lkml.org 
[lkml]   [2005]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] Hold the device's parent's lock during probe and remove
Greg:

This patch (as604) makes the driver core hold a device's parent's lock as
well as the device's lock during calls to the probe and remove methods in
a driver. This facility is needed by USB device drivers, owing to the
peculiar way USB devices work:

A device provides multiple interfaces, and drivers are bound
to interfaces rather than to devices;

Nevertheless a reset, reset-configuration, suspend, or resume
affects the entire device and requires the caller to hold the
lock for the device, not just a lock for one of the interfaces.

Since a USB driver's probe method is always called with the interface lock
held, the locking order rules (always lock parent before child) prevent
these methods from acquiring the device lock. The solution provided here
is to call all probe and remove methods, for all devices (not just USB),
with the parent lock already acquired.

Although currently only the USB subsystem requires these changes, people
have mentioned in prior discussion that the overhead of acquiring an extra
semaphore in all the prove/remove sequences is not overly large.

Up to now, the USB core has been using its own set of private semaphores.
A followup patch will remove them, relying entirely on the device
semaphores provided by the driver core.

The code paths affected by this patch are:

device_add and device_del: The USB core already holds the parent
lock, so no actual change is needed.

driver_register and driver_unregister: The driver core will now
lock both the parent and the device before probing or removing.

driver_bind and driver_unbind (in sysfs): These routines will
now lock both the parent and the device before binding or
unbinding.

bus_rescan_devices: The helper routine will lock the parent
before probing a device.

I have not tested this patch for conflicts with other subsystems. As far
as I can see, the only possibility of conflict would lie in the
bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it
would be good for this to get a lot of testing in -mm.

Alan Stern



Signed-off-by: Alan Stern <stern@rowland.harvard.edu>

---

Index: usb-2.6/drivers/base/dd.c
===================================================================
--- usb-2.6.orig/drivers/base/dd.c
+++ usb-2.6/drivers/base/dd.c
@@ -65,7 +65,8 @@ void device_bind_driver(struct device *
* This function returns 1 if a match is found, an error if one
* occurs (that is not -ENODEV or -ENXIO), and 0 otherwise.
*
- * This function must be called with @dev->sem held.
+ * This function must be called with @dev->sem held. When called
+ * for a USB interface, @dev->parent->sem must be held as well.
*/
int driver_probe_device(struct device_driver * drv, struct device * dev)
{
@@ -123,6 +124,8 @@ static int __device_attach(struct device
*
* Returns 1 if the device was bound to a driver;
* 0 if no matching device was found; error code otherwise.
+ *
+ * When called for a USB interface, @dev->parent->sem must be held.
*/
int device_attach(struct device * dev)
{
@@ -152,10 +155,14 @@ static int __driver_attach(struct device
* is an error.
*/

+ if (dev->parent) /* Needed for USB */
+ down(&dev->parent->sem);
down(&dev->sem);
if (!dev->driver)
driver_probe_device(drv, dev);
up(&dev->sem);
+ if (dev->parent)
+ up(&dev->parent->sem);

return 0;
}
@@ -181,6 +188,8 @@ void driver_attach(struct device_driver
* Manually detach device from driver.
*
* __device_release_driver() must be called with @dev->sem held.
+ * When called for a USB interface, @dev->parent->sem must be held
+ * as well.
*/

static void __device_release_driver(struct device * dev)
@@ -233,10 +242,14 @@ void driver_detach(struct device_driver
get_device(dev);
spin_unlock(&drv->klist_devices.k_lock);

+ if (dev->parent) /* Needed for USB */
+ down(&dev->parent->sem);
down(&dev->sem);
if (dev->driver == drv)
__device_release_driver(dev);
up(&dev->sem);
+ if (dev->parent)
+ up(&dev->parent->sem);
put_device(dev);
}
}
Index: usb-2.6/drivers/base/bus.c
===================================================================
--- usb-2.6.orig/drivers/base/bus.c
+++ usb-2.6/drivers/base/bus.c
@@ -152,7 +152,11 @@ static ssize_t driver_unbind(struct devi

dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
if (dev && dev->driver == drv) {
+ if (dev->parent) /* Needed for USB */
+ down(&dev->parent->sem);
device_release_driver(dev);
+ if (dev->parent)
+ up(&dev->parent->sem);
err = count;
}
put_device(dev);
@@ -175,9 +179,13 @@ static ssize_t driver_bind(struct device

dev = bus_find_device(bus, NULL, (void *)buf, driver_helper);
if (dev && dev->driver == NULL) {
+ if (dev->parent) /* Needed for USB */
+ down(&dev->parent->sem);
down(&dev->sem);
err = driver_probe_device(drv, dev);
up(&dev->sem);
+ if (dev->parent)
+ up(&dev->parent->sem);
}
put_device(dev);
put_bus(bus);
@@ -484,8 +492,13 @@ void bus_remove_driver(struct device_dri
/* Helper for bus_rescan_devices's iter */
static int bus_rescan_devices_helper(struct device *dev, void *data)
{
- if (!dev->driver)
+ if (!dev->driver) {
+ if (dev->parent) /* Needed for USB */
+ down(&dev->parent->sem);
device_attach(dev);
+ if (dev->parent)
+ up(&dev->parent->sem);
+ }
return 0;
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-11-17 22:56    [W:0.065 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site