lkml.org 
[lkml]   [2005]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: 2.6.14-rt1 - xruns in a certain circumstance
From

> On 10/31/05, K.R. Foley <kr@cybsft.com> wrote:
>>
>> > Hi,
>> > I've been running 2.6.14-rt1 today. For the most part there seem to
>> > be no changes for me from 2.6.14-rc5-rt3. One place I saw xruns
>> > earlier is still there and I do not understand why this situation
>> > should be able to create xruns.
>> >
>> > I really think there is something to be learned from this problem.
>> > The way I see it What's going on with Myth is completely separate from
>> > what's going on with Jack, but Myth is causing xruns somehow.
>> >
>> > 1) I have Jack running. It is using sound card #2, my RME HDSP 9652. I
>> > can run for hours and see no xruns.
>> >
>> > 2) I start MythTV using sound card #1. Within MythTV there are
>> > essentially 3 types of operation:
>> >
>> > a) Basic menus
>> > b) Preview menu
>> > c) Full screen video watching
>> >
>> > What I'm seeing is that when using basic menus, or when watching
>> > videos I get no xruns. However, if I'm in the preview menu I get an
>> > xrun every few minutes. In the following snippet I started Jack and
>> > ran for about 20 minutes with no problems. I was using MythTV and
>> > watching videos. I spent very little time in the preview menu:
>> >
>> > 16:19:26.184 Server configuration saved to "/home/mark/.jackdrc".
>> > 16:19:26.185 Statistics reset.
>> > 16:19:26.411 Client activated.
>> > 16:19:26.412 Audio connection change.
>> > 16:19:26.415 Audio connection graph change.
>> > 16:20:34.918 Audio connection graph change.
>> > 16:20:34.977 Audio connection change.
>> > 16:20:37.842 Audio connection graph change.
>> >
>> > At about 4:45PM I exited the videos and left Myth sitting in a preview
>> > menu. In this mode Myth puts a small video screen in the bottom right
>> > corner where oyu get a low quality picture so you can see what the
>> > start of the program looks like. While sitting in this mode for about
>> > 45 minutes I got 10 xruns:
>> >
>> > 16:45:45.670 XRUN callback (1).
>> > **** alsa_pcm: xrun of at least 0.663 msecs
>> > 16:47:41.697 XRUN callback (2).
>> > **** alsa_pcm: xrun of at least 0.415 msecs
>> > subgraph starting at qjackctl-8363 timed out (subgraph_wait_fd=17,
>> > status = 0, state = Finished)
>> > 17:06:47.023 XRUN callback (3).
>> > **** alsa_pcm: xrun of at least 0.781 msecs
>> > **** alsa_pcm: xrun of at least 4.924 msecs
>> > 17:06:49.003 XRUN callback (1 skipped).
>> > subgraph starting at qjackctl-8363 timed out (subgraph_wait_fd=17,
>> > status = 0, state = Finished)
>> > 17:15:36.697 XRUN callback (5).
>> > **** alsa_pcm: xrun of at least 0.831 msecs
>> > **** alsa_pcm: xrun of at least 2.850 msecs
>> > 17:15:37.707 XRUN callback (1 skipped).
>> > 17:17:38.387 XRUN callback (7).
>> > **** alsa_pcm: xrun of at least 0.617 msecs
>> > subgraph starting at qjackctl-8363 timed out (subgraph_wait_fd=17,
>> > status = 0, state = Finished)
>> > 17:18:52.275 XRUN callback (8).
>> > **** alsa_pcm: xrun of at least 1.654 msecs
>> > 17:20:44.214 XRUN callback (9).
>> > **** alsa_pcm: xrun of at least 0.664 msecs
>> > 17:28:00.610 XRUN callback (10).
>> > **** alsa_pcm: xrun of at least 0.244 msecs
>> > subgraph starting at qjackctl-8363 timed out (subgraph_wait_fd=17,
>> > status = 0, state = Finished)
>> >
>> > At this point I exited the preview menu and went to a higher level
>> > menu and just let the machine sit in Myth for about 20 minutes. No
>> > xruns: At about 5:50PM I went back into the preview menu and got an
>> > xrun within 2 minutes:
>> >
>> > 17:51:59.548 XRUN callback (11).
>> > **** alsa_pcm: xrun of at least 1.156 msecs
>> > 17:52:32.464 XRUN callback (12).
>> > subgraph starting at qjackctl-8363 timed out (subgraph_wait_fd=17,
>> > status = 0, state = Finished)
>> > **** alsa_pcm: xrun of at least 1.326 msecs
>> >
>> > Note that on this machine I can browse the web, transfer files via
>> > the network, build kernels, do an emerge world, run cpuburn, etc., and
>> > I get no xruns. However, if I run MythTV in the preview menu I get
>> > them consistently.
>> >
>> > Also note that the MythTV server is actually located over a
>> > wireless connection. There is no wireless on my machine - the
>> > connection is between the router and the machines in another part of
>> > the house. I bring this up in case it indirectly bears upon the
>> > networking, etc.
>> >
>> > I look forward to hearing what you all think I should look at here.
>> >
>> > I have not yet turned on the preempt debugging stuff. I'll work on
>> > that after I hear back that I'm not wasting my time.
>> >
>> > Thanks,
>> > Mark
>> > -
>> > To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> > the body of a message to majordomo@vger.kernel.org
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> > Please read the FAQ at http://www.tux.org/lkml/
>> >
>> >
>>
>> Mark,
>>
>> If I am not mistaken, aren't you running the ivtv driver for your video
>> card (I think I have seen you on that list also)? Since that driver is
>> being developed outside the mainline kernel, isn't it likely that it
>> hasn't received many of the improvements that the rest of the kernel has
>> (latency and preemption wise)? Just a thought.
>> --
>>
>> kr
>
> Hi,
> No, the ivtv driver is running on a different machine. Not this
> one. When I was speaking of MythTV here it's a frontend only machine.
>
> True, I did try putting 2.6.14-rcX-rtY on my MythTV backend server
> but the ivtv driver wouldn't compile so I axed it and left that
> machine running a standard kernel. (Now running 2.6.14-gentoo)
>
> So, this is a frontend only problem.

Sorry for the speculation.

>
> I'm going to do as Lee and Ingo suggest, now that I have a test
> that seems to create xruns pretty qickly. Hopefully I'll capture
> something of interest. However I'm questioning exactly what the video
> problem would be since I don't create xruns when watching MythTV full
> screen. Only get them when watching in this preview window. That said
> it is an ATI PCI-Express card but since it's 2.6.14 there is no ATI
> driver support. My kernel is currently trying to load fglrx (the ATI
> driver) and failing since it doesn't support this kernel. I'll clean
> up the video driver setup and retest.
>
> Anyway, we'll see later today.
>
> Thanks for all the responses.
>
> Cheers,
> Mark



--
K.R. Foley
kr@cybsft.com


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-10-31 16:38    [W:0.079 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site