lkml.org 
[lkml]   [2005]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 7/17] NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation()
NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation(), a function to
extend the allocation of an attributes. Optionally, the data size,
but not the initialized size can be extended, too.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

---

fs/ntfs/ChangeLog | 3
fs/ntfs/attrib.c | 634 +++++++++++++++++++++++++++++++++++++++++++++++++++++
fs/ntfs/attrib.h | 3
3 files changed, 640 insertions(+), 0 deletions(-)

applies-to: a123e9bb2c7d17aade84b1d1cc2decafdeace121
2d86829b846d1447a6ab5af4060fc9f301521317
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
index 045beda..6c5bdfb 100644
--- a/fs/ntfs/ChangeLog
+++ b/fs/ntfs/ChangeLog
@@ -47,6 +47,9 @@ ToDo/Notes:
which is zero for a resident attribute but should no longer be zero
once the attribute is non-resident as it then has real clusters
allocated.
+ - Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation(), a function to
+ extend the allocation of an attributes. Optionally, the data size,
+ but not the initialized size can be extended, too.

2.1.24 - Lots of bug fixes and support more clean journal states.

diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c
index 8821e2d..bc25e88 100644
--- a/fs/ntfs/attrib.c
+++ b/fs/ntfs/attrib.c
@@ -1835,6 +1835,640 @@ page_err_out:
}

/**
+ * ntfs_attr_extend_allocation - extend the allocated space of an attribute
+ * @ni: ntfs inode of the attribute whose allocation to extend
+ * @new_alloc_size: new size in bytes to which to extend the allocation to
+ * @new_data_size: new size in bytes to which to extend the data to
+ * @data_start: beginning of region which is required to be non-sparse
+ *
+ * Extend the allocated space of an attribute described by the ntfs inode @ni
+ * to @new_alloc_size bytes. If @data_start is -1, the whole extension may be
+ * implemented as a hole in the file (as long as both the volume and the ntfs
+ * inode @ni have sparse support enabled). If @data_start is >= 0, then the
+ * region between the old allocated size and @data_start - 1 may be made sparse
+ * but the regions between @data_start and @new_alloc_size must be backed by
+ * actual clusters.
+ *
+ * If @new_data_size is -1, it is ignored. If it is >= 0, then the data size
+ * of the attribute is extended to @new_data_size. Note that the i_size of the
+ * vfs inode is not updated. Only the data size in the base attribute record
+ * is updated. The caller has to update i_size separately if this is required.
+ * WARNING: It is a BUG() for @new_data_size to be smaller than the old data
+ * size as well as for @new_data_size to be greater than @new_alloc_size.
+ *
+ * For resident attributes this involves resizing the attribute record and if
+ * necessary moving it and/or other attributes into extent mft records and/or
+ * converting the attribute to a non-resident attribute which in turn involves
+ * extending the allocation of a non-resident attribute as described below.
+ *
+ * For non-resident attributes this involves allocating clusters in the data
+ * zone on the volume (except for regions that are being made sparse) and
+ * extending the run list to describe the allocated clusters as well as
+ * updating the mapping pairs array of the attribute. This in turn involves
+ * resizing the attribute record and if necessary moving it and/or other
+ * attributes into extent mft records and/or splitting the attribute record
+ * into multiple extent attribute records.
+ *
+ * Also, the attribute list attribute is updated if present and in some of the
+ * above cases (the ones where extent mft records/attributes come into play),
+ * an attribute list attribute is created if not already present.
+ *
+ * Return the new allocated size on success and -errno on error. In the case
+ * that an error is encountered but a partial extension at least up to
+ * @data_start (if present) is possible, the allocation is partially extended
+ * and this is returned. This means the caller must check the returned size to
+ * determine if the extension was partial. If @data_start is -1 then partial
+ * allocations are not performed.
+ *
+ * WARNING: Do not call ntfs_attr_extend_allocation() for $MFT/$DATA.
+ *
+ * Locking: This function takes the runlist lock of @ni for writing as well as
+ * locking the mft record of the base ntfs inode. These locks are maintained
+ * throughout execution of the function. These locks are required so that the
+ * attribute can be resized safely and so that it can for example be converted
+ * from resident to non-resident safely.
+ *
+ * TODO: At present attribute list attribute handling is not implemented.
+ *
+ * TODO: At present it is not safe to call this function for anything other
+ * than the $DATA attribute(s) of an uncompressed and unencrypted file.
+ */
+s64 ntfs_attr_extend_allocation(ntfs_inode *ni, s64 new_alloc_size,
+ const s64 new_data_size, const s64 data_start)
+{
+ VCN vcn;
+ s64 ll, allocated_size, start = data_start;
+ struct inode *vi = VFS_I(ni);
+ ntfs_volume *vol = ni->vol;
+ ntfs_inode *base_ni;
+ MFT_RECORD *m;
+ ATTR_RECORD *a;
+ ntfs_attr_search_ctx *ctx;
+ runlist_element *rl, *rl2;
+ unsigned long flags;
+ int err, mp_size;
+ u32 attr_len = 0; /* Silence stupid gcc warning. */
+ BOOL mp_rebuilt;
+
+#ifdef NTFS_DEBUG
+ read_lock_irqsave(&ni->size_lock, flags);
+ allocated_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ ntfs_debug("Entering for i_ino 0x%lx, attribute type 0x%x, "
+ "old_allocated_size 0x%llx, "
+ "new_allocated_size 0x%llx, new_data_size 0x%llx, "
+ "data_start 0x%llx.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type),
+ (unsigned long long)allocated_size,
+ (unsigned long long)new_alloc_size,
+ (unsigned long long)new_data_size,
+ (unsigned long long)start);
+#endif
+retry_extend:
+ /*
+ * For non-resident attributes, @start and @new_size need to be aligned
+ * to cluster boundaries for allocation purposes.
+ */
+ if (NInoNonResident(ni)) {
+ if (start > 0)
+ start &= ~(s64)vol->cluster_size_mask;
+ new_alloc_size = (new_alloc_size + vol->cluster_size - 1) &
+ ~(s64)vol->cluster_size_mask;
+ }
+ BUG_ON(new_data_size >= 0 && new_data_size > new_alloc_size);
+ /* Check if new size is allowed in $AttrDef. */
+ err = ntfs_attr_size_bounds_check(vol, ni->type, new_alloc_size);
+ if (unlikely(err)) {
+ /* Only emit errors when the write will fail completely. */
+ read_lock_irqsave(&ni->size_lock, flags);
+ allocated_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (start < 0 || start >= allocated_size) {
+ if (err == -ERANGE) {
+ ntfs_error(vol->sb, "Cannot extend allocation "
+ "of inode 0x%lx, attribute "
+ "type 0x%x, because the new "
+ "allocation would exceed the "
+ "maximum allowed size for "
+ "this attribute type.",
+ vi->i_ino, (unsigned)
+ le32_to_cpu(ni->type));
+ } else {
+ ntfs_error(vol->sb, "Cannot extend allocation "
+ "of inode 0x%lx, attribute "
+ "type 0x%x, because this "
+ "attribute type is not "
+ "defined on the NTFS volume. "
+ "Possible corruption! You "
+ "should run chkdsk!",
+ vi->i_ino, (unsigned)
+ le32_to_cpu(ni->type));
+ }
+ }
+ /* Translate error code to be POSIX conformant for write(2). */
+ if (err == -ERANGE)
+ err = -EFBIG;
+ else
+ err = -EIO;
+ return err;
+ }
+ if (!NInoAttr(ni))
+ base_ni = ni;
+ else
+ base_ni = ni->ext.base_ntfs_ino;
+ /*
+ * We will be modifying both the runlist (if non-resident) and the mft
+ * record so lock them both down.
+ */
+ down_write(&ni->runlist.lock);
+ m = map_mft_record(base_ni);
+ if (IS_ERR(m)) {
+ err = PTR_ERR(m);
+ m = NULL;
+ ctx = NULL;
+ goto err_out;
+ }
+ ctx = ntfs_attr_get_search_ctx(base_ni, m);
+ if (unlikely(!ctx)) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ read_lock_irqsave(&ni->size_lock, flags);
+ allocated_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ /*
+ * If non-resident, seek to the last extent. If resident, there is
+ * only one extent, so seek to that.
+ */
+ vcn = NInoNonResident(ni) ? allocated_size >> vol->cluster_size_bits :
+ 0;
+ /*
+ * Abort if someone did the work whilst we waited for the locks. If we
+ * just converted the attribute from resident to non-resident it is
+ * likely that exactly this has happened already. We cannot quite
+ * abort if we need to update the data size.
+ */
+ if (unlikely(new_alloc_size <= allocated_size)) {
+ ntfs_debug("Allocated size already exceeds requested size.");
+ new_alloc_size = allocated_size;
+ if (new_data_size < 0)
+ goto done;
+ /*
+ * We want the first attribute extent so that we can update the
+ * data size.
+ */
+ vcn = 0;
+ }
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, vcn, NULL, 0, ctx);
+ if (unlikely(err)) {
+ if (err == -ENOENT)
+ err = -EIO;
+ goto err_out;
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ /* Use goto to reduce indentation. */
+ if (a->non_resident)
+ goto do_non_resident_extend;
+ BUG_ON(NInoNonResident(ni));
+ /* The total length of the attribute value. */
+ attr_len = le32_to_cpu(a->data.resident.value_length);
+ /*
+ * Extend the attribute record to be able to store the new attribute
+ * size. ntfs_attr_record_resize() will not do anything if the size is
+ * not changing.
+ */
+ if (new_alloc_size < vol->mft_record_size &&
+ !ntfs_attr_record_resize(m, a,
+ le16_to_cpu(a->data.resident.value_offset) +
+ new_alloc_size)) {
+ /* The resize succeeded! */
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->allocated_size = le32_to_cpu(a->length) -
+ le16_to_cpu(a->data.resident.value_offset);
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ if (new_data_size >= 0) {
+ BUG_ON(new_data_size < attr_len);
+ a->data.resident.value_length =
+ cpu_to_le32((u32)new_data_size);
+ }
+ goto flush_done;
+ }
+ /*
+ * We have to drop all the locks so we can call
+ * ntfs_attr_make_non_resident(). This could be optimised by try-
+ * locking the first page cache page and only if that fails dropping
+ * the locks, locking the page, and redoing all the locking and
+ * lookups. While this would be a huge optimisation, it is not worth
+ * it as this is definitely a slow code path.
+ */
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ up_write(&ni->runlist.lock);
+ /*
+ * Not enough space in the mft record, try to make the attribute
+ * non-resident and if successful restart the extension process.
+ */
+ err = ntfs_attr_make_non_resident(ni, attr_len);
+ if (likely(!err))
+ goto retry_extend;
+ /*
+ * Could not make non-resident. If this is due to this not being
+ * permitted for this attribute type or there not being enough space,
+ * try to make other attributes non-resident. Otherwise fail.
+ */
+ if (unlikely(err != -EPERM && err != -ENOSPC)) {
+ /* Only emit errors when the write will fail completely. */
+ read_lock_irqsave(&ni->size_lock, flags);
+ allocated_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation of "
+ "inode 0x%lx, attribute type 0x%x, "
+ "because the conversion from resident "
+ "to non-resident attribute failed "
+ "with error code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ if (err != -ENOMEM)
+ err = -EIO;
+ goto conv_err_out;
+ }
+ /* TODO: Not implemented from here, abort. */
+ read_lock_irqsave(&ni->size_lock, flags);
+ allocated_size = ni->allocated_size;
+ read_unlock_irqrestore(&ni->size_lock, flags);
+ if (start < 0 || start >= allocated_size) {
+ if (err == -ENOSPC)
+ ntfs_error(vol->sb, "Not enough space in the mft "
+ "record/on disk for the non-resident "
+ "attribute value. This case is not "
+ "implemented yet.");
+ else /* if (err == -EPERM) */
+ ntfs_error(vol->sb, "This attribute type may not be "
+ "non-resident. This case is not "
+ "implemented yet.");
+ }
+ err = -EOPNOTSUPP;
+ goto conv_err_out;
+#if 0
+ // TODO: Attempt to make other attributes non-resident.
+ if (!err)
+ goto do_resident_extend;
+ /*
+ * Both the attribute list attribute and the standard information
+ * attribute must remain in the base inode. Thus, if this is one of
+ * these attributes, we have to try to move other attributes out into
+ * extent mft records instead.
+ */
+ if (ni->type == AT_ATTRIBUTE_LIST ||
+ ni->type == AT_STANDARD_INFORMATION) {
+ // TODO: Attempt to move other attributes into extent mft
+ // records.
+ err = -EOPNOTSUPP;
+ if (!err)
+ goto do_resident_extend;
+ goto err_out;
+ }
+ // TODO: Attempt to move this attribute to an extent mft record, but
+ // only if it is not already the only attribute in an mft record in
+ // which case there would be nothing to gain.
+ err = -EOPNOTSUPP;
+ if (!err)
+ goto do_resident_extend;
+ /* There is nothing we can do to make enough space. )-: */
+ goto err_out;
+#endif
+do_non_resident_extend:
+ BUG_ON(!NInoNonResident(ni));
+ if (new_alloc_size == allocated_size) {
+ BUG_ON(vcn);
+ goto alloc_done;
+ }
+ /*
+ * If the data starts after the end of the old allocation, this is a
+ * $DATA attribute and sparse attributes are enabled on the volume and
+ * for this inode, then create a sparse region between the old
+ * allocated size and the start of the data. Otherwise simply proceed
+ * with filling the whole space between the old allocated size and the
+ * new allocated size with clusters.
+ */
+ if ((start >= 0 && start <= allocated_size) || ni->type != AT_DATA ||
+ !NVolSparseEnabled(vol) || NInoSparseDisabled(ni))
+ goto skip_sparse;
+ // TODO: This is not implemented yet. We just fill in with real
+ // clusters for now...
+ ntfs_debug("Inserting holes is not-implemented yet. Falling back to "
+ "allocating real clusters instead.");
+skip_sparse:
+ rl = ni->runlist.rl;
+ if (likely(rl)) {
+ /* Seek to the end of the runlist. */
+ while (rl->length)
+ rl++;
+ }
+ /* If this attribute extent is not mapped, map it now. */
+ if (unlikely(!rl || rl->lcn == LCN_RL_NOT_MAPPED ||
+ (rl->lcn == LCN_ENOENT && rl > ni->runlist.rl &&
+ (rl-1)->lcn == LCN_RL_NOT_MAPPED))) {
+ if (!rl && !allocated_size)
+ goto first_alloc;
+ rl = ntfs_mapping_pairs_decompress(vol, a, ni->runlist.rl);
+ if (IS_ERR(rl)) {
+ err = PTR_ERR(rl);
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation "
+ "of inode 0x%lx, attribute "
+ "type 0x%x, because the "
+ "mapping of a runlist "
+ "fragment failed with error "
+ "code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type),
+ err);
+ if (err != -ENOMEM)
+ err = -EIO;
+ goto err_out;
+ }
+ ni->runlist.rl = rl;
+ /* Seek to the end of the runlist. */
+ while (rl->length)
+ rl++;
+ }
+ /*
+ * We now know the runlist of the last extent is mapped and @rl is at
+ * the end of the runlist. We want to begin allocating clusters
+ * starting at the last allocated cluster to reduce fragmentation. If
+ * there are no valid LCNs in the attribute we let the cluster
+ * allocator choose the starting cluster.
+ */
+ /* If the last LCN is a hole or simillar seek back to last real LCN. */
+ while (rl->lcn < 0 && rl > ni->runlist.rl)
+ rl--;
+first_alloc:
+ // FIXME: Need to implement partial allocations so at least part of the
+ // write can be performed when start >= 0. (Needed for POSIX write(2)
+ // conformance.)
+ rl2 = ntfs_cluster_alloc(vol, allocated_size >> vol->cluster_size_bits,
+ (new_alloc_size - allocated_size) >>
+ vol->cluster_size_bits, (rl && (rl->lcn >= 0)) ?
+ rl->lcn + rl->length : -1, DATA_ZONE, TRUE);
+ if (IS_ERR(rl2)) {
+ err = PTR_ERR(rl2);
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation of "
+ "inode 0x%lx, attribute type 0x%x, "
+ "because the allocation of clusters "
+ "failed with error code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ if (err != -ENOMEM && err != -ENOSPC)
+ err = -EIO;
+ goto err_out;
+ }
+ rl = ntfs_runlists_merge(ni->runlist.rl, rl2);
+ if (IS_ERR(rl)) {
+ err = PTR_ERR(rl);
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation of "
+ "inode 0x%lx, attribute type 0x%x, "
+ "because the runlist merge failed "
+ "with error code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ if (err != -ENOMEM)
+ err = -EIO;
+ if (ntfs_cluster_free_from_rl(vol, rl2)) {
+ ntfs_error(vol->sb, "Failed to release allocated "
+ "cluster(s) in error code path. Run "
+ "chkdsk to recover the lost "
+ "cluster(s).");
+ NVolSetErrors(vol);
+ }
+ ntfs_free(rl2);
+ goto err_out;
+ }
+ ni->runlist.rl = rl;
+ ntfs_debug("Allocated 0x%llx clusters.", (long long)(new_alloc_size -
+ allocated_size) >> vol->cluster_size_bits);
+ /* Find the runlist element with which the attribute extent starts. */
+ ll = sle64_to_cpu(a->data.non_resident.lowest_vcn);
+ rl2 = ntfs_rl_find_vcn_nolock(rl, ll);
+ BUG_ON(!rl2);
+ BUG_ON(!rl2->length);
+ BUG_ON(rl2->lcn < LCN_HOLE);
+ mp_rebuilt = FALSE;
+ /* Get the size for the new mapping pairs array for this extent. */
+ mp_size = ntfs_get_size_for_mapping_pairs(vol, rl2, ll, -1);
+ if (unlikely(mp_size <= 0)) {
+ err = mp_size;
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation of "
+ "inode 0x%lx, attribute type 0x%x, "
+ "because determining the size for the "
+ "mapping pairs failed with error code "
+ "%i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ err = -EIO;
+ goto undo_alloc;
+ }
+ /* Extend the attribute record to fit the bigger mapping pairs array. */
+ attr_len = le32_to_cpu(a->length);
+ err = ntfs_attr_record_resize(m, a, mp_size +
+ le16_to_cpu(a->data.non_resident.mapping_pairs_offset));
+ if (unlikely(err)) {
+ BUG_ON(err != -ENOSPC);
+ // TODO: Deal with this by moving this extent to a new mft
+ // record or by starting a new extent in a new mft record,
+ // possibly by extending this extent partially and filling it
+ // and creating a new extent for the remainder, or by making
+ // other attributes non-resident and/or by moving other
+ // attributes out of this mft record.
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Not enough space in the mft "
+ "record for the extended attribute "
+ "record. This case is not "
+ "implemented yet.");
+ err = -EOPNOTSUPP;
+ goto undo_alloc;
+ }
+ mp_rebuilt = TRUE;
+ /* Generate the mapping pairs array directly into the attr record. */
+ err = ntfs_mapping_pairs_build(vol, (u8*)a +
+ le16_to_cpu(a->data.non_resident.mapping_pairs_offset),
+ mp_size, rl2, ll, -1, NULL);
+ if (unlikely(err)) {
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot extend allocation of "
+ "inode 0x%lx, attribute type 0x%x, "
+ "because building the mapping pairs "
+ "failed with error code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ err = -EIO;
+ goto undo_alloc;
+ }
+ /* Update the highest_vcn. */
+ a->data.non_resident.highest_vcn = cpu_to_sle64((new_alloc_size >>
+ vol->cluster_size_bits) - 1);
+ /*
+ * We now have extended the allocated size of the attribute. Reflect
+ * this in the ntfs_inode structure and the attribute record.
+ */
+ if (a->data.non_resident.lowest_vcn) {
+ /*
+ * We are not in the first attribute extent, switch to it, but
+ * first ensure the changes will make it to disk later.
+ */
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ ntfs_attr_reinit_search_ctx(ctx);
+ err = ntfs_attr_lookup(ni->type, ni->name, ni->name_len,
+ CASE_SENSITIVE, 0, NULL, 0, ctx);
+ if (unlikely(err))
+ goto restore_undo_alloc;
+ /* @m is not used any more so no need to set it. */
+ a = ctx->attr;
+ }
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->allocated_size = new_alloc_size;
+ a->data.non_resident.allocated_size = cpu_to_sle64(new_alloc_size);
+ /*
+ * FIXME: This would fail if @ni is a directory, $MFT, or an index,
+ * since those can have sparse/compressed set. For example can be
+ * set compressed even though it is not compressed itself and in that
+ * case the bit means that files are to be created compressed in the
+ * directory... At present this is ok as this code is only called for
+ * regular files, and only for their $DATA attribute(s).
+ * FIXME: The calculation is wrong if we created a hole above. For now
+ * it does not matter as we never create holes.
+ */
+ if (NInoSparse(ni) || NInoCompressed(ni)) {
+ ni->itype.compressed.size += new_alloc_size - allocated_size;
+ a->data.non_resident.compressed_size =
+ cpu_to_sle64(ni->itype.compressed.size);
+ vi->i_blocks = ni->itype.compressed.size >> 9;
+ } else
+ vi->i_blocks = new_alloc_size >> 9;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+alloc_done:
+ if (new_data_size >= 0) {
+ BUG_ON(new_data_size <
+ sle64_to_cpu(a->data.non_resident.data_size));
+ a->data.non_resident.data_size = cpu_to_sle64(new_data_size);
+ }
+flush_done:
+ /* Ensure the changes make it to disk. */
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+done:
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ up_write(&ni->runlist.lock);
+ ntfs_debug("Done, new_allocated_size 0x%llx.",
+ (unsigned long long)new_alloc_size);
+ return new_alloc_size;
+restore_undo_alloc:
+ if (start < 0 || start >= allocated_size)
+ ntfs_error(vol->sb, "Cannot complete extension of allocation "
+ "of inode 0x%lx, attribute type 0x%x, because "
+ "lookup of first attribute extent failed with "
+ "error code %i.", vi->i_ino,
+ (unsigned)le32_to_cpu(ni->type), err);
+ if (err == -ENOENT)
+ err = -EIO;
+ ntfs_attr_reinit_search_ctx(ctx);
+ if (ntfs_attr_lookup(ni->type, ni->name, ni->name_len, CASE_SENSITIVE,
+ allocated_size >> vol->cluster_size_bits, NULL, 0,
+ ctx)) {
+ ntfs_error(vol->sb, "Failed to find last attribute extent of "
+ "attribute in error code path. Run chkdsk to "
+ "recover.");
+ write_lock_irqsave(&ni->size_lock, flags);
+ ni->allocated_size = new_alloc_size;
+ /*
+ * FIXME: This would fail if @ni is a directory... See above.
+ * FIXME: The calculation is wrong if we created a hole above.
+ * For now it does not matter as we never create holes.
+ */
+ if (NInoSparse(ni) || NInoCompressed(ni)) {
+ ni->itype.compressed.size += new_alloc_size -
+ allocated_size;
+ vi->i_blocks = ni->itype.compressed.size >> 9;
+ } else
+ vi->i_blocks = new_alloc_size >> 9;
+ write_unlock_irqrestore(&ni->size_lock, flags);
+ ntfs_attr_put_search_ctx(ctx);
+ unmap_mft_record(base_ni);
+ up_write(&ni->runlist.lock);
+ /*
+ * The only thing that is now wrong is the allocated size of the
+ * base attribute extent which chkdsk should be able to fix.
+ */
+ NVolSetErrors(vol);
+ return err;
+ }
+ ctx->attr->data.non_resident.highest_vcn = cpu_to_sle64(
+ (allocated_size >> vol->cluster_size_bits) - 1);
+undo_alloc:
+ ll = allocated_size >> vol->cluster_size_bits;
+ if (ntfs_cluster_free(ni, ll, -1, ctx) < 0) {
+ ntfs_error(vol->sb, "Failed to release allocated cluster(s) "
+ "in error code path. Run chkdsk to recover "
+ "the lost cluster(s).");
+ NVolSetErrors(vol);
+ }
+ m = ctx->mrec;
+ a = ctx->attr;
+ /*
+ * If the runlist truncation fails and/or the search context is no
+ * longer valid, we cannot resize the attribute record or build the
+ * mapping pairs array thus we mark the inode bad so that no access to
+ * the freed clusters can happen.
+ */
+ if (ntfs_rl_truncate_nolock(vol, &ni->runlist, ll) || IS_ERR(m)) {
+ ntfs_error(vol->sb, "Failed to %s in error code path. Run "
+ "chkdsk to recover.", IS_ERR(m) ?
+ "restore attribute search context" :
+ "truncate attribute runlist");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ } else if (mp_rebuilt) {
+ if (ntfs_attr_record_resize(m, a, attr_len)) {
+ ntfs_error(vol->sb, "Failed to restore attribute "
+ "record in error code path. Run "
+ "chkdsk to recover.");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ } else /* if (success) */ {
+ if (ntfs_mapping_pairs_build(vol, (u8*)a + le16_to_cpu(
+ a->data.non_resident.
+ mapping_pairs_offset), attr_len -
+ le16_to_cpu(a->data.non_resident.
+ mapping_pairs_offset), rl2, ll, -1,
+ NULL)) {
+ ntfs_error(vol->sb, "Failed to restore "
+ "mapping pairs array in error "
+ "code path. Run chkdsk to "
+ "recover.");
+ make_bad_inode(vi);
+ make_bad_inode(VFS_I(base_ni));
+ NVolSetErrors(vol);
+ }
+ flush_dcache_mft_record_page(ctx->ntfs_ino);
+ mark_mft_record_dirty(ctx->ntfs_ino);
+ }
+ }
+err_out:
+ if (ctx)
+ ntfs_attr_put_search_ctx(ctx);
+ if (m)
+ unmap_mft_record(base_ni);
+ up_write(&ni->runlist.lock);
+conv_err_out:
+ ntfs_debug("Failed. Returning error code %i.", err);
+ return err;
+}
+
+/**
* ntfs_attr_set - fill (a part of) an attribute with a byte
* @ni: ntfs inode describing the attribute to fill
* @ofs: offset inside the attribute at which to start to fill
diff --git a/fs/ntfs/attrib.h b/fs/ntfs/attrib.h
index a959af9..9074886 100644
--- a/fs/ntfs/attrib.h
+++ b/fs/ntfs/attrib.h
@@ -105,6 +105,9 @@ extern int ntfs_resident_attr_value_resi

extern int ntfs_attr_make_non_resident(ntfs_inode *ni, const u32 data_size);

+extern s64 ntfs_attr_extend_allocation(ntfs_inode *ni, s64 new_alloc_size,
+ const s64 new_data_size, const s64 data_start);
+
extern int ntfs_attr_set(ntfs_inode *ni, const s64 ofs, const s64 cnt,
const u8 val);

---
0.99.9
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
\
 
 \ /
  Last update: 2005-10-31 15:32    [W:0.112 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site