Messages in this thread | | | Date | Wed, 16 Nov 2005 15:48:25 +0100 | From | Sander <> | Subject | Re: 2.6.14-mm1 libata pata_via |
| |
Alan Cox wrote (ao): > On Maw, 2005-11-08 at 13:13 +0100, Sander wrote: > > [42949377.130000] sdf:<3>ata5: command error, drv_stat 0x51 host_stat 0x64 > > [42949377.210000] ata5: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00 > > [42949377.210000] ata5: status=0x51 { DriveReady SeekComplete Error } > > Thats the important bit. It looks as if I got the timing clock loading > wrong for this chip. (My EPIA works nicely but all the info I need is in > your report).
I have one disk now, on an 80 wire cable. The system boots from the disk but can't find it afterwards:
[42949376.200000] pata_via 0000:00:11.1: version 0.1.1 [42949376.200000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 [42949376.200000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 5 [42949376.200000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14 [42949376.200000] ata5: port disabled. ignoring. [42949376.200000] scsi4 : pata_via [42949376.200000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15 [42949376.370000] ATA: abnormal status 0xFF on port 0x177 [42949376.370000] ata6: disabling port [42949376.370000] scsi5 : pata_via
(2.6.14-mm2, Epia MII 10000, Maxtor 250GB pata).
This is what 2.6.14-mm1 reports:
[42949378.560000] ata5: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xCC00 irq 14 [42949378.720000] ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f [42949378.720000] ata5: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48 [42949378.720000] ata5: dev 0 configured for UDMA/100 [42949378.720000] scsi4 : pata_via [42949378.720000] Vendor: ATA Model: Maxtor 6Y200P0 Rev: YAR4 [42949378.720000] Type: Direct-Access ANSI SCSI revision: 05 [42949378.720000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xCC08 irq 15 [42949378.890000] ATA: abnormal status 0xFF on port 0x177 [42949378.890000] ata6: disabling port [42949378.890000] scsi5 : pata_via [ ... ] [42949378.970000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) [42949378.970000] SCSI device sde: drive cache: write back [42949378.970000] SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) [42949378.970000] SCSI device sde: drive cache: write back [42949378.970000] sde: sde1 sde2 [42949378.990000] sd 4:0:0:0: Attached scsi disk sde
Btw, now I _can_ fdisk /dev/sde, while I could not do so with a slave disk and a 40 wire cable.
-- Humilis IT Services and Solutions http://www.humilis.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |