lkml.org 
[lkml]   [2005]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 1/22] ppc64: Dynamic LPAR bugfix
From

01-hotplug-bugfix.patch

In the current 2.6.14-rc2-git6 kernel, performing a Dynamic LPAR Add
of a hotplug slot will crash the system, with the following (abbreviated)
stack trace:

cpu 0x3: Vector: 700 (Program Check) at [c000000053dff7f0]
pc: c0000000004f5974: .__alloc_bootmem+0x0/0xb0
lr: c0000000000258a0: .update_dn_pci_info+0x108/0x118
c0000000000257c8 .update_dn_pci_info+0x30/0x118 (unreliable)
c0000000000258fc .pci_dn_reconfig_notifier+0x4c/0x64
c000000000060754 .notifier_call_chain+0x68/0x9c

The root cause was that __init __alloc_bootmem() was called long after
boot had finished, resulting in a crash because this routine is undefined
after boot time. The patch below fixes this crash, and adds some docs to
clarify the code.

p.s. congrats to all for getting slashdotted on this yesterday!

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

Index: linux-2.6.14-rc2-git6/arch/ppc64/kernel/pci_dn.c
===================================================================
--- linux-2.6.14-rc2-git6.orig/arch/ppc64/kernel/pci_dn.c 2005-10-03 13:45:58.000000000 -0500
+++ linux-2.6.14-rc2-git6/arch/ppc64/kernel/pci_dn.c 2005-10-04 15:37:49.761245845 -0500
@@ -44,7 +44,7 @@
u32 *regs;
struct pci_dn *pdn;

- if (phb->is_dynamic)
+ if (mem_init_done)
pdn = kmalloc(sizeof(*pdn), GFP_KERNEL);
else
pdn = alloc_bootmem(sizeof(*pdn));
@@ -121,6 +121,14 @@
return NULL;
}

+/**
+ * pci_devs_phb_init_dynamic - setup pci devices under this PHB
+ * phb: pci-to-host bridge (top-level bridge connecting to cpu)
+ *
+ * This routine is called both during boot, (before the memory
+ * subsystem is set up, before kmalloc is valid) and during the
+ * dynamic lpar operation of adding a PHB to a running system.
+ */
void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb)
{
struct device_node * dn = (struct device_node *) phb->arch_data;
@@ -201,9 +209,14 @@
.notifier_call = pci_dn_reconfig_notifier,
};

-/*
- * Actually initialize the phbs.
- * The buswalk on this phb has not happened yet.
+/**
+ * pci_devs_phb_init - Initialize phbs and pci devs under them.
+ *
+ * This routine walks over all phb's (pci-host bridges) on the
+ * system, and sets up assorted pci-related structures
+ * (including pci info in the device node structs) for each
+ * pci device found underneath. This routine runs once,
+ * early in the boot sequence.
*/
void __init pci_devs_phb_init(void)
{
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-10-07 01:25    [W:0.244 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site