[lkml]   [2005]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: Resume from swsusp stopped working with 2.6.14 and 2.6.15-rc1

    I experienced the same problem on an Dell Inspiron 4100.
    My dmesg output:

    Linux version 2.6.14 (root@mindy) (gcc version 4.0.3 20051023 (prerelease)
    (Debian 4.0.2-3)) #1 Sat Nov 12 23:01:16 CET 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000ffd3000 (usable)
    BIOS-e820: 000000000ffd3000 - 0000000010000000 (reserved)
    BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
    BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    255MB LOWMEM available.
    On node 0 totalpages: 65491
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 61395 pages, LIFO batch:31
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 DELL ) @ 0x000fde50
    ACPI: RSDT (v001 DELL CPi R 0x27d30510 ASL 0x00000061) @ 0x000fde64
    ACPI: FADT (v001 DELL CPi R 0x27d30510 ASL 0x00000061) @ 0x000fde90
    ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x808
    Allocating PCI resources starting at 20000000 (gap: 10000000:eeda0000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda6 resume=/dev/hda5
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 16384 bytes)
    Detected 863.799 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 256052k/261964k available (1989k kernel code, 5328k reserved, 550k
    data, 140k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 1728.84 BogoMIPS
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
    00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000
    00000000 00000000
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 512K
    CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
    00000000 00000000
    mtrr: v2.0 (20020519)
    CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz stepping 01
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: setting ELCR to 0200 (from 0800)
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
    ACPI: Subsystem revision 20050902
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
    PCI quirk: region 0880-08bf claimed by ICH4 GPIO
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Boot video device is 0000:01:00.0
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
    ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: Power Resource [PADA] (on)
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Bridge: 0000:00:01.0
    IO window: c000-cfff
    MEM window: fc000000-fdffffff
    PREFETCH window: e0000000-e7ffffff
    PCI: Bus 3, cardbus bridge: 0000:02:01.0
    IO window: 0000e000-0000e0ff
    IO window: 0000e400-0000e4ff
    PREFETCH window: 20000000-21ffffff
    MEM window: f4000000-f5ffffff
    PCI: Bus 7, cardbus bridge: 0000:02:01.1
    IO window: 0000e800-0000e8ff
    IO window: 00001000-000010ff
    PREFETCH window: 22000000-23ffffff
    MEM window: f6000000-f7ffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: e000-ffff
    MEM window: f4000000-fbffffff
    PREFETCH window: 20000000-24ffffff
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
    IRQ 11
    PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) ->
    IRQ 11
    Initializing Cryptographic API
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Battery Slot [BAT1] (battery absent)
    ACPI: Lid Switch [LID]
    ACPI: Power Button (CM) [PBTN]
    ACPI: Sleep Button (CM) [SBTN]
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: Thermal Zone [THM] (48 C)
    Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected an Intel 830M Chipset.
    agpgart: AGP aperture is 256M @ 0xd0000000
    [drm] Initialized drm 1.0.0 20040925
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ICH3M: IDE controller at PCI slot 0000:00:1f.1
    PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) ->
    IRQ 11
    ICH3M: chipset revision 1
    ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: IC25N020ATCS04-0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
    hda: cache flushes not supported
    hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
    hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    usbmon: debugfs is not available
    USB Universal Host Controller Interface driver v2.3
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
    IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    mice: PS/2 mouse device common for all mice
    NET: Registered protocol family 2
    input: AT Translated Set 2 keyboard on isa0060/serio0
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 4, 65536 bytes)
    TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Using IPI Shortcut mode
    Stopping tasks: ====<6>Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1,
    caps: 0x804793/0x0
    serio: Synaptics pass-through port at isa0060/serio1/input0
    input: SynPS/2 Synaptics TouchPad on isa0060/serio1

    stopping tasks failed (1 tasks remaining)
    Restarting tasks...<6> Strange, kseriod not stopped
    ACPI wakeup devices:
    ACPI: (supports S0 S1 S3 S4 S5)
    ReiserFS: hda6: found reiserfs format "3.6" with standard journal
    IBM TrackPoint firmware: 0x0b, buttons: 2/3
    input: TPPS/2 IBM TrackPoint on synaptics-pt/serio0
    ReiserFS: hda6: using ordered data mode
    ReiserFS: hda6: journal params: device hda6, size 8192, journal first block
    18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda6: checking transaction log (hda6)
    ReiserFS: hda6: replayed 30 transactions in 12 seconds
    ReiserFS: hda6: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Freeing unused kernel memory: 140k freed
    Adding 618460k swap on /dev/hda5. Priority:-1 extents:1 across:618460k

    hope that helps,
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-11-13 01:51    [W:0.031 / U:5.644 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site