lkml.org 
[lkml]   [2005]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectBad disks or bug ?
Hello,

i have a little doubt on the following....

/> Sep 10 12:50:30 abivrs0 kernel: hdb: dma_intr: status=0x51 { DriveReady /
/> SeekComplete Error } /
/> Sep 10 12:50:30 abivrs0 kernel: hdb: dma_intr: error=0x40 /
////

...Of course the explanation of such an error is that drive has bad
sectors and i'd better change it BUT:

I have many production servers running 2.4.27, everything seems OK while
they're new.
After about an year of production many of them (5 of them at present)
begin to show the problem BUT:

1) All of them show the problem on hdb (ALL OF THEM)
2) Never had problems on hda on ANY server, disks are the same, same
size, same partitioning
3) Typically hdb is used as a disk mirror
4) Many times a mkfs.ext3 -c -c solves the problem bringing bad sectors
to a new life !

How do you explain that ? Overload on hdb due to mirroring and surface
degradation ?
OR a kind of vodoo on my hdbs ?

NOTE: Over the internet, when i searched for such errors on disks (not
ramdisks or loop devs) i ALWAYS found problems on hdb !!!

Could it be depending on master-slave configuration ? Kernel bug ? Other ?

What do you say ?

thanks for your time,

Gianluca Alberici

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:09    [W:0.045 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site