lkml.org 
[lkml]   [2005]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH][I2C] ST M41T00 I2C RTC chip driver
linux-os wrote:

>
> On ix86 machines, it is appropriate to read the RTC clock
> several times in a row until nothing changes. This protects
> against getting bad readings when some values wrap (like
> seconds). You can't stop the clock when you read it
> or you will lose time. I don't see anything like this in your code.
> Also, when setting the clock it
> is necessary to stop the clock so its settings don't
> change while you are writing a new time. I also don't
> see anything like this in your code either.


This particular RTC chip provide no mechanism to manually stop the clock
for reading or writing. However, when you begin reading the clock
registers, it delays updating the externally visible register values for
250ms but contiues to keep time internally so time isn't lost. I can't
find anything in the manual WRT updating the clock.

There is a problem that if all the register reads don't happen within
the 250ms window, it could return a bad value if a register wraps.
Unless someone else points out why this is a bad idea, I'll add a loop
to ensure the same values were read twice in a row.

>
>
> Also ix86 machines have a spin-lock, rtc_lock, so that
> other procedures, even interrupts can access its registers.
> I see you using a semaphore that can't be used in interrupt
> context.


This is an I2C based RTC chip and the I2C subsystem used to access it
assumes (AFAICT) that its not called from an interrupt handler (e.g.,
drivers/i2c/i2c-core.c:i2c_transfer calls() calls down()/up()). So I
need to handle an interrupt handler calling this driver which then calls
into code that assumes its not in an interrupt handler. That's why the
'set' routine schedules a tasklet if its in an interrupt handler. In
ppc, at least, the 'get' routine isn't called from an interrupt so its
not an issue.

>
>
> Notice: the RTC clock is used for high-precision timing
> via interrupt in some ix86 drivers. If you modify the
> RTC code on all platforms as you propose, you cannot
> "keep" the RTC all to your self. Its interrupt must
> be available to drivers and access to the hardware needs
> to be locked with the existing spin-lock.


Hmm, interesting. Note that this RTC doesn't generate an
interrupt/initiate an i2c transaction.

>
>
> I note that on 2.6.9 on somebody broke it so that, the interrupt is
> used for something only ONCE during startup and ONCE during shut-down.
>
> CPU0
> 0: 6225448 IO-APIC-edge timer
> 1: 14002 IO-APIC-edge i8042
> 8: 1 IO-APIC-edge rtc <--- bingo
> 9: 0 IO-APIC-level acpi
> [snipped...]
>
> I don't have a clue why anybody would grab that interrupt. Fortunately,
> the interrupt-grabbing code can be loaded as a module and then
> unloaded so that other drivers can use that device and its interrupt.
> Any changes to the RTC code need to consider these things.


Okay, thanks for the insight.

Mark

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.182 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site