Messages in this thread | | | From | Michael Brade <> | Subject | ieee1394: sbp2: sbp2util_node_write_no_wait failed | Date | Mon, 24 Oct 2005 14:51:03 +0200 |
| |
Hi,
I get the above message frequently while copying data (around 200000 mail files, 2GB) from my laptop to an external harddisk via ieee1394. The ieee system completely deadlocked with 2.6.13 without the chance to umount or reuse the device. Now I upgraded to 2.6.14-rc5 and I still get the error followed by a 10sec pause or so, but then the copying continues. I will have to check if it copied all data correctly, though.
When attaching the device this is what the kernel says:
kernel: ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... kernel: ieee1394: Error parsing configrom for node 0-00:1023 kernel: ieee1394: Node changed: 0-00:1023 -> 0-01:1023 kernel: ieee1394: Node added: ID:BUS[0-00:1023] GUID[0000000e000031d1] kernel: scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices kernel: ieee1394: sbp2: Logged into SBP-2 device kernel: ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] kernel: Vendor: WDC WD20 Model: 00JB-00GVC0 Rev: kernel: Type: Direct-Access-RBC ANSI SCSI revision: 04 kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 14 kernel: SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) kernel: sda: asking for cache data failed kernel: sda: assuming drive cache: write through kernel: SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB) kernel: sda: asking for cache data failed kernel: sda: assuming drive cache: write through kernel: sda: sda1 sda2 sda3 sda4 kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
And the complete error message:
kernel: ieee1394: sbp2: sbp2util_node_write_no_wait failed. kernel: kernel: ieee1394: sbp2: aborting sbp2 command kernel: scsi1 : destination target 0, lun 0 kernel: command: cdb[0]=0x2a: 2a 00 09 76 04 73 00 00 01 00 kernel: ieee1394: sbp2: sbp2util_node_write_no_wait failed. kernel: kernel: ieee1394: sbp2: aborting sbp2 command kernel: scsi1 : destination target 0, lun 0 kernel: command: cdb[0]=0x2a: 2a 00 08 5f 83 54 00 00 01 00
[lots more of that, the command hex code changes everytime]
I have a preemt kernel: CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y
and the 1000hz timer: CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_PHYSICAL_START=0x100000
and the following is the ieee config: CONFIG_IEEE1394=m CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_SBP2_PHYS_DMA=y # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m # CONFIG_IEEE1394_CMP is not set
Please tell me if you need more info, I'd like to provide all the help needed to fix this issue.
Cheers, -- Michael Brade; KDE Developer, Student of Computer Science |-mail: echo brade !#|tr -d "c oh"|s\e\d 's/e/\@/2;s/$/.org/;s/bra/k/2' °--web: http://www.kde.org/people/michaelb.html
KDE 3: The Next Generation in Desktop Experience [unhandled content-type:application/pgp-signature] | |