Messages in this thread Patch in this message | | | Date | Sun, 4 Jul 2004 16:15:09 +0100 | From | Christoph Hellwig <> | Subject | Re: 2.6.7: sk98lin unload oops |
| |
> Fortunality everything still works fine (I'm running the script over the > network of the syskonnect cards). > > This machine has two of those syskonnect cards, on another machine which has > only one syskonnect card this oops doesn't occur.
As a colleteral damage the following huge patch should fix it, and I need testers for it anyway ;-)
--- 1.39/drivers/net/sk98lin/skge.c 2004-07-02 10:43:46 +02:00 +++ edited/drivers/net/sk98lin/skge.c 2004-07-03 22:00:05 +02:00 @@ -239,7 +239,7 @@ #ifdef CONFIG_PROC_FS static const char SK_Root_Dir_entry[] = "sk98lin"; -static struct proc_dir_entry *pSkRootDir = NULL; +static struct proc_dir_entry *pSkRootDir; extern struct file_operations sk_proc_fops; #endif @@ -255,303 +255,13 @@ #endif /* global variables *********************************************************/ -static const char *BootString = BOOT_STRING; struct SK_NET_DEVICE *SkGeRootDev = NULL; -static int probed __initdata = 0; static SK_BOOL DoPrintInterfaceChange = SK_TRUE; /* local variables **********************************************************/ static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}}; static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; - -#ifdef CONFIG_PROC_FS -static struct proc_dir_entry *pSkRootDir; -#endif - - - -/***************************************************************************** - * - * skge_probe - find all SK-98xx adapters - * - * Description: - * This function scans the PCI bus for SK-98xx adapters. Resources for - * each adapter are allocated and the adapter is brought into Init 1 - * state. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int __init skge_probe (void) -{ - int boards_found = 0; - int vendor_flag = SK_FALSE; - SK_AC *pAC; - DEV_NET *pNet = NULL; - struct pci_dev *pdev = NULL; - struct SK_NET_DEVICE *dev = NULL; - SK_BOOL DeviceFound = SK_FALSE; - SK_BOOL BootStringCount = SK_FALSE; - int retval; -#ifdef CONFIG_PROC_FS - struct proc_dir_entry *pProcFile; -#endif - - if (probed) - return -ENODEV; - probed++; - - - while((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev))) { - - if (pci_enable_device(pdev)) { - continue; - } - dev = NULL; - pNet = NULL; - - /* Don't handle Yukon2 cards at the moment */ - /* 12-feb-2004 ---- mlindner@syskonnect.de */ - if (pdev->vendor == 0x11ab) { - if ( (pdev->device == 0x4360) || (pdev->device == 0x4361) ) - continue; - } - - SK_PCI_ISCOMPLIANT(vendor_flag, pdev); - if (!vendor_flag) - continue; - - /* Configure DMA attributes. */ - if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) && - pci_set_dma_mask(pdev, (u64) 0xffffffff)) - continue; - - - if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) { - printk(KERN_ERR "Unable to allocate etherdev " - "structure!\n"); - break; - } - - pNet = dev->priv; - pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL); - if (pNet->pAC == NULL){ - free_netdev(dev); - printk(KERN_ERR "Unable to allocate adapter " - "structure!\n"); - break; - } - - /* Print message */ - if (!BootStringCount) { - /* set display flag to TRUE so that */ - /* we only display this string ONCE */ - BootStringCount = SK_TRUE; - printk("%s\n", BootString); - } - - memset(pNet->pAC, 0, sizeof(SK_AC)); - pAC = pNet->pAC; - pAC->PciDev = pdev; - pAC->PciDevId = pdev->device; - pAC->dev[0] = dev; - pAC->dev[1] = dev; - sprintf(pAC->Name, "SysKonnect SK-98xx"); - pAC->CheckQueue = SK_FALSE; - - pNet->Mtu = 1500; - pNet->Up = 0; - dev->irq = pdev->irq; - retval = SkGeInitPCI(pAC); - if (retval) { - printk("SKGE: PCI setup failed: %i\n", retval); - free_netdev(dev); - continue; - } - - SET_MODULE_OWNER(dev); - dev->open = &SkGeOpen; - dev->stop = &SkGeClose; - dev->hard_start_xmit = &SkGeXmit; - dev->get_stats = &SkGeStats; - dev->last_stats = &SkGeStats; - dev->set_multicast_list = &SkGeSetRxMode; - dev->set_mac_address = &SkGeSetMacAddr; - dev->do_ioctl = &SkGeIoctl; - dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; - SET_NETDEV_DEV(dev, &pdev->dev); - -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM - - if (pAC->ChipsetType) { - /* Use only if yukon hardware */ - /* SK and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } -#endif -#endif - - pAC->Index = boards_found; - - if (SkGeBoardInit(dev, pAC)) { - free_netdev(dev); - continue; - } - - /* Register net device */ - if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); - FreeResources(dev); - free_netdev(dev); - continue; - } - - /* Print adapter specific string from vpd */ - ProductStr(pAC); - printk("%s: %s\n", dev->name, pAC->DeviceStr); - - /* Print configuration settings */ - printk(" PrefPort:%c RlmtMode:%s\n", - 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, - (pAC->RlmtMode==0) ? "Check Link State" : - ((pAC->RlmtMode==1) ? "Check Link State" : - ((pAC->RlmtMode==3) ? "Check Local Port" : - ((pAC->RlmtMode==7) ? "Check Segmentation" : - ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); - - SkGeYellowLED(pAC, pAC->IoBase, 1); - - - memcpy((caddr_t) &dev->dev_addr, - (caddr_t) &pAC->Addr.Net[0].CurrentMacAddress, 6); - - /* First adapter... Create proc and print message */ -#ifdef CONFIG_PROC_FS - if (!DeviceFound) { - DeviceFound = SK_TRUE; - SK_MEMCPY(&SK_Root_Dir_entry, BootString, - sizeof(SK_Root_Dir_entry) - 1); - - /*Create proc (directory)*/ - if(!pSkRootDir) { - pSkRootDir = proc_mkdir(SK_Root_Dir_entry, proc_net); - if (!pSkRootDir) { - printk(KERN_WARNING "%s: Unable to create /proc/net/%s", - dev->name, SK_Root_Dir_entry); - } else { - pSkRootDir->owner = THIS_MODULE; - } - } - } - - /* Create proc file */ - if (pSkRootDir && - (pProcFile = create_proc_entry(dev->name, S_IRUGO, - pSkRootDir))) { - pProcFile->proc_fops = &sk_proc_fops; - pProcFile->data = dev; - } - -#endif - - pNet->PortNr = 0; - pNet->NetNr = 0; - - boards_found++; - - /* More then one port found */ - if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) { - printk(KERN_ERR "Unable to allocate etherdev " - "structure!\n"); - break; - } - - pAC->dev[1] = dev; - pNet = dev->priv; - pNet->PortNr = 1; - pNet->NetNr = 1; - pNet->pAC = pAC; - pNet->Mtu = 1500; - pNet->Up = 0; - - dev->open = &SkGeOpen; - dev->stop = &SkGeClose; - dev->hard_start_xmit = &SkGeXmit; - dev->get_stats = &SkGeStats; - dev->last_stats = &SkGeStats; - dev->set_multicast_list = &SkGeSetRxMode; - dev->set_mac_address = &SkGeSetMacAddr; - dev->do_ioctl = &SkGeIoctl; - dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; - -#ifdef SK_ZEROCOPY -#ifdef USE_SK_TX_CHECKSUM - if (pAC->ChipsetType) { - /* SG and ZEROCOPY - fly baby... */ - dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } -#endif -#endif - - if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); - free_netdev(dev); - pAC->dev[1] = pAC->dev[0]; - } else { -#ifdef CONFIG_PROC_FS - if (pSkRootDir - && (pProcFile = create_proc_entry(dev->name, - S_IRUGO, pSkRootDir))) { - pProcFile->proc_fops = &sk_proc_fops; - pProcFile->data = dev; - } -#endif - - memcpy((caddr_t) &dev->dev_addr, - (caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6); - - printk("%s: %s\n", dev->name, pAC->DeviceStr); - printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); - } - } - - /* Save the hardware revision */ - pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + - (pAC->GIni.GIPciHwRev & 0x0F); - - /* Set driver globals */ - pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME; - pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE; - - SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA)); - SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), - sizeof(SK_PNMI_STRUCT_DATA)); - - /* - * This is bollocks, but we need to tell the net-init - * code that it shall go for the next device. - */ -#ifndef MODULE - dev->base_addr = 0; -#endif - } - - /* - * If we're at this point we're going through skge_probe() for - * the first time. Return success (0) if we've initialized 1 - * or more boards. Otherwise, return failure (-ENODEV). - */ - - return boards_found; -} /* skge_probe */ - - /***************************************************************************** * * SkGeInitPCI - Init the PCI resources @@ -666,9 +376,6 @@ MODULE_PARM(ConType, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s"); MODULE_PARM(PrefPort, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s"); MODULE_PARM(RlmtMode, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s"); -/* not used, just there because every driver should have them: */ -MODULE_PARM(options, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i"); -MODULE_PARM(debug, "i"); /* used for interrupt moderation */ MODULE_PARM(IntsPerSec, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "i"); MODULE_PARM(Moderation, "1-" __MODULE_STRING(SK_MAX_CARD_PARAM) "s"); @@ -755,123 +462,12 @@ static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", }; #endif -static int debug = 0; /* not used */ -static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */ - static int IntsPerSec[SK_MAX_CARD_PARAM]; static char *Moderation[SK_MAX_CARD_PARAM]; static char *ModerationMask[SK_MAX_CARD_PARAM]; static char *AutoSizing[SK_MAX_CARD_PARAM]; static char *Stats[SK_MAX_CARD_PARAM]; - -/***************************************************************************** - * - * skge_init_module - module initialization function - * - * Description: - * Very simple, only call skge_probe and return approriate result. - * - * Returns: - * 0, if everything is ok - * !=0, on error - */ -static int __init skge_init_module(void) -{ - int cards; - SkGeRootDev = NULL; - - /* just to avoid warnings ... */ - debug = 0; - options[0] = 0; - - cards = skge_probe(); - if (cards == 0) { - printk("sk98lin: No adapter found.\n"); - } - return cards ? 0 : -ENODEV; -} /* skge_init_module */ - - -/***************************************************************************** - * - * skge_cleanup_module - module unload function - * - * Description: - * Disable adapter if it is still running, free resources, - * free device struct. - * - * Returns: N/A - */ -static void __exit skge_cleanup_module(void) -{ -DEV_NET *pNet; -SK_AC *pAC; -struct SK_NET_DEVICE *next; -unsigned long Flags; -SK_EVPARA EvPara; - - while (SkGeRootDev) { - pNet = (DEV_NET*) SkGeRootDev->priv; - pAC = pNet->pAC; - next = pAC->Next; - - netif_stop_queue(SkGeRootDev); - SkGeYellowLED(pAC, pAC->IoBase, 0); - - if(pAC->BoardLevel == SK_INIT_RUN) { - /* board is still alive */ - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - EvPara.Para32[0] = 0; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - EvPara.Para32[0] = 1; - EvPara.Para32[1] = -1; - SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); - SkEventDispatcher(pAC, pAC->IoBase); - /* disable interrupts */ - SK_OUT32(pAC->IoBase, B0_IMSK, 0); - SkGeDeInit(pAC, pAC->IoBase); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - pAC->BoardLevel = SK_INIT_DATA; - /* We do NOT check here, if IRQ was pending, of course*/ - } - - if(pAC->BoardLevel == SK_INIT_IO) { - /* board is still alive */ - SkGeDeInit(pAC, pAC->IoBase); - pAC->BoardLevel = SK_INIT_DATA; - } - - if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 2){ - unregister_netdev(pAC->dev[1]); - free_netdev(pAC->dev[1]); - } - - FreeResources(SkGeRootDev); - - SkGeRootDev->get_stats = NULL; - /* - * otherwise unregister_netdev calls get_stats with - * invalid IO ... :-( - */ - unregister_netdev(SkGeRootDev); - free_netdev(SkGeRootDev); - kfree(pAC); - SkGeRootDev = next; - } - -#ifdef CONFIG_PROC_FS - /* clear proc-dir */ - remove_proc_entry(pSkRootDir->name, proc_net); -#endif - -} /* skge_cleanup_module */ - -module_init(skge_init_module); -module_exit(skge_cleanup_module); - - /***************************************************************************** * * SkGeBoardInit - do level 0 and 1 initialization @@ -5311,8 +4907,316 @@ #endif -/******************************************************************************* - * - * End of file - * - ******************************************************************************/ +static int __devinit skge_probe_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + SK_AC *pAC; + DEV_NET *pNet = NULL; + struct net_device *dev = NULL; +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *pProcFile; +#endif + static int boards_found = 0; + int error = -ENODEV; + + if (pci_enable_device(pdev)) + goto out; + + /* Configure DMA attributes. */ + if (pci_set_dma_mask(pdev, (u64) 0xffffffffffffffffULL) && + pci_set_dma_mask(pdev, (u64) 0xffffffff)) + goto out_disable_device; + + + if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) { + printk(KERN_ERR "Unable to allocate etherdev " + "structure!\n"); + goto out_disable_device; + } + + pNet = dev->priv; + pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL); + if (!pNet->pAC) { + printk(KERN_ERR "Unable to allocate adapter " + "structure!\n"); + goto out_free_netdev; + } + + memset(pNet->pAC, 0, sizeof(SK_AC)); + pAC = pNet->pAC; + pAC->PciDev = pdev; + pAC->PciDevId = pdev->device; + pAC->dev[0] = dev; + pAC->dev[1] = dev; + sprintf(pAC->Name, "SysKonnect SK-98xx"); + pAC->CheckQueue = SK_FALSE; + + pNet->Mtu = 1500; + pNet->Up = 0; + dev->irq = pdev->irq; + error = SkGeInitPCI(pAC); + if (error) { + printk("SKGE: PCI setup failed: %i\n", error); + goto out_free_netdev; + } + + SET_MODULE_OWNER(dev); + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->last_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; + dev->flags &= ~IFF_RUNNING; + SET_NETDEV_DEV(dev, &pdev->dev); + +#ifdef SK_ZEROCOPY +#ifdef USE_SK_TX_CHECKSUM + if (pAC->ChipsetType) { + /* Use only if yukon hardware */ + /* SK and ZEROCOPY - fly baby... */ + dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + } +#endif +#endif + + pAC->Index = boards_found++; + + if (SkGeBoardInit(dev, pAC)) + goto out_free_netdev; + + /* Register net device */ + if (register_netdev(dev)) { + printk(KERN_ERR "SKGE: Could not register device.\n"); + goto out_free_resources; + } + + /* Print adapter specific string from vpd */ + ProductStr(pAC); + printk("%s: %s\n", dev->name, pAC->DeviceStr); + + /* Print configuration settings */ + printk(" PrefPort:%c RlmtMode:%s\n", + 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, + (pAC->RlmtMode==0) ? "Check Link State" : + ((pAC->RlmtMode==1) ? "Check Link State" : + ((pAC->RlmtMode==3) ? "Check Local Port" : + ((pAC->RlmtMode==7) ? "Check Segmentation" : + ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); + + SkGeYellowLED(pAC, pAC->IoBase, 1); + + + memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); + +#ifdef CONFIG_PROC_FS + pProcFile = create_proc_entry(dev->name, S_IRUGO, pSkRootDir); + if (pProcFile) { + pProcFile->proc_fops = &sk_proc_fops; + pProcFile->data = dev; + pProcFile->owner = THIS_MODULE; + } +#endif + + pNet->PortNr = 0; + pNet->NetNr = 0; + + boards_found++; + + /* More then one port found */ + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) { + printk(KERN_ERR "Unable to allocate etherdev " + "structure!\n"); + goto out; + } + + pAC->dev[1] = dev; + pNet = dev->priv; + pNet->PortNr = 1; + pNet->NetNr = 1; + pNet->pAC = pAC; + pNet->Mtu = 1500; + pNet->Up = 0; + + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->last_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; + dev->flags &= ~IFF_RUNNING; + +#ifdef SK_ZEROCOPY +#ifdef USE_SK_TX_CHECKSUM + if (pAC->ChipsetType) { + /* SG and ZEROCOPY - fly baby... */ + dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + } +#endif +#endif + + if (register_netdev(dev)) { + printk(KERN_ERR "SKGE: Could not register device.\n"); + free_netdev(dev); + pAC->dev[1] = pAC->dev[0]; + } else { +#ifdef CONFIG_PROC_FS + pProcFile = create_proc_entry(dev->name, S_IRUGO, + pSkRootDir); + if (pProcFile) { + pProcFile->proc_fops = &sk_proc_fops; + pProcFile->data = dev; + pProcFile->owner = THIS_MODULE; + } +#endif + + memcpy(&dev->dev_addr, + &pAC->Addr.Net[1].CurrentMacAddress, 6); + + printk("%s: %s\n", dev->name, pAC->DeviceStr); + printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); + } + } + + /* Save the hardware revision */ + pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + + (pAC->GIni.GIPciHwRev & 0x0F); + + /* Set driver globals */ + pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME; + pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE; + + memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA)); + memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA)); + + pci_set_drvdata(pdev, dev); + return 0; + + out_free_resources: + FreeResources(dev); + out_free_netdev: + free_netdev(dev); + out_disable_device: + pci_disable_device(pdev); + out: + return error; +} + +static void __devexit skge_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = (DEV_NET *) dev->priv; + SK_AC *pAC = pNet->pAC; + int have_second_mac = 0; + + if ((pAC->GIni.GIMacsFound == 2) && pAC->RlmtNets == 2) + have_second_mac = 1; + + unregister_netdev(dev); + if (have_second_mac) + unregister_netdev(pAC->dev[1]); + + SkGeYellowLED(pAC, pAC->IoBase, 0); + + if (pAC->BoardLevel == SK_INIT_RUN) { + SK_EVPARA EvPara; + unsigned long Flags; + + /* board is still alive */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + EvPara.Para32[0] = 0; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + EvPara.Para32[0] = 1; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + SkGeDeInit(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + pAC->BoardLevel = SK_INIT_DATA; + /* We do NOT check here, if IRQ was pending, of course*/ + } + + if (pAC->BoardLevel == SK_INIT_IO) { + /* board is still alive */ + SkGeDeInit(pAC, pAC->IoBase); + pAC->BoardLevel = SK_INIT_DATA; + } + + FreeResources(dev); + free_netdev(dev); + if (have_second_mac) + free_netdev(pAC->dev[1]); + kfree(pAC); +} + +static struct pci_device_id skge_pci_tbl[] = { + { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#if 0 /* don't handle Yukon2 cards at the moment -- mlindner@syskonnect.de */ + { PCI_VENDOR_ID_MARVELL, 0x4360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_MARVELL, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif + { PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver skge_driver = { + .name = "skge", + .id_table = skge_pci_tbl, + .probe = skge_probe_one, + .remove = __devexit_p(skge_remove_one), +}; + +static int __init skge_init(void) +{ + int error; + + memcpy(&SK_Root_Dir_entry, BOOT_STRING, sizeof(SK_Root_Dir_entry) - 1); + +#ifdef CONFIG_PROC_FS + pSkRootDir = proc_mkdir(SK_Root_Dir_entry, proc_net); + if (!pSkRootDir) { + printk(KERN_WARNING "Unable to create /proc/net/%s", + SK_Root_Dir_entry); + return -ENOMEM; + } + pSkRootDir->owner = THIS_MODULE; +#endif + + error = pci_module_init(&skge_driver); + if (error) { +#ifdef CONFIG_PROC_FS + remove_proc_entry(pSkRootDir->name, proc_net); +#endif + } + + return error; +} + +static void __exit skge_exit(void) +{ + pci_unregister_driver(&skge_driver); +#ifdef CONFIG_PROC_FS + remove_proc_entry(pSkRootDir->name, proc_net); +#endif +} + +module_init(skge_init); +module_exit(skge_exit); ===== drivers/net/sk98lin/h/skdrv2nd.h 1.11 vs edited ===== --- 1.11/drivers/net/sk98lin/h/skdrv2nd.h 2004-06-22 16:36:50 +02:00 +++ edited/drivers/net/sk98lin/h/skdrv2nd.h 2004-07-03 21:57:55 +02:00 @@ -53,60 +53,6 @@ #include "h/skrlmt.h" #include "h/skgedrv.h" -#define SK_PCI_ISCOMPLIANT(result, pdev) { \ - result = SK_FALSE; /* default */ \ - /* 3Com (0x10b7) */ \ - if (pdev->vendor == 0x10b7) { \ - /* Gigabit Ethernet Adapter (0x1700) */ \ - if ((pdev->device == 0x1700) || \ - (pdev->device == 0x80eb)) { \ - result = SK_TRUE; \ - } \ - /* SysKonnect (0x1148) */ \ - } else if (pdev->vendor == 0x1148) { \ - /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \ - /* SK-98xx V2.0 Gigabit Ethernet Adapter (0x4320) */ \ - if ((pdev->device == 0x4300) || \ - (pdev->device == 0x4320)) { \ - result = SK_TRUE; \ - } \ - /* D-Link (0x1186) */ \ - } else if (pdev->vendor == 0x1186) { \ - /* Gigabit Ethernet Adapter (0x4c00) */ \ - if ((pdev->device == 0x4c00)) { \ - result = SK_TRUE; \ - } \ - /* Marvell (0x11ab) */ \ - } else if (pdev->vendor == 0x11ab) { \ - /* Gigabit Ethernet Adapter (0x4320) */ \ - /* Gigabit Ethernet Adapter (0x4360) */ \ - /* Gigabit Ethernet Adapter (0x4361) */ \ - /* Belkin (0x5005) */ \ - if ((pdev->device == 0x4320) || \ - (pdev->device == 0x4360) || \ - (pdev->device == 0x4361) || \ - (pdev->device == 0x5005)) { \ - result = SK_TRUE; \ - } \ - /* CNet (0x1371) */ \ - } else if (pdev->vendor == 0x1371) { \ - /* GigaCard Network Adapter (0x434e) */ \ - if ((pdev->device == 0x434e)) { \ - result = SK_TRUE; \ - } \ - /* Linksys (0x1737) */ \ - } else if (pdev->vendor == 0x1737) { \ - /* Gigabit Network Adapter (0x1032) */ \ - /* Gigabit Network Adapter (0x1064) */ \ - if ((pdev->device == 0x1032) || \ - (pdev->device == 0x1064)) { \ - result = SK_TRUE; \ - } \ - } else { \ - result = SK_FALSE; \ - } \ -} - extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned); extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*); - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |