Messages in this thread |  | | | Date | Mon, 14 Nov 2005 21:05:29 +0000 (GMT) | | From | Chris Rankin <> | | Subject | [OOPS] Linux 2.6.14.2 and DVB USB |
| |
Hi,
My Linux 2.6.14.2-SMP kernel has just exploded on me, after I detached my USB2 DVB USB adapter. This is on a UP PIII 1GHz Coppermine machine. There was a storm of:
dvb-usb: bulk message failed: -19 (2/0)
messages between the disconnection and the eventual oops. Note also that the DVB device was attached to a USB2 hub.
Cheers, Chris
usb 5-5.4: new high speed USB device using ehci_hcd and address 21 dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-01.fw' to the 'Cypress FX2' dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. usb 5-5.4: USB disconnect, address 21 dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. usb 5-5.4: new high speed USB device using ehci_hcd and address 22 dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2). dvb-usb: MAC address: 00:0d:fe:03:77:33 dib3000: Found a DiBcom 3000P. DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)... dvb-usb: schedule remote query interval to 100 msecs. dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. usb 5-5.4: USB disconnect, address 22 dvb-usb: bulk message failed: -19 (2/0) dvb-usb: bulk message failed: -19 (2/0) dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully deinitialized and disconnected. dvb-usb: bulk message failed: -19 (2/0) dvb-usb: bulk message failed: -19 (2/0) dvb-usb: bulk message failed: -19 (2/0) ... dvb-usb: bulk message failed: -19 (2/0) dvb-usb: bulk message failed: -19 (2/0) dvb-usb: bulk message failed: -19 (2/0) Unable to handle kernel paging request at virtual address bd83b3c4 printing eip: bd83b3c4 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: dvb_usb_nova_t_usb2 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb dvb_core firmware_class dvb_pll snd_usb_audio snd_usb_lib snd_seq_oss snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul mga drm ipv6 floppy snd_pcm_oss snd_mixer_oss snd_seq binfmt_misc matroxfb_maven i2c_matroxfb i2c_algo_bit loop w83781d hwmon_vid i2c_isa eeprom ide_cd cdrom psmouse pcspkr button processor nfs nfsd exportfs lockd parport_pc parport ehci_hcd eth1394 ohci_hcd ohci1394 ieee1394 8139too mii emu10k1_gp gameport snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_ac97_bus snd_page_alloc snd_util_mem snd_hwdep snd soundcore i2c_i801 i2c_core uhci_hcd usbcore i8xx_tco intel_agp agpgart sunrpc ext3 jbd CPU: 0 EIP: 0060:[<bd83b3c4>] Not tainted VLI EFLAGS: 00010206 (2.6.14.2) EIP is at 0xbd83b3c4 eax: 3d373417 ebx: 3d373417 ecx: d498b0b8 edx: c0354000 esi: 00000200 edi: c1405de0 ebp: bd83b3c4 esp: c0354fb0 ds: 007b es: 007b ss: 0068 Process setiathome_4.02 (pid: 12144, threadinfo=c0354000 task=d67375a0) Stack: c0124de2 00000002 010b8f60 00000000 c0317cc0 c0354000 c0354fc8 c0354fc8 c034007b 00000001 c0317cc8 c034dee0 00000000 c0120ab0 0000000a d647efb0 00000046 0001a952 bf80d458 c010505f Call Trace: [<c0124de2>] run_timer_softirq+0xe2/0x1c0 [<c0120ab0>] __do_softirq+0x80/0x100 [<c010505f>] do_softirq+0x4f/0x60 ======================= [<c01038c4>] apic_timer_interrupt+0x1c/0x24 Code: Bad EIP value. <0>Kernel panic - not syncing: Fatal exception in interrupt
___________________________________________________________ To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |