lkml.org 
[lkml]   [2004]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[patch 08/25] drivers/char/riscom8.c MIN/MAX removal
From
Date


Patch (against 2.6.7) removes unnecessary min/max macros and changes
calls to use kernel.h macros instead.

Feedback is always welcome
Michael

Signed-off-by: Maximilian Attems <janitor@sternwelten.at>



---

linux-2.6.9-rc1-bk7-max/drivers/char/riscom8.c | 20 ++++++++------------
1 files changed, 8 insertions(+), 12 deletions(-)

diff -puN drivers/char/riscom8.c~min-max-char_riscom8 drivers/char/riscom8.c
--- linux-2.6.9-rc1-bk7/drivers/char/riscom8.c~min-max-char_riscom8 2004-09-01 19:34:08.000000000 +0200
+++ linux-2.6.9-rc1-bk7-max/drivers/char/riscom8.c 2004-09-01 19:34:08.000000000 +0200
@@ -75,10 +75,6 @@
ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)

-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
#define RS_EVENT_WRITE_WAKEUP 0

static struct riscom_board * IRQ_to_board[16];
@@ -107,7 +103,7 @@ static struct riscom_board rc_board[RC_N
};

static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
-
+
/* RISCom/8 I/O ports addresses (without address translation) */
static unsigned short rc_ioport[] = {
#if 1
@@ -483,7 +479,7 @@ static inline void rc_transmit(struct ri
rc_out(bp, CD180_TDR, CD180_C_SBRK);
port->COR2 &= ~COR2_ETC;
}
- count = MIN(port->break_length, 0xff);
+ count = min_t(int, port->break_length, 0xff);
rc_out(bp, CD180_TDR, CD180_C_ESC);
rc_out(bp, CD180_TDR, CD180_C_DELAY);
rc_out(bp, CD180_TDR, count);
@@ -1165,8 +1161,8 @@ static int rc_write(struct tty_struct *
down(&tmp_buf_sem);
while (1) {
cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - port->xmit_head));
if (c <= 0)
break;

@@ -1178,8 +1174,8 @@ static int rc_write(struct tty_struct *
}

cli();
- c = MIN(c, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
+ c = min_t(c, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - port->xmit_head));
memcpy(port->xmit_buf + port->xmit_head, tmp_buf, c);
port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
port->xmit_cnt += c;
@@ -1193,8 +1189,8 @@ static int rc_write(struct tty_struct *
} else {
while (1) {
cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - port->xmit_head));
if (c <= 0) {
restore_flags(flags);
break;
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:05    [W:0.915 / U:1.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site