idVendor;
+ itmtouch->inputdev.id.product = udev->descriptor.idProduct;
+ itmtouch->inputdev.id.version = udev->descriptor.bcdDevice;
itmtouch->inputdev.dev = &intf->dev;

if (!strlen(itmtouch->name))
@@ -199,8 +266,10 @@
pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));

- if (maxp > ITM_BUFSIZE)
+ if (maxp > ITM_BUFSIZE) {
+ printk(KERN_WARNING "itmtouch: WARNING: packet size > ITM_BUFSIZE\n");
maxp = ITM_BUFSIZE;
+ }

itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);

@@ -210,12 +279,18 @@
return -ENOMEM;
}

- usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
- maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
+ usb_fill_int_urb(itmtouch->readurb,
+ itmtouch->usbdev,
+ pipe,
+ itmtouch->rbuf,
+ maxp,
+ itmtouch_irq,
+ itmtouch,
+ endpoint->bInterval);

input_register_device(&itmtouch->inputdev);

- printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
+ printk(KERN_INFO "itmtouch: %s on %s\n", itmtouch->name, path);
usb_set_intfdata(intf, itmtouch);

return 0;
\
 
 \ /
  Last update: 2005-11-23 17:56    [W:0.034 / U:2.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site