lkml.org 
[lkml]   [2005]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Infineon TPM: move infineon driver off pci_dev
From
Date
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>

On Thu, 2005-10-27 at 13:22 +0200, Marcel Selhorst wrote:
> Dear all,
>
> the following patch moves the Infineon TPM driver off pci device
> and makes it a pure pnp-driver. It was tested with IFX0101 and
> IFX0102 and is now based on the new tpm patchset (1 to 5) from Kylene
> Hall submitted two days ago. It now also includes pnp-port validation
> and region requesting.
>
> Best regards,
>
> Marcel Selhorst
>
> Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de>
> ---
>
> diff -pruN linux-2.6.14-rc5.ibm/drivers/char/tpm/tpm_infineon.c
> linux-2.6.14-rc5.infineon-v1.6/drivers/char/tpm/tpm_infineon.c
> --- linux-2.6.14-rc5.ibm/drivers/char/tpm/tpm_infineon.c 2005-10-27
> 13:28:54.000000000 +0200
> +++ linux-2.6.14-rc5.infineon-v1.6/drivers/char/tpm/tpm_infineon.c 2005-10-27
> 13:25:19.000000000 +0200
> @@ -5,6 +5,7 @@
> * Specifications at www.trustedcomputinggroup.org
> *
> * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de>
> + * Sirrix AG - security technologies, http://www.sirrix.com and
> * Applied Data Security Group, Ruhr-University Bochum, Germany
> * Project-Homepage: http://www.prosec.rub.de/tpm
> *
> @@ -31,7 +32,8 @@
> /* These values will be filled after PnP-call */
> static int TPM_INF_DATA = 0;
> static int TPM_INF_ADDR = 0;
> -static int pnp_registered = 0;
> +static int TPM_INF_BASE = 0;
> +static int TPM_INF_PORT_LEN = 0;
>
> /* TPM header definitions */
> enum infineon_tpm_header {
> @@ -143,11 +145,9 @@ static int wait(struct tpm_chip *chip, i
> }
> if (i == TPM_MAX_TRIES) { /* timeout occurs */
> if (wait_for_bit == STAT_XFE)
> - dev_err(chip->dev,
> - "Timeout in wait(STAT_XFE)\n");
> + dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n");
> if (wait_for_bit == STAT_RDA)
> - dev_err(chip->dev,
> - "Timeout in wait(STAT_RDA)\n");
> + dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n");
> return -EIO;
> }
> return 0;
> @@ -221,8 +221,7 @@ recv_begin:
> }
>
> if ((size == 0x6D00) && (buf[1] == 0x80)) {
> - dev_err(chip->dev,
> - "Error handling on vendor layer!\n");
> + dev_err(chip->dev, "Error handling on vendor layer!\n");
> return -EIO;
> }
>
> @@ -318,7 +317,7 @@ static void tpm_inf_cancel(struct tpm_ch
>
> static u8 tpm_inf_status(struct tpm_chip *chip)
> {
> - return inb(chip->vendor->base + 1);
> + return inb(chip->vendor->base + STAT);
> }
>
> static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
> @@ -362,30 +361,11 @@ static const struct pnp_device_id tpm_pn
> {"IFX0102", 0},
> {"", 0}
> };
> +
> MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
>
> static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
> - const struct pnp_device_id *dev_id)
> -{
> - if (pnp_port_valid(dev, 0)) {
> - TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff);
> - TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff);
> - tpm_inf.base = pnp_port_start(dev, 1);
> - dev_info(&dev->dev, "Found %s with ID %s\n",
> - dev->name, dev_id->id);
> - return 0;
> - }
> - return -ENODEV;
> -}
> -
> -static struct pnp_driver tpm_inf_pnp = {
> - .name = "tpm_inf_pnp",
> - .id_table = tpm_pnp_tbl,
> - .probe = tpm_inf_pnp_probe,
> -};
> -
> -static int __devinit tpm_inf_probe(struct pci_dev *pci_dev,
> - const struct pci_device_id *pci_id)
> + const struct pnp_device_id *dev_id)
> {
> int rc = 0;
> u8 iol, ioh;
> @@ -394,30 +374,28 @@ static int __devinit tpm_inf_probe(struc
> int productid[2];
> char chipname[20];
>
> - rc = pci_enable_device(pci_dev);
> - if (rc)
> - return rc;
> -
> - dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device);
> -
> - /* read IO-ports from PnP */
> - rc = pnp_register_driver(&tpm_inf_pnp);
> - if (rc < 0) {
> - dev_err(&pci_dev->dev,
> - "Error %x from pnp_register_driver!\n",rc);
> - goto error2;
> - }
> - if (!rc) {
> - dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
> - goto error;
> + /* read IO-ports through PnP */
> + if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
> + !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
> + TPM_INF_ADDR = pnp_port_start(dev, 0);
> + TPM_INF_DATA = (TPM_INF_ADDR + 1);
> + TPM_INF_BASE = pnp_port_start(dev, 1);
> + TPM_INF_PORT_LEN = pnp_port_len(dev, 1);
> + if (!TPM_INF_PORT_LEN)
> + return -EINVAL;
> + dev_info(&dev->dev, "Found %s with ID %s\n",
> + dev->name, dev_id->id);
> + if (!((TPM_INF_BASE >> 8) & 0xff))
> + return -EINVAL;
> + /* publish my base address and request region */
> + tpm_inf.base = TPM_INF_BASE;
> + if (request_region
> + (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
> + release_region(tpm_inf.base, TPM_INF_PORT_LEN);
> + return -EINVAL;
> + }
> } else {
> - pnp_registered = 1;
> - }
> -
> - /* Make sure, we have received valid config ports */
> - if (!TPM_INF_ADDR) {
> - dev_err(&pci_dev->dev, "No valid IO-ports received!\n");
> - goto error;
> + return -EINVAL;
> }
>
> /* query chip for its vendor, its version number a.s.o. */
> @@ -449,10 +427,6 @@ static int __devinit tpm_inf_probe(struc
>
> if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) {
>
> - if (tpm_inf.base == 0) {
> - dev_err(&pci_dev->dev, "No IO-ports found!\n");
> - goto error;
> - }
> /* configure TPM with IO-ports */
> outb(IOLIMH, TPM_INF_ADDR);
> outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
> @@ -466,10 +440,11 @@ static int __devinit tpm_inf_probe(struc
> iol = inb(TPM_INF_DATA);
>
> if ((ioh << 8 | iol) != tpm_inf.base) {
> - dev_err(&pci_dev->dev,
> + dev_err(&dev->dev,
> "Could not set IO-ports to %04x\n",
> tpm_inf.base);
> - goto error;
> + release_region(tpm_inf.base, TPM_INF_PORT_LEN);
> + return -EIO;
> }
>
> /* activate register */
> @@ -481,7 +456,7 @@ static int __devinit tpm_inf_probe(struc
> outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
>
> /* Finally, we're done, print some infos */
> - dev_info(&pci_dev->dev, "TPM found: "
> + dev_info(&dev->dev, "TPM found: "
> "config base 0x%x, "
> "io base 0x%x, "
> "chip version %02x%02x, "
> @@ -489,67 +464,51 @@ static int __devinit tpm_inf_probe(struc
> "product id %02x%02x"
> "%s\n",
> TPM_INF_ADDR,
> - tpm_inf.base,
> + TPM_INF_BASE,
> version[0], version[1],
> vendorid[0], vendorid[1],
> productid[0], productid[1], chipname);
>
> - rc = tpm_register_hardware(&pci_dev->dev, &tpm_inf);
> - if (rc < 0)
> - goto error;
> + rc = tpm_register_hardware(&dev->dev, &tpm_inf);
> + if (rc < 0) {
> + release_region(tpm_inf.base, TPM_INF_PORT_LEN);
> + return -ENODEV;
> + }
> return 0;
> } else {
> - dev_info(&pci_dev->dev, "No Infineon TPM found!\n");
> -error:
> - pnp_unregister_driver(&tpm_inf_pnp);
> -error2:
> - pci_disable_device(pci_dev);
> - pnp_registered = 0;
> + dev_info(&dev->dev, "No Infineon TPM found!\n");
> return -ENODEV;
> }
> }
>
> -static __devexit void tpm_inf_remove(struct pci_dev* pci_dev)
> +static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
> {
> - struct tpm_chip* chip = pci_get_drvdata(pci_dev);
> -
> - if( chip )
> + struct tpm_chip *chip = pnp_get_drvdata(dev);
> +
> + if (chip) {
> + release_region(chip->vendor->base, TPM_INF_PORT_LEN);
> tpm_remove_hardware(chip->dev);
> + }
> }
>
> -static struct pci_device_id tpm_pci_tbl[] __devinitdata = {
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
> - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)},
> - {0,}
> -};
> -
> -MODULE_DEVICE_TABLE(pci, tpm_pci_tbl);
> -
> -static struct pci_driver inf_pci_driver = {
> - .name = "tpm_inf",
> - .id_table = tpm_pci_tbl,
> - .probe = tpm_inf_probe,
> - .remove = __devexit_p(tpm_inf_remove),
> - .suspend = tpm_pm_suspend,
> - .resume = tpm_pm_resume,
> +static struct pnp_driver tpm_inf_pnp = {
> + .name = "tpm_inf_pnp",
> + .driver.owner = THIS_MODULE,
> + .id_table = tpm_pnp_tbl,
> + .probe = tpm_inf_pnp_probe,
> + .remove = tpm_inf_pnp_remove,
> + .driver.suspend = tpm_pm_suspend,
> + .driver.resume = tpm_pm_resume,
> };
>
> static int __init init_inf(void)
> {
> - return pci_register_driver(&inf_pci_driver);
> + return pnp_register_driver(&tpm_inf_pnp);
> }
>
> static void __exit cleanup_inf(void)
> {
> - if (pnp_registered)
> - pnp_unregister_driver(&tpm_inf_pnp);
> - pci_unregister_driver(&inf_pci_driver);
> + pnp_unregister_driver(&tpm_inf_pnp);
> }
>
> module_init(init_inf);
> @@ -557,5 +516,5 @@ module_exit(cleanup_inf);
>
> MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
> MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
> -MODULE_VERSION("1.5");
> +MODULE_VERSION("1.6");
> MODULE_LICENSE("GPL");
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-10-27 16:09    [W:0.134 / U:2.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site