Messages in this thread | | | Date | Wed, 9 Jun 2004 10:31:42 +0200 | From | Sergiusz Pawlowicz <> | Subject | aacraid does not work on dual opteron box - 2.6.7-rc2 |
| |
Hello linux friends, sorry for bothering you, but current aacraid still does not work properly on my fresh dual opteron box & Adaptec 2120S RAID controler. It hungs always after modprobing sd_mod and disk access try.
A was googling last three days without a success - I have no idea what can I do to avoid problems. Did you test aacraid on this Adaptec controler on 64 bits & kernel 2.6.x?
1. Logs ----------------------------------------------------------
Aug 6 18:20:56 amd64 kernel: Red Hat/Adaptec aacraid driver (1.1.2-lk1 Jun 8 2004) Aug 6 18:20:56 amd64 kernel: AAC0: kernel 4.1.4 build 7244 Aug 6 18:20:56 amd64 kernel: AAC0: monitor 4.1.4 build 7244 Aug 6 18:20:56 amd64 kernel: AAC0: bios 4.1.0 build 7244 Aug 6 18:20:56 amd64 kernel: AAC0: serial b95eecfafaf001 Aug 6 18:20:56 amd64 kernel: AAC0: 64 Bit PAE enabled Aug 6 18:20:56 amd64 kernel: scsi0 : aacraid Aug 6 18:20:56 amd64 kernel: Using anticipatory io scheduler Aug 6 18:20:56 amd64 kernel: Vendor: ADAPTEC Model: Adaptec Mirror Rev:V1.0 Aug 6 18:20:56 amd64 kernel: Type: Direct-Access ANSISCSI revision: 02 Aug 6 18:21:17 amd64 kernel: SCSI device sda: 71675392 512-byte hdwr sectors(36698 MB) Aug 6 18:21:17 amd64 kernel: sda: Write Protect is off Aug 6 18:21:17 amd64 kernel: SCSI device sda: drive cache: write through Aug 6 18:21:17 amd64 kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 Aug 6 18:21:17 amd64 kernel: Attached scsi removable disk sda at scsi0,channel 0, id 0, lun 0 Aug 6 18:22:32 amd64 kernel: SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled Aug 6 18:22:32 amd64 kernel: SGI XFS Quota Management subsystem Aug 6 18:22:32 amd64 kernel: XFS: bad magic number Aug 6 18:22:32 amd64 kernel: XFS: SB validate failed Aug 6 18:23:06 amd64 kernel: XFS mounting filesystem sda3 Aug 6 18:25:26 amd64 kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0 Aug 6 18:25:26 amd64 kernel: SCSI error : <0 0 0 0> return code = 0x6000000 Aug 6 18:25:26 amd64 kernel: end_request: I/O error, dev sda, sector 43712887 Aug 6 18:25:26 amd64 kernel: xfs_force_shutdown(sda3,0x2) called from line 959 of file fs/xfs/xfs_log.c. Return address = 0xffffffffa00ff34e
2. Hardware ---------------------------------------------------------- Dual Opteron 240 Mainboard: MSI K8D Master F Adaptec 2120S on PCI-X
lspci -vvv:
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fca00000-feafffff Prefetchable memory behind bridge: fc600000-fc6fffff BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [c0] #08 [0086] Capabilities: [f0] #08 [8000]
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 4: I/O ports at ffa0 [size=16]
00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 19 Region 0: I/O ports at cf80 [size=32]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc900000-fc9fffff Prefetchable memory behind bridge: 00000000f4500000-00000000fc500000 BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [c0] #08 [004a]
00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at febfe000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc800000-fc8fffff Prefetchable memory behind bridge: 00000000f4400000-00000000f4400000 BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000]
00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 0: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101]
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Capabilities: [80] #08 [2101] Capabilities: [a0] #08 [2101] Capabilities: [c0] #08 [2101]
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fc8c0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fc8b0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable+ DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 0000000100000000 Data: 5a6f
01:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) Subsystem: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (16000ns min), cache line size 10 Interrupt: pin B routed to IRQ 30 Region 0: Memory at fc8e0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fc8d0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 0000000100000000 Data: 487f
02:04.0 RAID bus controller: Adaptec AAC-RAID (rev 01) Subsystem: Adaptec 2120S (Crusader) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (250ns min, 250ns max), cache line size 10 Interrupt: pin A routed to IRQ 25 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fc9f0000 [disabled] [size=32K] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (20000ns max) Interrupt: pin D routed to IRQ 19 Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 1310 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 10 Interrupt: pin A routed to IRQ 18 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at b800 [size=256] Region 2: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
3. Kernel ---------------------------------------------------------- Linux amd64 2.6.7 #1 SMP Tue Jun 8 03:21:59 CEST 2004 x86_64 0 unknown PLD Linux = 2.6.7-0.16 (-rc2 with several patches, but not aacraid related)
my .config: http://cvs.pld-linux.org/cgi-bin/cvsweb/SOURCES/kernel-amd64-smp.config?rev=1.1.2.60
compiled by gcc gcc-3.3.3 or gcc-3.4.0 - no difference
Thanks - Sergiusz -- private: http://pawlowicz.name | company: http://a-k-f.com jabber: ser@jabber.org | mobile: +48 502 660860 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |