Messages in this thread |  | | | Date | Wed, 15 Sep 2004 08:18:25 +0200 | | From | Soeren Sonnenburg <> | | Subject | Re: pdc202xx_new + software raid0 freezes on array writes |
On Tue, 14 Sep 2004 16:05:30 +0000, Peter Mc Aulay wrote: > Hi... > > [NOTE: Please CC replies to me personally as I'm not a list subscriber. > Thank you.] > > I was wondering if anyone could help me at all with a little problem I'm > having. > > I have 4 Western Digital 200GB hard disks (WDC WD2000JB) in a software > RAID0 setup, two each connected to a Promise Ultra100TX2 (PDC20268) and > an Ultra133TX2 (PDC20269) (pdc202XX_new driver compiled into the > kernel). The system itself is a K6-2 450Mhz CPU on an ATX mainboard of > unknown brand using the ALi M1541/5229 chipset (ALI15X3). It boots from > a seperate Seagate (ST38410A) hard disk connected to the on-board > controller.
I had the very same problems with the pdc20268 and also reported them (that was 1-2 years ago)... I threw them away now and replaced them with some hpt370 controllers... then also the problems went away...
However I found that using some device on the secondary controller and accessing that one makes it freeze already...
Soeren - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |