Messages in this thread | | | Date | Sun, 2 Oct 2005 23:14:59 +0400 (MSD) | From | Evgeny Rodichev <> | Subject | Re: [PATCH 2.6.14-rc2] libata: Marvell SATA support (DMA mode) |
| |
Hi,
this patch doesn't work for me. Controller is
03:04.0 RAID bus controller: Marvell MV88SX6041 4-port SATA II PCI-X Controller (rev 03) Subsystem: Super Micro Computer Inc: Unknown device 6880 Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 64, IRQ 20 Memory at dd300000 (64-bit, non-prefetchable) [size=1M] I/O ports at 3000 [size=256] Capabilities: [40] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [60] PCI-X non-bridge device.
After modprobe sata_mv I got in dmesg:
sata_mv version 0.22 ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 56 (level, low) -> IRQ 20 sata_mv(0000:03:04.0) 32 slots 4 ports unknown mode IRQ via INTx ata3: SATA max UDMA/133 cmd 0x0 ctl 0xF8A22120 bmdma 0x0 irq 20 ata4: SATA max UDMA/133 cmd 0x0 ctl 0xF8A24120 bmdma 0x0 irq 20 ata5: SATA max UDMA/133 cmd 0x0 ctl 0xF8A26120 bmdma 0x0 irq 20 ata6: SATA max UDMA/133 cmd 0x0 ctl 0xF8A28120 bmdma 0x0 irq 20 ATA: abnormal status 0x80 on port 0xF8A2211C ATA: abnormal status 0x80 on port 0xF8A2211C
modprobe did not finished, and it is impossible to kill the modprobe process.
Regards, E.R. _________________________________________________________________________ Evgeny Rodichev Sternberg Astronomical Institute email: er@sai.msu.su Moscow State University Phone: 007 (095) 939 2383 Fax: 007 (095) 932 8841 http://www.sai.msu.su/~er - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |