lkml.org 
[lkml]   [2005]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 2.6.9 & 2.6.10 unresponsive to keyboard upon bootup
    Date
    Same problem with me. I also have a laptop and I also have the same problem 
    started in the same period.

    Below my logs and config:
    Bye
    Marco

    kernel: Inspecting /boot/System.map-2.6.11-rc1
    kernel: Loaded 23459 symbols from /boot/System.map-2.6.11-rc1.
    kernel: Symbols matchkernel version 2.6.11.
    kernel: No module symbols loaded -kernel modules not enabled.
    kernel: BIOS-provided physical RAM map:
    kernel: 511MB LOWMEM available.
    kernel: On node 0 totalpages: 130928
    kernel: DMA zone: 4096 pages, LIFO batch:1
    kernel: Normal zone: 126832 pages, LIFO batch:16
    kernel: HighMem zone: 0 pages, LIFO batch:1
    kernel: DMI present.
    kernel: ACPI: RSDP (v002 IBM ) @ 0x000f7010
    kernel: ACPI: XSDT (v001 IBM TP-1I 0x00002032 LTP 0x00000000) @
    0x1ff73397
    kernel: ACPI: FADT (v001 IBM TP-1I 0x00002032 IBM 0x00000001) @
    0x1ff733e3
    kernel: ACPI: SSDT (v001 IBM TP-1I 0x00002032 MSFT 0x0100000d) @
    0x1ff73497
    kernel: ACPI: ECDT (v001 IBM TP-1I 0x00002032 IBM 0x00000001) @
    0x1ff7df54
    kernel: ACPI: TCPA (v001 IBM TP-1I 0x00002032 PTL 0x00000001) @
    0x1ff7dfa6
    kernel: ACPI: BOOT (v001 IBM TP-1I 0x00002032 LTP 0x00000001) @
    0x1ff7dfd8
    kernel: ACPI: DSDT (v001 IBM TP-1I 0x00002032 MSFT 0x0100000d) @
    0x00000000
    kernel: ACPI: PM-Timer IO Port: 0x1008
    kernel: mapped APIC to ffffd000 (01401000)
    kernel: Initializing CPU#0
    kernel: Using pmtmr for high-res timesource
    kernel: Memory: 515516k/523712k available (1512kkernel code, 7640k reserved,
    684k data, 180k init, 0k highmem)
    kernel: Calibrating delay loop... 3915.77 BogoMIPS (lpj=1957888)
    kernel: CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000
    00000400 00000000 00000000
    kernel: CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000
    00000400 00000000 00000000
    kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
    kernel: CPU: L2 cache: 512K
    kernel: CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080
    00000400 00000000 00000000
    kernel: Intel machine check architecture supported.
    kernel: Intel machine check reporting enabled on CPU#0.
    kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    kernel: CPU0: Thermal monitoring enabled
    kernel: Enabling fast FPU save and restore... done.
    kernel: Enabling unmasked SIMD FPU exception support... done.
    kernel: Checking 'hlt' instruction... OK.
    kernel: checking if image is initramfs...it isn't (no cpio magic); looks like
    an initrd
    kernel: Freeing initrd memory: 156k freed
    kernel: NET: Registered protocol family 16
    kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
    kernel: PCI: Using configuration type 1
    kernel: mtrr: v2.0 (20020519)
    kernel: ACPI: Subsystem revision 20041210
    kernel: ACPI: Found ECDT
    kernel: ACPI: Interpreter enabled
    kernel: ACPI: Using PIC for interrupt routing
    kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
    kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    kernel: PCI: Transparent bridge - 0000:00:1e.0
    kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    kernel: ACPI: Embedded Controller [EC] (gpe 28)
    kernel: ACPI: Power Resource [PUBS] (on)
    kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
    kernel: pnp: PnP ACPI init
    kernel: pnp: PnP ACPI: found 13 devices
    kernel: PnPBIOS: Disabled by ACPI
    kernel: PCI: Using ACPI for IRQ routing
    kernel: ** PCI interrupts are no longer routed automatically. If this
    kernel: ** causes a device to stop working, it is probably because the
    kernel: ** driver failed to call pci_enable_device(). As a temporary
    kernel: ** workaround, the "pci=routeirq" argument restores the old
    kernel: ** behavior. If this argument makes the device work again,
    kernel: ** please email the output of "lspci" to bjorn.helgaas@hp.com
    kernel: ** so I can fix the driver.
    kernel: Simple Boot Flag at 0x35 set to 0x1
    kernel: IBM machine detected. Enabling interrupts during APM calls.
    kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    kernel: apm: overridden by ACPI.
    kernel: Initializing Cryptographic API
    kernel: vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 1875k,
    total 16320k
    kernel: vesafb: mode is 800x600x16, linelength=1600, pages=16
    kernel: vesafb: protected mode interface info at c000:5613
    kernel: vesafb: scrolling: redraw
    kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    kernel: fb0: VESA VGA frame buffer device
    kernel: isapnp: Scanning for PnP cards...
    kernel: isapnp: No Plug & Play device found
    kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
    enabled
    kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
    kernel: io scheduler noop registered
    kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    kernel: ICH3M: IDE controller at PCI slot 0000:00:1f.1
    kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
    kernel: ICH3M: chipset revision 2
    kernel: ICH3M: not 100%% native mode: will probe irqs later
    kernel: ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    kernel: ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
    kernel: Probing IDE interface ide0...
    kernel: Probing IDE interface ide1...
    kernel: hda: max request size: 128KiB
    kernel: hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63,
    UDMA(100)
    kernel: hda: cache flushes not supported
    kernel: hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
    kernel: mice: PS/2 mouse device common for all mice
    kernel: NET: Registered protocol family 2
    kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
    kernel: TCP: Hash tables configured (established 32768 bind 32768)
    kernel: NET: Registered protocol family 1
    kernel: ACPI: (supports S0 S3 S4 S5)
    kernel: RAMDISK: Compressed image found at block 0
    kernel: EXT3-fs: mounted filesystem with ordered data mode.
    kernel: kjournald starting. Commit interval 5 seconds
    kernel: Freeing unusedkernel memory: 180k freed
    kernel: ACPI: AC Adapter [AC] (on-line)
    kernel: ACPI: Battery Slot [BAT0] (battery present)
    kernel: ACPI: Power Button (FF) [PWRF]
    kernel: ACPI: Lid Switch [LID]
    kernel: ACPI: Sleep Button (CM) [SLPB]
    kernel: ibm_acpi: IBM ThinkPad ACPI Extras v0.8
    kernel: ibm_acpi: http://ibm-acpi.sf.net/
    kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    kernel: ACPI: Processor [CPU] (supports 8 throttling states)
    kernel: ACPI: Thermal Zone [THM0] (54 C)
    kernel: ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    kernel: usbcore: registered new driver usbfs
    kernel: usbcore: registered new driver hub
    kernel: USB Universal Host Controller Interface driver v2.2
    kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
    kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
    kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
    kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800
    kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
    kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
    kernel: usb usb1: default language 0x0409
    kernel: usb usb1: Product: Intel Corp. 82801CA/CAM USB (Hub #1)
    kernel: usb usb1: Manufacturer: Linux 2.6.11-rc1 uhci_hcd
    kernel: usb usb1: SerialNumber: 0000:00:1d.0
    kernel: usb usb1: hotplug
    kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0)
    kernel: usb 1-0:1.0: hotplug
    kernel: hub 1-0:1.0: usb_probe_interface
    kernel: hub 1-0:1.0: usb_probe_interface - got id
    kernel: hub 1-0:1.0: USB hub found
    kernel: hub 1-0:1.0: 2 ports detected
    kernel: hub 1-0:1.0: standalone hub
    kernel: hub 1-0:1.0: no power switching (usb 1.0)
    kernel: hub 1-0:1.0: individual port over-current protection
    kernel: hub 1-0:1.0: power on to power good time: 2ms
    kernel: hub 1-0:1.0: local power source is good
    kernel: hub 1-0:1.0: state 5 ports 2 chg 0006 evt 0007
    kernel: hub 1-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
    kernel: hub 1-0:1.0: port 2, status 0100, change 0000, 12 Mb/s
    kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
    kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2)
    kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
    kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 0x1820
    kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
    kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
    kernel: usb usb2: default language 0x0409
    kernel: usb usb2: Product: Intel Corp. 82801CA/CAM USB (Hub #2)
    kernel: usb usb2: Manufacturer: Linux 2.6.11-rc1 uhci_hcd
    kernel: usb usb2: SerialNumber: 0000:00:1d.1
    kernel: usb usb2: hotplug
    kernel: usb usb2: adding 2-0:1.0 (config #1, interface 0)
    kernel: usb 2-0:1.0: hotplug
    kernel: hub 2-0:1.0: usb_probe_interface
    kernel: hub 2-0:1.0: usb_probe_interface - got id
    kernel: hub 2-0:1.0: USB hub found
    kernel: hub 2-0:1.0: 2 ports detected
    kernel: hub 2-0:1.0: standalone hub
    kernel: hub 2-0:1.0: no power switching (usb 1.0)
    kernel: hub 2-0:1.0: individual port over-current protection
    kernel: hub 2-0:1.0: power on to power good time: 2ms
    kernel: hub 2-0:1.0: local power source is good
    kernel: hub 2-0:1.0: state 5 ports 2 chg 0006 evt 0007
    kernel: uhci_hcd 0000:00:1d.1: port 1 portsc 01a3,00
    kernel: hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
    kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
    kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801CA/CAM USB (Hub #3)
    kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
    kernel: uhci_hcd 0000:00:1d.2: irq 11, io base 0x1840
    kernel: hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
    kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
    kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
    kernel: usb usb3: default language 0x0409
    kernel: usb usb3: Product: Intel Corp. 82801CA/CAM USB (Hub #3)
    kernel: usb usb3: Manufacturer: Linux 2.6.11-rc1 uhci_hcd
    kernel: usb usb3: SerialNumber: 0000:00:1d.2
    kernel: usb usb3: hotplug
    kernel: usb usb3: adding 3-0:1.0 (config #1, interface 0)
    kernel: usb 3-0:1.0: hotplug
    kernel: hub 3-0:1.0: usb_probe_interface
    kernel: hub 3-0:1.0: usb_probe_interface - got id
    kernel: hub 3-0:1.0: USB hub found
    kernel: hub 3-0:1.0: 2 ports detected
    kernel: hub 3-0:1.0: standalone hub
    kernel: hub 3-0:1.0: no power switching (usb 1.0)
    kernel: hub 3-0:1.0: individual port over-current protection
    kernel: hub 3-0:1.0: power on to power good time: 2ms
    kernel: hub 3-0:1.0: local power source is good
    kernel: usb 2-1: new low speed USB device using uhci_hcd and address 2
    kernel: uhci_hcd 0000:00:1d.0: suspend_hc
    kernel: usb 2-1: skipped 1 descriptor after interface
    kernel: usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
    kernel: usb 2-1: default language 0x0409
    kernel: usb 2-1: Product: USB Mouse
    kernel: usb 2-1: Manufacturer: Logitech
    kernel: usb 2-1: hotplug
    kernel: usb 2-1: adding 2-1:1.0 (config #1, interface 0)
    kernel: usb 2-1:1.0: hotplug
    kernel: hub 2-0:1.0: port 2, status 0100, change 0000, 12 Mb/s
    kernel: hub 3-0:1.0: state 5 ports 2 chg 0006 evt 0007
    kernel: hub 3-0:1.0: port 1, status 0100, change 0000, 12 Mb/s
    kernel: hub 3-0:1.0: port 2, status 0100, change 0000, 12 Mb/s
    kernel: hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0002
    kernel: uhci_hcd 0000:00:1d.2: suspend_hc
    kernel: usbcore: registered new driver hiddev
    kernel: usbhid 2-1:1.0: usb_probe_interface
    kernel: usbhid 2-1:1.0: usb_probe_interface - got id
    kernel: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1
    kernel: usbcore: registered new driver usbhid
    kernel: /bk/linux-2.6/drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    kernel: EXT3 FS on hda5, internal journal
    kernel: Adding 511520k swap on /dev/hda6. Priority:-1 extents:1
    kernel: Non-volatile memory driver v1.2
    kernel: Linux agpgart interface v0.100 (c) Dave Jones
    kernel: agpgart: Detected an Intel i845 Chipset.
    kernel: agpgart: Maximum main memory to use for agp memory: 439M
    kernel: agpgart: AGP aperture is 64M @ 0xe0000000
    kernel: kjournald starting. Commit interval 5 seconds
    kernel: EXT3 FS on hda7, internal journal
    kernel: EXT3-fs: mounted filesystem with ordered data mode.
    kernel: NTFS driver 2.1.22 [Flags: R/O MODULE].
    kernel: NTFS volume version 3.1.
    kernel: loop: loaded (max 8 devices)
    kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    kernel: Uniform CD-ROM driver Revision: 3.20
    kernel: e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
    kernel: e100: Copyright(c) 1999-2004 Intel Corporation
    kernel: ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
    kernel: e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr
    00:09:6B:93:2E:5C
    kernel: NET: Registered protocol family 17
    kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
    kernel: CSLIP: code copyright 1989 Regents of the University of California
    kernel: PPP generic driver version 2.4.2
    kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
    kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
    kernel: intel8x0_measure_ac97_clock: measured 49423 usecs
    kernel: intel8x0: clocking to 48000
    kernel: Kernel logging (proc) stopped.
    kernel: Kernel log daemon terminating.






    #
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.11-rc1
    # Sat Jan 15 11:06:45 2005
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_LOCK_KERNEL=y

    #
    # General setup
    #
    CONFIG_LOCALVERSION=""
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    CONFIG_SYSCTL=y
    # CONFIG_AUDIT is not set
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_HOTPLUG=y
    CONFIG_KOBJECT_UEVENT=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_EMBEDDED=y
    CONFIG_KALLSYMS=y
    CONFIG_KALLSYMS_EXTRA_PASS=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SHMEM=y
    CONFIG_CC_ALIGN_FUNCTIONS=0
    CONFIG_CC_ALIGN_LABELS=0
    CONFIG_CC_ALIGN_LOOPS=0
    CONFIG_CC_ALIGN_JUMPS=0
    # CONFIG_TINY_SHMEM is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_ELAN is not set
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    CONFIG_MPENTIUM4=y
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=7
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_HPET_TIMER=y
    # CONFIG_SMP is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_BKL=y
    CONFIG_X86_UP_APIC=y
    CONFIG_X86_UP_IOAPIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    # CONFIG_X86_MCE_NONFATAL is not set
    CONFIG_X86_MCE_P4THERMAL=y
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    CONFIG_MICROCODE=m
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m

    #
    # Firmware Drivers
    #
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_HAVE_DEC_LOCK=y
    # CONFIG_REGPARM is not set

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    # CONFIG_PM_DEBUG is not set
    # CONFIG_SOFTWARE_SUSPEND is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_THERMAL=m
    # CONFIG_ACPI_ASUS is not set
    CONFIG_ACPI_IBM=m
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    # CONFIG_ACPI_CONTAINER is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    CONFIG_APM=y
    # CONFIG_APM_IGNORE_USER_SUSPEND is not set
    # CONFIG_APM_DO_ENABLE is not set
    CONFIG_APM_CPU_IDLE=y
    # CONFIG_APM_DISPLAY_BLANK is not set
    CONFIG_APM_RTC_IS_GMT=y
    CONFIG_APM_ALLOW_INTS=y
    # CONFIG_APM_REAL_MODE_POWER_OFF is not set

    #
    # CPU Frequency scaling
    #
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_DEBUG=y
    # CONFIG_CPU_FREQ_PROC_INTF is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=y
    # CONFIG_CPU_FREQ_24_API is not set
    CONFIG_CPU_FREQ_GOV_ONDEMAND=m
    CONFIG_CPU_FREQ_TABLE=y

    #
    # CPUFreq processor drivers
    #
    CONFIG_X86_ACPI_CPUFREQ=m
    # CONFIG_X86_POWERNOW_K6 is not set
    # CONFIG_X86_POWERNOW_K7 is not set
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_GX_SUSPMOD is not set
    CONFIG_X86_SPEEDSTEP_CENTRINO=m
    CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
    CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
    CONFIG_X86_SPEEDSTEP_ICH=m
    CONFIG_X86_SPEEDSTEP_SMI=m
    CONFIG_X86_P4_CLOCKMOD=m
    # CONFIG_X86_CPUFREQ_NFORCE2 is not set
    # CONFIG_X86_LONGRUN is not set
    # CONFIG_X86_LONGHAUL is not set

    #
    # shared options
    #
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_MSI=y
    CONFIG_PCI_LEGACY_PROC=y
    CONFIG_PCI_NAMES=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set

    #
    # PCCARD (PCMCIA/CardBus) support
    #
    # CONFIG_PCCARD is not set

    #
    # PC-card bridges
    #
    CONFIG_PCMCIA_PROBE=y

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_AOUT is not set
    CONFIG_BINFMT_MISC=m

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_STANDALONE is not set
    # CONFIG_PREVENT_FIRMWARE_BUILD is not set
    CONFIG_FW_LOADER=m

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_PC_CML1=m
    # CONFIG_PARPORT_SERIAL is not set
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    # CONFIG_PARPORT_OTHER is not set
    # CONFIG_PARPORT_1284 is not set

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    CONFIG_ISAPNP=y
    CONFIG_PNPBIOS=y
    CONFIG_PNPBIOS_PROC_FS=y
    CONFIG_PNPACPI=y

    #
    # Block devices
    #
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_XD is not set
    CONFIG_PARIDE=m
    CONFIG_PARIDE_PARPORT=m

    #
    # Parallel IDE high-level drivers
    #
    CONFIG_PARIDE_PD=m
    CONFIG_PARIDE_PCD=m
    CONFIG_PARIDE_PF=m
    # CONFIG_PARIDE_PT is not set
    CONFIG_PARIDE_PG=m

    #
    # Parallel IDE protocol modules
    #
    # CONFIG_PARIDE_ATEN is not set
    # CONFIG_PARIDE_BPCK is not set
    # CONFIG_PARIDE_BPCK6 is not set
    # CONFIG_PARIDE_COMM is not set
    # CONFIG_PARIDE_DSTR is not set
    # CONFIG_PARIDE_FIT2 is not set
    # CONFIG_PARIDE_FIT3 is not set
    # CONFIG_PARIDE_EPAT is not set
    # CONFIG_PARIDE_EPIA is not set
    # CONFIG_PARIDE_FRIQ is not set
    # CONFIG_PARIDE_FRPW is not set
    # CONFIG_PARIDE_KBIC is not set
    # CONFIG_PARIDE_KTTI is not set
    # CONFIG_PARIDE_ON20 is not set
    # CONFIG_PARIDE_ON26 is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=m
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=32000
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_LBD=y
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set

    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=m
    CONFIG_IOSCHED_DEADLINE=m
    CONFIG_IOSCHED_CFQ=m
    # CONFIG_ATA_OVER_ETH is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=m
    CONFIG_BLK_DEV_IDETAPE=m
    CONFIG_BLK_DEV_IDEFLOPPY=m
    CONFIG_BLK_DEV_IDESCSI=m
    CONFIG_IDE_TASK_IOCTL=y

    #
    # IDE chipset support/bugfixes
    #
    CONFIG_IDE_GENERIC=m
    CONFIG_BLK_DEV_CMD640=y
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    CONFIG_BLK_DEV_OFFBOARD=y
    # CONFIG_BLK_DEV_GENERIC is not set
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_ATIIXP is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    CONFIG_BLK_DEV_HPT34X=y
    CONFIG_HPT34X_AUTODMA=y
    CONFIG_BLK_DEV_HPT366=y
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    # CONFIG_BLK_DEV_PDC202XX_NEW is not set
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_IDE_ARM is not set
    # CONFIG_IDE_CHIPSETS is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    CONFIG_SCSI=m
    CONFIG_SCSI_PROC_FS=y

    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=m
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=m
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m

    #
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    #
    CONFIG_SCSI_MULTI_LUN=y
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set

    #
    # SCSI Transport Attributes
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set

    #
    # SCSI low-level drivers
    #
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_7000FASST is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AHA152X is not set
    # CONFIG_SCSI_AHA1542 is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    # CONFIG_SCSI_AIC79XX is not set
    # CONFIG_SCSI_DPT_I2O is not set
    # CONFIG_SCSI_IN2000 is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_SCSI_SATA is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_DTC3280 is not set
    CONFIG_SCSI_EATA=m
    CONFIG_SCSI_EATA_TAGGED_QUEUE=y
    # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
    CONFIG_SCSI_EATA_MAX_TAGS=16
    # CONFIG_SCSI_EATA_PIO is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    CONFIG_SCSI_GDTH=m
    # CONFIG_SCSI_GENERIC_NCR5380 is not set
    # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_PPA is not set
    # CONFIG_SCSI_IMM is not set
    # CONFIG_SCSI_NCR53C406A is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_PAS16 is not set
    # CONFIG_SCSI_PSI240I is not set
    # CONFIG_SCSI_QLOGIC_FAS is not set
    # CONFIG_SCSI_QLOGIC_ISP is not set
    # CONFIG_SCSI_QLOGIC_FC is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    CONFIG_SCSI_QLA2XXX=m
    # CONFIG_SCSI_QLA21XX is not set
    # CONFIG_SCSI_QLA22XX is not set
    # CONFIG_SCSI_QLA2300 is not set
    # CONFIG_SCSI_QLA2322 is not set
    # CONFIG_SCSI_QLA6312 is not set
    # CONFIG_SCSI_SYM53C416 is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_T128 is not set
    # CONFIG_SCSI_U14_34F is not set
    # CONFIG_SCSI_ULTRASTOR is not set
    # CONFIG_SCSI_NSP32 is not set
    # CONFIG_SCSI_DEBUG is not set

    #
    # Old CD-ROM drivers (not SCSI, not IDE)
    #
    # CONFIG_CD_NO_IDESCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #
    # CONFIG_FUSION is not set

    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=m
    CONFIG_PACKET_MMAP=y
    CONFIG_NETLINK_DEV=m
    CONFIG_UNIX=y
    CONFIG_NET_KEY=m
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_TUNNEL is not set
    # CONFIG_IP_TCPDIAG is not set
    # CONFIG_IP_TCPDIAG_IPV6 is not set
    # CONFIG_IPV6 is not set
    # CONFIG_NETFILTER is not set
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    # CONFIG_IP_SCTP is not set
    CONFIG_ATM=m
    CONFIG_ATM_CLIP=m
    # CONFIG_ATM_CLIP_NO_ICMP is not set
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    CONFIG_ATM_BR2684_IPFILTER=y
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set

    #
    # QoS and/or fair queueing
    #
    # CONFIG_NET_SCHED is not set
    # CONFIG_NET_CLS_ROUTE is not set

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_ETHERTAP is not set
    # CONFIG_NET_SB1000 is not set

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=m
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_LANCE is not set
    # CONFIG_NET_VENDOR_SMC is not set
    # CONFIG_NET_VENDOR_RACAL is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_AT1700 is not set
    # CONFIG_DEPCA is not set
    # CONFIG_HP100 is not set
    # CONFIG_NET_ISA is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_AC3200 is not set
    # CONFIG_APRICOT is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_CS89x0 is not set
    # CONFIG_DGRS is not set
    CONFIG_EEPRO100=m
    CONFIG_E100=m
    # CONFIG_E100_NAPI is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_NET_POCKET is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_S2IO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # ATM drivers
    #
    CONFIG_ATM_TCP=m
    # CONFIG_ATM_LANAI is not set
    # CONFIG_ATM_ENI is not set
    # CONFIG_ATM_FIRESTREAM is not set
    # CONFIG_ATM_ZATM is not set
    # CONFIG_ATM_NICSTAR is not set
    # CONFIG_ATM_IDT77252 is not set
    # CONFIG_ATM_AMBASSADOR is not set
    # CONFIG_ATM_HORIZON is not set
    # CONFIG_ATM_IA is not set
    # CONFIG_ATM_FORE200E_MAYBE is not set
    # CONFIG_ATM_HE is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    CONFIG_PPP=m
    # CONFIG_PPP_MULTILINK is not set
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPPOE=m
    CONFIG_PPPOATM=m
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NETCONSOLE is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    # CONFIG_INPUT_TSDEV is not set
    CONFIG_INPUT_EVDEV=m
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=m
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PARKBD=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    CONFIG_SERIO_RAW=m

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=m
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=m
    CONFIG_MOUSE_SERIAL=m
    # CONFIG_MOUSE_INPORT is not set
    # CONFIG_MOUSE_LOGIBM is not set
    # CONFIG_MOUSE_PC110PAD is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_PCSPKR=m
    CONFIG_INPUT_UINPUT=m

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    # CONFIG_SERIAL_8250_MANY_PORTS is not set
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    # CONFIG_SERIAL_8250_DETECT_IRQ is not set
    # CONFIG_SERIAL_8250_MULTIPORT is not set
    # CONFIG_SERIAL_8250_RSA is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_LEGACY_PTYS=y
    CONFIG_LEGACY_PTY_COUNT=256
    CONFIG_PRINTER=m
    CONFIG_LP_CONSOLE=y
    CONFIG_PPDEV=m
    # CONFIG_TIPAR is not set

    #
    # IPMI
    #
    CONFIG_IPMI_HANDLER=m
    CONFIG_IPMI_PANIC_EVENT=y
    CONFIG_IPMI_PANIC_STRING=y
    CONFIG_IPMI_DEVICE_INTERFACE=m
    CONFIG_IPMI_SI=m
    CONFIG_IPMI_WATCHDOG=m
    # CONFIG_IPMI_POWEROFF is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=m
    CONFIG_NVRAM=m
    CONFIG_RTC=m
    CONFIG_GEN_RTC=m
    CONFIG_GEN_RTC_X=y
    CONFIG_DTLK=m
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=m
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    CONFIG_AGP_INTEL=m
    CONFIG_AGP_INTEL_MCH=m
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    CONFIG_AGP_VIA=m
    # CONFIG_AGP_EFFICEON is not set
    CONFIG_DRM=m
    # CONFIG_DRM_TDFX is not set
    # CONFIG_DRM_R128 is not set
    CONFIG_DRM_RADEON=m
    CONFIG_DRM_I810=m
    CONFIG_DRM_I830=m
    CONFIG_DRM_I915=m
    # CONFIG_DRM_MGA is not set
    # CONFIG_DRM_SIS is not set
    CONFIG_MWAVE=m
    CONFIG_RAW_DRIVER=m
    CONFIG_HPET=y
    CONFIG_HPET_RTC_IRQ=y
    CONFIG_HPET_MMAP=y
    CONFIG_MAX_RAW_DEVS=256
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # I2C support
    #
    CONFIG_I2C=m
    CONFIG_I2C_CHARDEV=m

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_ALGOPCF=m
    # CONFIG_I2C_ALGOPCA is not set

    #
    # I2C Hardware Bus support
    #
    CONFIG_I2C_ALI1535=m
    CONFIG_I2C_ALI1563=m
    CONFIG_I2C_ALI15X3=m
    CONFIG_I2C_AMD756=m
    # CONFIG_I2C_AMD756_S4882 is not set
    CONFIG_I2C_AMD8111=m
    # CONFIG_I2C_ELEKTOR is not set
    CONFIG_I2C_I801=m
    CONFIG_I2C_I810=m
    CONFIG_I2C_ISA=m
    CONFIG_I2C_NFORCE2=m
    CONFIG_I2C_PARPORT=m
    CONFIG_I2C_PARPORT_LIGHT=m
    CONFIG_I2C_PIIX4=m
    CONFIG_I2C_PROSAVAGE=m
    CONFIG_I2C_SAVAGE4=m
    # CONFIG_SCx200_ACB is not set
    CONFIG_I2C_SIS5595=m
    CONFIG_I2C_SIS630=m
    CONFIG_I2C_SIS96X=m
    # CONFIG_I2C_STUB is not set
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m
    CONFIG_I2C_VOODOO3=m
    # CONFIG_I2C_PCA_ISA is not set

    #
    # Hardware Sensors Chip support
    #
    CONFIG_I2C_SENSOR=m
    CONFIG_SENSORS_ADM1021=m
    CONFIG_SENSORS_ADM1025=m
    # CONFIG_SENSORS_ADM1026 is not set
    CONFIG_SENSORS_ADM1031=m
    CONFIG_SENSORS_ASB100=m
    CONFIG_SENSORS_DS1621=m
    CONFIG_SENSORS_FSCHER=m
    CONFIG_SENSORS_GL518SM=m
    CONFIG_SENSORS_IT87=m
    # CONFIG_SENSORS_LM63 is not set
    CONFIG_SENSORS_LM75=m
    CONFIG_SENSORS_LM77=m
    CONFIG_SENSORS_LM78=m
    CONFIG_SENSORS_LM80=m
    CONFIG_SENSORS_LM83=m
    CONFIG_SENSORS_LM85=m
    # CONFIG_SENSORS_LM87 is not set
    CONFIG_SENSORS_LM90=m
    CONFIG_SENSORS_MAX1619=m
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    CONFIG_SENSORS_VIA686A=m
    CONFIG_SENSORS_W83781D=m
    CONFIG_SENSORS_W83L785TS=m
    CONFIG_SENSORS_W83627HF=m

    #
    # Other I2C Chip support
    #
    CONFIG_SENSORS_EEPROM=m
    CONFIG_SENSORS_PCF8574=m
    CONFIG_SENSORS_PCF8591=m
    CONFIG_SENSORS_RTC8564=m
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_I2C_DEBUG_CHIP is not set

    #
    # Dallas's 1-wire bus
    #
    CONFIG_W1=m
    # CONFIG_W1_MATROX is not set
    # CONFIG_W1_DS9490 is not set
    CONFIG_W1_THERM=m
    # CONFIG_W1_SMEM is not set

    #
    # Misc devices
    #
    # CONFIG_IBM_ASM is not set

    #
    # Multimedia devices
    #
    # CONFIG_VIDEO_DEV is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set

    #
    # Graphics support
    #
    CONFIG_FB=y
    CONFIG_FB_MODE_HELPERS=y
    # CONFIG_FB_TILEBLITTING is not set
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    CONFIG_FB_VGA16=m
    CONFIG_FB_VESA=y
    CONFIG_VIDEO_SELECT=y
    CONFIG_FB_HGA=m
    # CONFIG_FB_HGA_ACCEL is not set
    # CONFIG_FB_RIVA is not set
    CONFIG_FB_I810=m
    # CONFIG_FB_I810_GTF is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON_OLD is not set
    CONFIG_FB_RADEON=m
    CONFIG_FB_RADEON_I2C=y
    # CONFIG_FB_RADEON_DEBUG is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_VIRTUAL is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_FRAMEBUFFER_CONSOLE=y
    CONFIG_FONTS=y
    CONFIG_FONT_8x8=y
    CONFIG_FONT_8x16=y
    # CONFIG_FONT_6x11 is not set
    # CONFIG_FONT_PEARL_8x8 is not set
    # CONFIG_FONT_ACORN_8x8 is not set
    # CONFIG_FONT_MINI_4x6 is not set
    # CONFIG_FONT_SUN8x16 is not set
    # CONFIG_FONT_SUN12x22 is not set

    #
    # Logo configuration
    #
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y

    #
    # Sound
    #
    CONFIG_SOUND=m

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_TIMER=m
    CONFIG_SND_PCM=m
    CONFIG_SND_RAWMIDI=m
    CONFIG_SND_SEQUENCER=m
    CONFIG_SND_SEQ_DUMMY=m
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    CONFIG_SND_MPU401_UART=m
    CONFIG_SND_DUMMY=m
    CONFIG_SND_VIRMIDI=m
    CONFIG_SND_MTPAV=m
    CONFIG_SND_SERIAL_U16550=m
    CONFIG_SND_MPU401=m

    #
    # ISA devices
    #
    # CONFIG_SND_AD1816A is not set
    # CONFIG_SND_AD1848 is not set
    # CONFIG_SND_CS4231 is not set
    # CONFIG_SND_CS4232 is not set
    # CONFIG_SND_CS4236 is not set
    # CONFIG_SND_ES968 is not set
    # CONFIG_SND_ES1688 is not set
    # CONFIG_SND_ES18XX is not set
    # CONFIG_SND_GUSCLASSIC is not set
    # CONFIG_SND_GUSEXTREME is not set
    # CONFIG_SND_GUSMAX is not set
    # CONFIG_SND_INTERWAVE is not set
    # CONFIG_SND_INTERWAVE_STB is not set
    # CONFIG_SND_OPTI92X_AD1848 is not set
    # CONFIG_SND_OPTI92X_CS4231 is not set
    # CONFIG_SND_OPTI93X is not set
    # CONFIG_SND_SB8 is not set
    # CONFIG_SND_SB16 is not set
    # CONFIG_SND_SBAWE is not set
    # CONFIG_SND_WAVEFRONT is not set
    # CONFIG_SND_ALS100 is not set
    # CONFIG_SND_AZT2320 is not set
    # CONFIG_SND_CMI8330 is not set
    # CONFIG_SND_DT019X is not set
    # CONFIG_SND_OPL3SA2 is not set
    # CONFIG_SND_SGALAXY is not set
    # CONFIG_SND_SSCAPE is not set

    #
    # PCI devices
    #
    CONFIG_SND_AC97_CODEC=m
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=m
    CONFIG_SND_INTEL8X0M=m
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_VIA82XX is not set
    CONFIG_SND_VIA82XX_MODEM=m
    # CONFIG_SND_VX222 is not set

    #
    # USB devices
    #
    CONFIG_SND_USB_AUDIO=m
    # CONFIG_SND_USB_USX2Y is not set

    #
    # Open Sound System
    #
    CONFIG_SOUND_PRIME=m
    # CONFIG_SOUND_BT878 is not set
    # CONFIG_SOUND_CMPCI is not set
    # CONFIG_SOUND_EMU10K1 is not set
    # CONFIG_SOUND_FUSION is not set
    # CONFIG_SOUND_CS4281 is not set
    # CONFIG_SOUND_ES1370 is not set
    # CONFIG_SOUND_ES1371 is not set
    # CONFIG_SOUND_ESSSOLO1 is not set
    # CONFIG_SOUND_MAESTRO is not set
    # CONFIG_SOUND_MAESTRO3 is not set
    CONFIG_SOUND_ICH=m
    # CONFIG_SOUND_SONICVIBES is not set
    # CONFIG_SOUND_TRIDENT is not set
    # CONFIG_SOUND_MSNDCLAS is not set
    # CONFIG_SOUND_MSNDPIN is not set
    # CONFIG_SOUND_VIA82CXXX is not set
    CONFIG_SOUND_OSS=m
    # CONFIG_SOUND_TRACEINIT is not set
    CONFIG_SOUND_DMAP=y
    # CONFIG_SOUND_AD1816 is not set
    # CONFIG_SOUND_AD1889 is not set
    # CONFIG_SOUND_SGALAXY is not set
    # CONFIG_SOUND_ADLIB is not set
    # CONFIG_SOUND_ACI_MIXER is not set
    # CONFIG_SOUND_CS4232 is not set
    # CONFIG_SOUND_SSCAPE is not set
    # CONFIG_SOUND_GUS is not set
    CONFIG_SOUND_VMIDI=m
    # CONFIG_SOUND_TRIX is not set
    CONFIG_SOUND_MSS=m
    CONFIG_SOUND_MPU401=m
    # CONFIG_SOUND_NM256 is not set
    # CONFIG_SOUND_MAD16 is not set
    # CONFIG_SOUND_PAS is not set
    # CONFIG_SOUND_PSS is not set
    CONFIG_SOUND_SB=m
    # CONFIG_SOUND_AWE32_SYNTH is not set
    # CONFIG_SOUND_WAVEFRONT is not set
    # CONFIG_SOUND_MAUI is not set
    # CONFIG_SOUND_YM3812 is not set
    # CONFIG_SOUND_OPL3SA1 is not set
    # CONFIG_SOUND_OPL3SA2 is not set
    # CONFIG_SOUND_YMFPCI is not set
    CONFIG_SOUND_UART6850=m
    # CONFIG_SOUND_AEDSP16 is not set
    # CONFIG_SOUND_TVMIXER is not set
    # CONFIG_SOUND_KAHLUA is not set
    # CONFIG_SOUND_ALI5455 is not set
    # CONFIG_SOUND_FORTE is not set
    # CONFIG_SOUND_RME96XX is not set
    # CONFIG_SOUND_AD1980 is not set

    #
    # USB support
    #
    CONFIG_USB=m
    CONFIG_USB_DEBUG=y

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    CONFIG_USB_DYNAMIC_MINORS=y
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=m
    CONFIG_USB_EHCI_SPLIT_ISO=y
    CONFIG_USB_EHCI_ROOT_HUB_TT=y
    CONFIG_USB_OHCI_HCD=m
    CONFIG_USB_UHCI_HCD=m
    # CONFIG_USB_SL811_HCD is not set

    #
    # USB Device Class drivers
    #
    CONFIG_USB_AUDIO=m
    CONFIG_USB_BLUETOOTH_TTY=m
    CONFIG_USB_MIDI=m
    CONFIG_USB_ACM=m
    CONFIG_USB_PRINTER=m

    #
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed;
    see USB_STORAGE Help for more information
    #
    CONFIG_USB_STORAGE=m
    # CONFIG_USB_STORAGE_DEBUG is not set
    CONFIG_USB_STORAGE_RW_DETECT=y
    CONFIG_USB_STORAGE_DATAFAB=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_ISD200=y
    CONFIG_USB_STORAGE_DPCM=y
    CONFIG_USB_STORAGE_HP8200e=y
    CONFIG_USB_STORAGE_SDDR09=y
    CONFIG_USB_STORAGE_SDDR55=y
    CONFIG_USB_STORAGE_JUMPSHOT=y

    #
    # USB Input Devices
    #
    CONFIG_USB_HID=m
    CONFIG_USB_HIDINPUT=y
    CONFIG_HID_FF=y
    CONFIG_HID_PID=y
    CONFIG_LOGITECH_FF=y
    CONFIG_THRUSTMASTER_FF=y
    CONFIG_USB_HIDDEV=y

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    CONFIG_USB_AIPTEK=m
    CONFIG_USB_WACOM=m
    CONFIG_USB_KBTAB=m
    CONFIG_USB_POWERMATE=m
    CONFIG_USB_MTOUCH=m
    CONFIG_USB_EGALAX=m
    CONFIG_USB_XPAD=m
    CONFIG_USB_ATI_REMOTE=m

    #
    # USB Imaging devices
    #
    CONFIG_USB_MDC800=m
    CONFIG_USB_MICROTEK=m

    #
    # USB Multimedia devices
    #
    CONFIG_USB_DABUSB=m

    #
    # Video4Linux support is needed for USB Multimedia device support
    #

    #
    # USB Network Adapters
    #
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m

    #
    # USB Host-to-Host Cables
    #
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_GENESYS=y
    CONFIG_USB_NET1080=y
    CONFIG_USB_PL2301=y
    CONFIG_USB_KC2190=y

    #
    # Intelligent USB Devices/Gadgets
    #
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_ZAURUS=y
    CONFIG_USB_CDCETHER=y

    #
    # USB Network Adapters
    #
    CONFIG_USB_AX8817X=y

    #
    # USB port drivers
    #
    CONFIG_USB_USS720=m

    #
    # USB Serial Converter support
    #
    CONFIG_USB_SERIAL=m
    CONFIG_USB_SERIAL_GENERIC=y
    CONFIG_USB_SERIAL_BELKIN=m
    CONFIG_USB_SERIAL_WHITEHEAT=m
    CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
    CONFIG_USB_SERIAL_CYPRESS_M8=m
    CONFIG_USB_SERIAL_EMPEG=m
    CONFIG_USB_SERIAL_FTDI_SIO=m
    CONFIG_USB_SERIAL_VISOR=m
    CONFIG_USB_SERIAL_IPAQ=m
    CONFIG_USB_SERIAL_IR=m
    CONFIG_USB_SERIAL_EDGEPORT=m
    CONFIG_USB_SERIAL_EDGEPORT_TI=m
    CONFIG_USB_SERIAL_GARMIN=m
    CONFIG_USB_SERIAL_IPW=m
    CONFIG_USB_SERIAL_KEYSPAN_PDA=m
    CONFIG_USB_SERIAL_KEYSPAN=m
    # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
    # CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
    CONFIG_USB_SERIAL_KLSI=m
    CONFIG_USB_SERIAL_KOBIL_SCT=m
    CONFIG_USB_SERIAL_MCT_U232=m
    CONFIG_USB_SERIAL_PL2303=m
    CONFIG_USB_SERIAL_SAFE=m
    CONFIG_USB_SERIAL_SAFE_PADDED=y
    CONFIG_USB_SERIAL_TI=m
    CONFIG_USB_SERIAL_CYBERJACK=m
    CONFIG_USB_SERIAL_XIRCOM=m
    CONFIG_USB_SERIAL_OMNINET=m
    CONFIG_USB_EZUSB=y

    #
    # USB Miscellaneous drivers
    #
    CONFIG_USB_EMI62=m
    CONFIG_USB_EMI26=m
    CONFIG_USB_AUERSWALD=m
    CONFIG_USB_RIO500=m
    CONFIG_USB_LEGOTOWER=m
    CONFIG_USB_LCD=m
    CONFIG_USB_LED=m
    CONFIG_USB_CYTHERM=m
    CONFIG_USB_PHIDGETKIT=m
    CONFIG_USB_PHIDGETSERVO=m
    CONFIG_USB_TEST=m

    #
    # USB ATM/DSL drivers
    #
    CONFIG_USB_ATM=m
    CONFIG_USB_SPEEDTOUCH=m

    #
    # USB Gadget Support
    #
    # CONFIG_USB_GADGET is not set

    #
    # MMC/SD Card support
    #
    # CONFIG_MMC is not set

    #
    # InfiniBand support
    #
    # CONFIG_INFINIBAND is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    # CONFIG_EXT2_FS_POSIX_ACL is not set
    # CONFIG_EXT2_FS_SECURITY is not set
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    CONFIG_JBD=m
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    CONFIG_ROMFS_FS=m
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=m

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=m
    CONFIG_UDF_FS=m
    CONFIG_UDF_NLS=y

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    CONFIG_MSDOS_FS=m
    CONFIG_VFAT_FS=m
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    # CONFIG_NTFS_RW is not set

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_SYSFS=y
    # CONFIG_DEVFS_FS is not set
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_XATTR is not set
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    # CONFIG_NFS_FS is not set
    # CONFIG_NFSD is not set
    # CONFIG_EXPORTFS is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    # CONFIG_MAC_PARTITION is not set
    CONFIG_MSDOS_PARTITION=y
    # CONFIG_BSD_DISKLABEL is not set
    # CONFIG_MINIX_SUBPARTITION is not set
    # CONFIG_SOLARIS_X86_PARTITION is not set
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    # CONFIG_EFI_PARTITION is not set

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=m
    CONFIG_NLS_CODEPAGE_852=m
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    CONFIG_NLS_CODEPAGE_1250=m
    CONFIG_NLS_CODEPAGE_1251=m
    CONFIG_NLS_ASCII=m
    CONFIG_NLS_ISO8859_1=m
    CONFIG_NLS_ISO8859_2=m
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=m
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=m

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    # CONFIG_DEBUG_KERNEL is not set
    # CONFIG_DEBUG_PREEMPT is not set
    # CONFIG_DEBUG_BUGVERBOSE is not set
    CONFIG_FRAME_POINTER=y
    # CONFIG_EARLY_PRINTK is not set
    CONFIG_4KSTACKS=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y

    #
    # Security options
    #
    # CONFIG_KEYS is not set
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    # CONFIG_CRYPTO_HMAC is not set
    CONFIG_CRYPTO_NULL=m
    # CONFIG_CRYPTO_MD4 is not set
    CONFIG_CRYPTO_MD5=m
    # CONFIG_CRYPTO_SHA1 is not set
    # CONFIG_CRYPTO_SHA256 is not set
    # CONFIG_CRYPTO_SHA512 is not set
    # CONFIG_CRYPTO_WP512 is not set
    CONFIG_CRYPTO_DES=m
    # CONFIG_CRYPTO_BLOWFISH is not set
    # CONFIG_CRYPTO_TWOFISH is not set
    # CONFIG_CRYPTO_SERPENT is not set
    # CONFIG_CRYPTO_AES_586 is not set
    # CONFIG_CRYPTO_CAST5 is not set
    # CONFIG_CRYPTO_CAST6 is not set
    # CONFIG_CRYPTO_TEA is not set
    # CONFIG_CRYPTO_ARC4 is not set
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    # CONFIG_CRYPTO_DEFLATE is not set
    # CONFIG_CRYPTO_MICHAEL_MIC is not set
    # CONFIG_CRYPTO_CRC32C is not set
    # CONFIG_CRYPTO_TEST is not set

    #
    # Hardware crypto devices
    #
    # CONFIG_CRYPTO_DEV_PADLOCK is not set

    #
    # Library routines
    #
    CONFIG_CRC_CCITT=m
    CONFIG_CRC32=y
    CONFIG_LIBCRC32C=m
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_X86_BIOS_REBOOT=y


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:09    [W:0.141 / U:121.832 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site