Messages in this thread | | | From | José Luis Sánchez <> | Subject | Problem with 2.6.14 and up... | Date | Mon, 21 Nov 2005 17:24:47 +0100 |
| |
Hi,
From 2.6.14 I have a nasty problem with my SCSI devices. First, see my HW:
---------------------------------- 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26) 00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64) 00:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06) 00:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 06) 01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] (rev a1) ------------------------
I'm using the ncr53c8xx SCSI driver. When I run K3b, the program stalls a few minutes and this appears in the messages file:
sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray sr 0:0:2:0: Attached scsi CD-ROM sr1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:1:0: Attached scsi generic sg1 type 5 sr 0:0:2:0: Attached scsi generic sg2 type 5 0:0:5:0: Attached scsi generic sg3 type 1 sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6. sr 0:0:2:0: ABORT operation started. sr 0:0:2:0: ABORT operation timed-out. sr 0:0:2:0: DEVICE RESET operation started. sr 0:0:2:0: DEVICE RESET operation timed-out. sr 0:0:2:0: BUS RESET operation started. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. sr 0:0:2:0: BUS RESET operation complete. sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6. Device not ready. Make sure there is a disc in the drive. Device not ready. Make sure there is a disc in the drive. sr 0:0:2:0: phase change 2-1 12@01bbcf60 resid=6. sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2. sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2. sr 0:0:2:0: phase change 2-3 12@01bbcf60 resid=2. ....
I'm very sure what the SCSI card, the cabling and the devices are OK, why don't have any problem with 2.4.32 kernel.
Ideas?
José Luis - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |