lkml.org 
[lkml]   [2005]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[2.6 patch] remove dp83840.h
On Mon, Jan 31, 2005 at 03:46:07PM -0800, David S. Miller wrote:
> On Tue, 1 Feb 2005 00:41:58 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
> > dp83840.h is included once but none of the definitions it contains is
> > actually used.
> >
> > Ralf Baechle wants that it stays as documentation, so this patch moves
> > it under Documentation/ .
>
> No, let's kill this thing altogether. The only driver in the world
> using the CSCONFIG_* defines in there is the sunhme driver and it
> defines it's own macros in drivers/net/sunhme.h This header is more
> than useless these days.
>
> The header still exists in older trees and the revision history.
> So people can still get to it there.

OK, patch below

cu
Adrian


<-- snip -->


dp83840.h is included once but none of the definitions it contains is
actually used.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---
drivers/net/ioc3-eth.c | 1
include/linux/dp83840.h | 41 ---------------------------
2 files changed, 42 deletions(-)
--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old 2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c 2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/dp83840.h>
#include <net/ip.h>

#include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h 2004-10-18 23:54:32.000000000 +0200
+++ /dev/null 2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode. It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG 0x17 /* CS configuration */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1 0x0001 /* Unused... */
-#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
-#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
-#define CSCONFIG_RESV2 0x0008 /* Unused... */
-#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
-#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
-#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
-#define CSCONFIG_RESV3 0x0700 /* Unused... */
-#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
-#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
-#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
-#define CSCONFIG_RESV4 0x4000 /* Unused... */
-#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
-
-#endif /* __LINUX_DP83840_H */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site