lkml.org 
[lkml]   [2004]   [Aug]   [10]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
DateTue, 10 Aug 2004 09:58:16 +0200
From"Harald Küthe" <>
Subject[PATCH][PPC32] 2.4.27: fixes for 8xx fec.c
Hi

I found two problems concerning the fast ethernet driver 
for ppc 8xx processors (fec.c) in linux kernel version 2.4.26/27 
and I think in the 2.6 series as well (not confirmed).

First problem is only when CONFIG_USE_MDIO is __not__ set.
How to reproduce:
start the system with fec ethernet, everything works, 
issue a ifconfig ethX down and ifconfig ethX up and ethernet is not working anymore.
Fix (or at least a workaround). In fec_enet_open() add a fec_restart() at the end 
if CONFIG_USE_MDIO is not set.

2nd problem is with CONFIG_USE_MDIO set: 
The promiscuous mode/multicast settings are getting lost if link status changes occurs 
How to reproduce:
build a bridge with the fec device. Then simply unplug and replug the ethernet cable. 
fec_restart() is called which idles all promiscuous mode/multicast settings.
The bridge will then only forward broadcast frames because the promiscuous setting is lost.
Fix: call set_multicast_list(dev) at the end of fec_restart() before ethernet is reenabled.

If there are more questions please write back.

Please CC me as I'm not subscribed to the lists

Regards
Harald


Here are the fixes:

diff -urN linux-2.4.27.orig/arch/ppc/8xx_io/fec.c linux-2.4.27/arch/ppc/8xx_io/fec.c
--- linux-2.4.27.orig/arch/ppc/8xx_io/fec.c	2003-11-28 19:26:18.000000000 +0100
+++ linux-2.4.27/arch/ppc/8xx_io/fec.c	2004-08-10 09:16:00.000000000 +0200
@@ -1466,6 +1466,11 @@
 	return -ENODEV;		/* No PHY we understand */
 #else
 	fep->link = 1;
+
+#ifndef	CONFIG_USE_MDIO
+	fec_restart (dev, 0);
+#endif
+
 	netif_start_queue(dev);
 	return 0;	/* Success */
 #endif	/* CONFIG_USE_MDIO */
@@ -2049,6 +2054,9 @@
 	fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
 			    FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
 
+	/* set old promiscuous/multicast settings which are lost above */
+	set_multicast_list(dev);
+
 	/* And last, enable the transmit and receive processing.
 	*/
 	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN; 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:05    [from the cache]
©2003-2008