lkml.org 
[lkml]   [2005]   [Oct]   [19]   [last100]   RSS Feed
Views: [more markup]   [less markup]   [headers]   [forward]  
 
Messages in this thread
/
DateWed, 19 Oct 2005 18:04:09 +0200
FromPetr Vandrovec <>
SubjectRe: 1.6ms jitter in rtc_wakeup (Re: 2.6.14-rc4-rt1)
Esben Nielsen wrote:
> On Fri, 14 Oct 2005, Esben Nielsen wrote:
>>>>I set up rtc_wakeup and got a jitter up 1.6ms!
>>>>It came when I cd'en into a nfs-mount and typed ls.
>>>
>>>>      ls-11239 0Dn..    4us : profile_hit (__schedule)
>>>>      ls-11239 0Dn.1    4us : sched_clock (__schedule)
>>>>      ls-11239 0Dn.1    5us : check_tsc_unstable (sched_clock)
>>>>      ls-11239 0Dn.1    5us : tsc_read_c3_time (sched_clock)
>>>>   IRQ 8-775   0D..2    6us : __switch_to (__schedule)
>>>>   IRQ 8-775   0D..2    7us!: __schedule <ls-11239> (75 0)
>>>>   IRQ 8-775   0...1 1594us : trace_stop_sched_switched (__schedule)
>>>>   IRQ 8-775   0D..2 1594us : trace_stop_sched_switched <IRQ 8-775> (0 0)
>>>>   IRQ 8-775   0D..2 1595us : trace_stop_sched_switched (__schedule)
>>>
>>>ouch! This very much looks like a hardware induced latency, because the 
>>>codepath from those two __schedule points is extremely short and there 
>>>is no loop there. Have you tested this particular box before too? If 
>>>not, can you reproduce this latency with older versions of -rt too on 
>>>the same box, or is this completely new? 
>>
>>I have been testing on this box before but never with such long latencies
>>before.
> 
> 
> I could not reproduce it on linux-2.6.14-rc3-rt10. The maximum meassured
> rtc_wakeup is 146us with the same config options. 
> Running linux-2.6.14-rc4-rt1 with ethernet disabled gave a maximum latency
> of 1468us while building the kernel:

Hello,
   I've just wrote to Randy that I'm seeing same on non-RT kernel when system
uses HPET.  It makes it unusable for >512Hz, as when 1kHz timer is requested
we miss one tick and HPET interrupts stop for 5 minutes (32bit * 69.8ns).
Delay happens sometime after HPET programming - when frequency like 16kHz
is programmed, first ~6 interrupts arrive correctly, but 7th is delayed by
1 millisecond or so when compared with time on which it should arrive.

   I've found it on VIA board, so I just assumed that VIA's hardware is
strange and went back to disabling HPET.

   Maybe I should try -rt kernel sometime, but as I need working RTC interrupts
on that box for daily work, it is not simple to experiment with nohpet/hpet
options.
								Petr

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-10-19 16:06    [from the cache]
©2003-2008