Messages in this thread Patch in this message | | | Date | Tue, 27 Jul 2004 19:09:29 -0400 | From | Alan Cox <> | Subject | PATCH: serial-cs and unusable port size ranges |
| |
A couple of GSM GPRS PCMCIA cards advertise 16 rather than 8 port sized windows for their serial interface. This breaks our current pcmcia serial driver which ignores any windows that are not 8 bytes.
To avoid any regressions on other cards given this driver contains a certain amount of "magic" the patch below looks for 8 byte windows first so will not break existing supported cards (I hope ;))
Patch-by: Alan Cox <alan@redhat.com> OSDL Developer Certiticate Of Origin included herein by reference
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.6.7/drivers/serial/serial_cs.c 2.6.7-ac/drivers/serial/serial_cs.c --- linux-2.6.7/drivers/serial/serial_cs.c 2004-06-16 21:10:07.000000000 +0100 +++ 2.6.7-ac/drivers/serial/serial_cs.c 2004-06-19 14:17:04.000000000 +0100 @@ -366,6 +366,7 @@ static int simple_config(dev_link_t * link) { static ioaddr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + static int size_table[2] = { 8, 16 }; client_handle_t handle = link->handle; struct serial_info *info = link->priv; tuple_t tuple; @@ -374,6 +375,7 @@ cistpl_cftable_entry_t *cf = &parse.cftable_entry; config_info_t config; int i, j, try; + int s; /* If the card is already configured, look up the port and irq */ i = pcmcia_get_configuration_info(handle, &config); @@ -399,29 +401,31 @@ tuple.Attributes = 0; tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; /* Two tries: without IO aliases, then with aliases */ - for (try = 0; try < 2; try++) { - i = first_tuple(handle, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp1 = link->conf.Vpp2 = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link->handle, &link->io); - if (i == CS_SUCCESS) - goto found_port; + for (s = 0; s < 2; s++) + { + for (try = 0; try < 2; try++) { + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if (i != CS_SUCCESS) + goto next_entry; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && + (cf->io.win[0].base != 0)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.IOAddrLines = (try == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + goto found_port; + } + next_entry: + i = next_tuple(handle, &tuple, &parse); } - next_entry: - i = next_tuple(handle, &tuple, &parse); } } - /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |