Messages in this thread | | | Date | Wed, 14 Jul 2004 13:49:51 +1200 (NZST) | From | Martin D Kealey <> | Subject | [KBUG] Oops in kscand |
| |
(My apologies in advance for not being more specific; I've not been involved with Linux Kernel development, and am not familiar with the customs of the community... but I did do OS design & Kernel analysis as a CompSci paper back in 1987 so I can make a few educated guesses. I've included the information suggested by http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html, except that the last crash was a week ago and I wasn't here at the time so my information is limited to log extracts.)
1. Kscand crashed.
2. It appears that the kernel thread for kscand died with a NULL pointer dereference in "page_referenced", from scan_active_list; given that scan_active_list uses "list_for_each_safe/list_entry", this seems quite odd.
3. Kernel
4. Linux version 2.4.20-28.8 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 18 12:53:39 EST 2003
5. ksymoops 2.4.5 on i686 2.4.20-28.8. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.20-28.8/ (default) -m /boot/System.map-2.4.20-28.8 (default)
Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.
Error (expand_objects): cannot stat(/lib/reiserfs.o) for reiserfs Error (expand_objects): cannot stat(/lib/raid1.o) for raid1 Error (expand_objects): cannot stat(/lib/lvm-mod.o) for lvm-mod Error (expand_objects): cannot stat(/lib/aic7xxx.o) for aic7xxx Error (expand_objects): cannot stat(/lib/sd_mod.o) for sd_mod Error (expand_objects): cannot stat(/lib/scsi_mod.o) for scsi_mod Warning (map_ksym_to_module): cannot match loaded module reiserfs to a unique module object. Trace may not be reliable. Jul 5 18:00:09 skud kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000070 Jul 5 18:00:09 skud kernel: c014075e Jul 5 18:00:09 skud kernel: *pde = 00000000 Jul 5 18:00:09 skud kernel: Oops: 0000 Jul 5 18:00:09 skud kernel: CPU: 0 Jul 5 18:00:09 skud kernel: EIP: 0010:[<c014075e>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 Jul 5 18:00:09 skud kernel: EFLAGS: 00010202 Jul 5 18:00:09 skud kernel: eax: c11f3870 ebx: 00000ffc ecx: 00000000 edx: 00000001 Jul 5 18:00:09 skud kernel: esi: 0000001d edi: cd190f00 ebp: 00000001 esp: c1b09f84 Jul 5 18:00:09 skud kernel: ds: 0018 es: 0018 ss: 0018 Jul 5 18:00:09 skud kernel: Process kscand/Normal (pid: 7, stackpage=c1b09000) Jul 5 18:00:09 skud kernel: Stack: cd190b00 00000000 00000001 c1b09fb4 c133b990 c133b990 c030adcc c127cd3c Jul 5 18:00:09 skud kernel: 00000003 c0138bee c1209a98 00000003 00000001 00000003 c1b08000 c030ac80 Jul 5 18:00:09 skud kernel: c1b08000 c0139de4 c030ac80 00000003 00000001 c025cf89 000009c4 00000f00 Jul 5 18:00:09 skud kernel: Call Trace: [<c0138bee>] scan_active_list [kernel] 0x3e (0xc1b09fa8)) Jul 5 18:00:10 skud kernel: [<c0139de4>] kscand [kernel] 0xb4 (0xc1b09fc8)) Jul 5 18:00:10 skud kernel: [<c0105000>] stext [kernel] 0x0 (0xc1b09fe8)) Jul 5 18:00:10 skud kernel: [<c010741e>] arch_kernel_thread [kernel] 0x2e (0xc1b09ff0)) Jul 5 18:00:10 skud kernel: [<c0139d30>] kscand [kernel] 0x0 (0xc1b09ff8)) Jul 5 18:00:10 skud kernel: Code: 8b 41 70 39 41 5c 0f 43 54 24 04 45 4e 89 54 24 04 0f 89 3b
>>EIP; c014075e <page_referenced+21e/2c0> <=====
>>eax; c11f3870 <_end+e3c470/10455c60> >>ebx; 00000ffc Before first symbol >>edi; cd190f00 <_end+cdd9b00/10455c60> >>esp; c1b09f84 <_end+1752b84/10455c60>
Trace; c0138bee <scan_active_list+3e/80> Trace; c0139de4 <kscand+b4/160> Trace; c0105000 <_stext+0/0> Trace; c010741e <arch_kernel_thread+2e/40> Trace; c0139d30 <kscand+0/160>
Code; c014075e <page_referenced+21e/2c0> 00000000 <_EIP>: Code; c014075e <page_referenced+21e/2c0> <===== 0: 8b 41 70 mov 0x70(%ecx),%eax <===== Code; c0140761 <page_referenced+221/2c0> 3: 39 41 5c cmp %eax,0x5c(%ecx) Code; c0140764 <page_referenced+224/2c0> 6: 0f 43 54 24 04 cmovae 0x4(%esp,1),%edx Code; c0140769 <page_referenced+229/2c0> b: 45 inc %ebp Code; c014076a <page_referenced+22a/2c0> c: 4e dec %esi Code; c014076b <page_referenced+22b/2c0> d: 89 54 24 04 mov %edx,0x4(%esp,1) Code; c014076f <page_referenced+22f/2c0> 11: 0f 89 3b 00 00 00 jns 52 <_EIP+0x52>
2 warnings and 6 errors issued. Results may not be reliable.
7.1. Linux skud 2.4.20-28.8 #1 Thu Dec 18 12:53:39 EST 2003 i686 i686 i386 GNU/Linux
Gnu C 3.2 Gnu make 3.79.1 util-linux 2.11r mount 2.11r modutils 2.4.18 e2fsprogs 1.27 jfsutils 1.0.17 reiserfsprogs 3.6.2 PPP 2.4.1 isdn4k-utils 3.1pre4 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 2.0.7 Net-tools 1.60 Kbd 1.06 Sh-utils 2.0.12 Modules Loaded sg binfmt_misc nfsd lockd sunrpc autofs eepro100 mii iptable_filter ip_tables microcode st loop mousedev keybdev hid input usb-uhci usbcore reiserfs raid1 lvm-mod aic7xxx sd_mod scsi_mod
7.2. processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Pentium(R) 4 CPU 1.60GHz stepping : 2 cpu MHz : 1595.318 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3185.04
7.3. sg 36556 0 (autoclean) binfmt_misc 7464 1 nfsd 80272 8 (autoclean) lockd 58864 1 (autoclean) [nfsd] sunrpc 81724 1 (autoclean) [nfsd lockd] autofs 13332 0 (autoclean) (unused) eepro100 22772 1 mii 3976 0 [eepro100] iptable_filter 2412 0 (autoclean) (unused) ip_tables 15096 1 [iptable_filter] microcode 4668 0 (autoclean) st 31628 0 loop 12184 0 (autoclean) mousedev 5588 0 (unused) keybdev 2976 0 (unused) hid 22340 0 (unused) input 5920 0 [mousedev keybdev hid] usb-uhci 26412 0 (unused) usbcore 78944 1 [hid usb-uhci] reiserfs 205520 6 raid1 15212 3 lvm-mod 63936 16 aic7xxx 140980 2 sd_mod 13484 4 scsi_mod 107576 4 [sg st aic7xxx sd_mod]
7.4. [martink@skud linux-2.4.20-28.8]$ cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 1000-10ff : Adaptec AIC-7892A U160/m 1400-14ff : Adaptec AIC-7892A U160/m (#2) 1800-183f : Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller 1800-183f : eepro100 2000-20ff : Intel Corp. 82801BA/BAM AC'97 Audio 2400-243f : Intel Corp. 82801BA/BAM AC'97 Audio 2440-245f : Intel Corp. 82801BA/BAM USB (Hub #1) 2440-245f : usb-uhci 2460-247f : Intel Corp. 82801BA/BAM USB (Hub #2) 2460-247f : usb-uhci 2480-248f : Intel Corp. 82801BA IDE U100 2480-2487 : ide0 2488-248f : ide1
[martink@skud linux-2.4.20-28.8]$ cat /proc/iomem 00000000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c9800-000cafff : Extension ROM 000cb000-000d05ff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ffdffff : System RAM 00100000-0024f069 : Kernel code 0024f06a-00348fc3 : Kernel data 0ffe0000-0fffffff : ACPI Non-volatile Storage f5e00000-f7ffffff : PCI Bus #01 f6000000-f7ffffff : nVidia Corporation NV6 [Vanta] f8000000-fbffffff : Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge fc400000-fc400fff : Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller fc400000-fc400fff : eepro100 fc401000-fc401fff : Adaptec AIC-7892A U160/m fc401000-fc401fff : aic7xxx fc402000-fc402fff : Adaptec AIC-7892A U160/m (#2) fc402000-fc402fff : aic7xxx fd000000-fe1fffff : PCI Bus #01 fd000000-fdffffff : nVidia Corporation NV6 [Vanta] feda0000-ffffffff : reserved
7.5. [martink@skud linux-2.4.20-28.8]$ /sbin/lspci -vvv 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fd000000-fe1fffff Prefetchable memory behind bridge: f5e00000-f7ffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc4fffff Prefetchable memory behind bridge: fff00000-000fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master]) Subsystem: Compaq Computer Corporation: Unknown device 2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at 2480 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation: Unknown device 2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at 2440 [size=32]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation: Unknown device 2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 11 Region 4: I/O ports at 2460 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 12) Subsystem: Compaq Computer Corporation: Unknown device 008a Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at 2000 [size=256] Region 1: I/O ports at 2400 [size=64]
01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta] (rev 15) (prog-if 00 [VGA]) Subsystem: nVidia Corporation: Unknown device 0072 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f6000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: <available only to root>
02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) Subsystem: Compaq Computer Corporation EtherExpress PRO/100 VM Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min, 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 1800 [size=64] Capabilities: <available only to root>
02:09.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160LP Low Profile Ultra160 SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (10000ns min, 6250ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 BIST result: 00 Region 0: I/O ports at 1000 [disabled] [size=256] Region 1: Memory at fc401000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
02:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) Subsystem: Adaptec 29160 Ultra160 SCSI Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (10000ns min, 6250ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 BIST result: 00 Region 0: I/O ports at 1400 [disabled] [size=256] Region 1: Memory at fc402000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: <available only to root>
7.6. [martink@skud linux-2.4.20-28.8]$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: IC35L036UWD210-0 Rev: S5BS Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: IC35L036UWD210-0 Rev: S5BS Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: EXABYTE Model: VXA-2 Rev: 100E Type: Sequential-Access ANSI SCSI revision: 02
-- "War against Terrorism" is an oxymoron
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |