Messages in this thread | | | Date | Thu, 24 Jun 2004 05:05:22 -0500 (CDT) | From | alftanner@despamme ... | Subject | Sata and pata for SiS 180 |
| |
Hi all
I own a brand new mb for my AMD3200+, Jetway S755max with a Sis chipset 755, southbridge 963 + Sis 180.
I would like to use my Pioneer dvd recorder on the third parallel ide, controlled by the sis 180 chipset. I am running fedora core 1, with kernel-2.4.22-1.2188.nptl. I have tried this patch for kernel 2.4.25
2.4.25-libata16.patch.bz2 found at: http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/old/
and enabled sata_sis.c, compiling it directly in the kernel (not as module).
Unfortunately it is not detected at boot time. The lspci -vv output gives: 00:0c.0 RAID bus controller: Silicon Integrated Systems [SiS]: Unknown device 0180 (prog-if 85) Subsystem: Silicon Integrated Systems [SiS]: Unknown device 0180 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 128 Interrupt: pin A routed to IRQ 12 Region 0: I/O ports at d400 [size=8] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at dc00 [size=8] Region 3: I/O ports at e000 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: I/O ports at <unassigned> Expansion ROM at <unassigned> [disabled] [size=64K]
I have installed the SiS driver and xp is happy with the dvd recorder. It is correctly detected by the bios.
Afterwards, I tried to compile sata_sis as a module.
The parallel Pioneer is still not recognised:
When I modprobe sata_sis I obtain:
libata version 1.02 loaded. ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD802 bmdma 0xE400 irq 12 ata2: SATA max UDMA/133 cmd 0xDC00 ctl 0xE002 bmdma 0xE408 irq 12 ata1: no device found (phy stat 41b7c0c6) ata1: thread exiting i8253 count too high! resetting.. ata2: no device found (phy stat 00ff078b) ata2: thread exiting scsi1 : sata_sis scsi2 : sata_sis i8253 count too high! resetting..
Does it mean that Sis 180 works only with sata, not with its parallel port?
Thanks
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |